define proper settings in full redis example conf

Server_Install_Pack/DB/redis-example.conf

@@ -34,7 +34,7 @@
 
 # On Windows, daemonize and pidfile are not supported.
 # However, you can run redis as a Windows service, and specify a logfile.
-# The logfile will contain the pid. 
+# The logfile will contain the pid.
 
 # Accept connections on the specified port, default is 6379.
 # If port 0 is specified Redis will not listen on a TCP socket.
@@ -57,7 +57,7 @@ tcp-backlog 511
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-# bind 127.0.0.1
+bind 127.0.0.1
 
 
 # Specify the path for the Unix socket that will be used to listen for
@@ -95,12 +95,12 @@ tcp-keepalive 0
 loglevel notice
 
 # Specify the log file name. Also 'stdout' can be used to force
-# Redis to log on the standard output. 
+# Redis to log on the standard output.
 logfile ""
 
-# To enable logging to the Windows EventLog, just set 'syslog-enabled' to 
+# To enable logging to the Windows EventLog, just set 'syslog-enabled' to
 # yes, and optionally update the other syslog parameters to suit your needs.
-# If Redis is installed and launched as a Windows Service, this will 
+# If Redis is installed and launched as a Windows Service, this will
 # automatically be enabled.
 # syslog-enabled no
 
@@ -136,7 +136,7 @@ databases 16
 
 save 900 1
 save 300 10
-save 60 10000
+save 60 1000
 
 # By default Redis will stop accepting writes if RDB snapshots are enabled
 # (at least one save point) and the latest background save failed.
@@ -175,9 +175,9 @@ dbfilename dump.rdb
 #
 # The DB will be written inside this directory, with the filename specified
 # above using the 'dbfilename' configuration directive.
-# 
+#
 # The Append Only File will also be created inside this directory.
-# 
+#
 # Note that you must specify a directory here, not a file name.
 dir ./
 
@@ -378,12 +378,12 @@ slave-priority 100
 #
 # This should stay commented out for backward compatibility and because most
 # people do not need auth (e.g. they run their own servers).
-# 
+#
 # Warning: since Redis is pretty fast an outside user can try up to
 # 150k passwords per second against a good box. This means that you should
 # use a very strong password otherwise it will be very easy to break.
 #
-# requirepass foobared
+requirepass Changeme9832
 
 # Command renaming.
 #
@@ -419,59 +419,59 @@ slave-priority 100
 
 # The Linux version of Redis relies on the system call fork() to perform
 # point-in-time snapshots of the heap. In addition to the AOF and RDB backup
-# mechanism, the master-slave synchronization and clustering features are 
-# dependent on this behavior of fork(). In order for the Windows version to 
+# mechanism, the master-slave synchronization and clustering features are
+# dependent on this behavior of fork(). In order for the Windows version to
 # perform like the Linux version we had to simulate this aspect of fork().
 # Doing so meant moving the Redis heap into a memory mapped file that can
-# be shared with a child process. 
+# be shared with a child process.
 #
-# *** There must be disk space available for this file in order for Redis 
-# to launch. *** The default configuration places this file in the local 
+# *** There must be disk space available for this file in order for Redis
+# to launch. *** The default configuration places this file in the local
 # appdata directory. If you wish to move this file to another local disk,
 # use the heapdir flag as described below.
 #
 # The maxheap flag controls the maximum size of this memory mapped file,
 # as well as the total usable space for the Redis heap. Running Redis
-# without either maxheap or maxmemory will result in a memory mapped file 
-# being created that is equal to the size of physical memory. During 
+# without either maxheap or maxmemory will result in a memory mapped file
+# being created that is equal to the size of physical memory. During
 # fork() operations the total page file commit will max out at around:
 #
 #    (size of physical memory) + (2 * size of maxheap)
 #
-# For instance, on a machine with 8GB of physical RAM, the max page file 
+# For instance, on a machine with 8GB of physical RAM, the max page file
 # commit with the default maxheap size will be (8)+(2*8) GB , or 24GB. The
-# default page file sizing of Windows will allow for this without having 
+# default page file sizing of Windows will allow for this without having
 # to reconfigure the system. Larger heap sizes are possible, but the maximum
 # page file size will have to be increased accordingly.
-# 
-# The Redis heap must be larger than the value specified by the maxmemory 
-# flag, as the heap allocator has its own memory requirements and 
-# fragmentation of the heap is inevitable. If only the maxmemory flag is 
-# specified, maxheap will be set at 1.5*maxmemory. If the maxheap flag is 
-# specified along with maxmemory, the maxheap flag will be automatically 
-# increased if it is smaller than 1.5*maxmemory. 
-#  
+#
+# The Redis heap must be larger than the value specified by the maxmemory
+# flag, as the heap allocator has its own memory requirements and
+# fragmentation of the heap is inevitable. If only the maxmemory flag is
+# specified, maxheap will be set at 1.5*maxmemory. If the maxheap flag is
+# specified along with maxmemory, the maxheap flag will be automatically
+# increased if it is smaller than 1.5*maxmemory.
+#
 # maxheap <bytes>
 
-# The heap memory mapped file must reside on a local path for heap sharing 
-# between processes to work. A UNC path will not suffice here. For maximum 
+# The heap memory mapped file must reside on a local path for heap sharing
+# between processes to work. A UNC path will not suffice here. For maximum
 # performance this should be located on the fastest local drive available.
 # This value defaults to the local application data folder(e.g.,
 # "%USERPROFILE%\AppData\Local"). Since this file can be very large, you
-# may wish to place this on a drive other than the one the operating system  
+# may wish to place this on a drive other than the one the operating system
 # is installed on.
 #
 # Note that you must specify a directory here, not a file name.
 # heapdir <directory path(absolute or relative)>
 
-# If Redis is to be used as an in-memory-only cache without any kind of 
-# persistence, then the fork() mechanism used by the background AOF/RDB 
+# If Redis is to be used as an in-memory-only cache without any kind of
+# persistence, then the fork() mechanism used by the background AOF/RDB
 # persistence is unneccessary. As an optimization, all persistence can be
 # turned off in the Windows version of Redis. This will disable the creation of
-# the memory mapped heap file, redirect heap allocations to the system heap 
+# the memory mapped heap file, redirect heap allocations to the system heap
 # allocator, and disable commands that would otherwise cause fork() operations:
-# BGSAVE and BGREWRITEAOF. This flag may not be combined with any of the other 
-# flags that configure AOF and RDB operations. 
+# BGSAVE and BGREWRITEAOF. This flag may not be combined with any of the other
+# flags that configure AOF and RDB operations.
 # persistence-available [(yes)|no]
 
 # Don't use more memory than the specified amount of bytes.
@@ -512,18 +512,18 @@ slave-priority 100
 # Peak Working Set reported by the Windows Task Manager and the used_memory_peak
 # reported by the INFO command.
 #
-# maxmemory <bytes>
+maxmemory 1gb
 
 # MAXMEMORY POLICY: how Redis will select what to remove when maxmemory
 # is reached. You can select among five behaviors:
-# 
+#
 # volatile-lru -> remove the key with an expire set using an LRU algorithm
 # allkeys-lru -> remove any key according to the LRU algorithm
 # volatile-random -> remove a random key with an expire set
 # allkeys-random -> remove a random key, any key
 # volatile-ttl -> remove the key with the nearest expire time (minor TTL)
 # noeviction -> don't expire at all, just return an error on write operations
-# 
+#
 # Note: with any of the above policies, Redis will return an error on write
 #       operations, when there are no suitable keys for eviction.
 #
@@ -612,7 +612,7 @@ appendfsync everysec
 # the same as "appendfsync none". In practical terms, this means that it is
 # possible to lose up to 30 seconds of log in the worst scenario (with the
 # default Linux settings).
-# 
+#
 # If you have latency problems turn this to "yes". Otherwise leave it as
 # "no" that is the safest pick from the point of view of durability.
 no-appendfsync-on-rewrite no
@@ -620,7 +620,7 @@ no-appendfsync-on-rewrite no
 # Automatic rewrite of the append only file.
 # Redis is able to automatically rewrite the log file implicitly calling
 # BGREWRITEAOF when the AOF log size grows by the specified percentage.
-# 
+#
 # This is how it works: Redis remembers the size of the AOF file after the
 # latest rewrite (if no rewrite has happened since the restart, the size of
 # the AOF at startup is used).
@@ -687,7 +687,7 @@ lua-time-limit 5000
 # but just the time needed to actually execute the command (this is the only
 # stage of command execution where the thread is blocked and can not serve
 # other requests in the meantime).
-# 
+#
 # You can configure the slow log with two parameters: one tells Redis
 # what is the execution time, in microseconds, to exceed in order for the
 # command to get logged, and the other parameter is the length of the
@@ -818,7 +818,7 @@ hll-sparse-max-bytes 3000
 # that is rehashing, the more rehashing "steps" are performed, so if the
 # server is idle the rehashing is never complete and some more memory is used
 # by the hash table.
-# 
+#
 # The default is to use this millisecond 10 times every second in order to
 # actively rehash the main dictionaries, freeing memory when possible.
 #