2015-08-28 16:37:23 +00:00
/*
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
DMS post-init
Created by eraser1 and Defent
2015-08-28 16:37:23 +00:00
*/
2015-08-27 07:44:23 +00:00
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
if !(isServer) exitWith
{
for "_i" from 0 to 99 do
{
2015-11-01 18:27:37 +00:00
diag_log "The DMS PBO is for the SERVER ONLY. It will NOT work for any form of client! DMS launch cancelled.";
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
};
};
2015-11-15 02:08:41 +00:00
if (isNil "DMS_DynamicMission") exitWith
{
for "_i" from 0 to 99 do
{
diag_log "DMS ERROR :: You have made an error in your DMS config.sqf! Cancelling DMS Launch.";
};
};
2015-12-24 19:45:20 +00:00
// This code is NECESSARY for spawning persistent vehicles. DO NOT REMOVE THIS CODE UNLESS YOU KNOW WHAT YOU ARE DOING
if !("isKnownAccount:76561198027700602" call ExileServer_system_database_query_selectSingleField) then
{
"createAccount:76561198027700602:eraser1" call ExileServer_system_database_query_fireAndForget;
};
// Some custom maps don't have the proper safePos config entries.
// If you are using one and you have an issue with mission spawns, please create an issue on GitHub or post a comment in the DMS thread.
switch (toLower worldName) do
{
case "altis": // [16000,16000] w/ radius of 16000 works well for Altis
{
DMS_MapCenterPos = [16000,16000];
DMS_MapRadius = 16000;
};
case "bornholm": // Thanks to thirdhero for testing this info
{
DMS_MapCenterPos = [11265,11265];
DMS_MapRadius = 12000;
};
case "esseker": // Thanks to Flowrider for this info
{
DMS_MapCenterPos = [6275,6350];
DMS_MapRadius = 5000;
};
case "tavi": // Thanks to JamieKG for this info
{
DMS_MapCenterPos = [12800,12800];
DMS_MapRadius = 12800;
};
default // Use "worldSize" to determine map center/radius (not always very nice).
{
private "_middle";
_middle = worldSize/2;
DMS_MapCenterPos = [_middle,_middle];
DMS_MapRadius = _middle;
};
};
// Since we use primarily ATL
DMS_MapCenterPos set [2,0];
2015-11-15 02:08:41 +00:00
2015-08-27 07:44:23 +00:00
RESISTANCE setFriend[WEST,0];
WEST setFriend[RESISTANCE,0];
RESISTANCE setFriend[EAST,0];
EAST setFriend[RESISTANCE,0];
EAST setFriend[WEST,0];
WEST setFriend[EAST,0];
2015-11-15 02:08:41 +00:00
2015-09-20 20:26:08 +00:00
if ((!isNil "A3XAI_isActive") && {!DMS_ai_offload_Only_DMS_AI}) then
{
diag_log 'DMS DETECTED A3XAI. Enabling "DMS_ai_offload_Only_DMS_AI"!';
2015-09-20 20:30:21 +00:00
DMS_ai_offload_Only_DMS_AI = true;
2015-09-20 20:26:08 +00:00
};
2015-11-15 02:08:41 +00:00
if ((isClass (configFile >> "CfgPatches" >> "Ryanzombies")) && {!DMS_ai_offload_Only_DMS_AI}) then
{
diag_log 'DMS DETECTED RyanZombies. Enabling "DMS_ai_offload_Only_DMS_AI"!';
DMS_ai_offload_Only_DMS_AI = true;
};
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
DMS_A3_AllMarkerColors = [];
for "_i" from 0 to ((count(configfile >> "CfgMarkerColors"))-1) do
2015-09-03 06:44:56 +00:00
{
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
DMS_A3_AllMarkerColors pushBack (toLower (configName ((configfile >> "CfgMarkerColors") select _i)));
2015-08-27 07:44:23 +00:00
};
2015-10-05 03:27:22 +00:00
2015-11-15 02:08:41 +00:00
if !((toLower DMS_MissionMarkerWinDotColor) in DMS_A3_AllMarkerColors) then
{
diag_log format ["DMS ERROR :: Unsupported color for DMS_MissionMarkerWinDotColor (""%1""). Switching color to ""ColorBlue"".",DMS_MissionMarkerWinDotColor];
DMS_MissionMarkerWinDotColor = "ColorBlue";
};
if !((toLower DMS_MissionMarkerLoseDotColor) in DMS_A3_AllMarkerColors) then
{
diag_log format ["DMS ERROR :: Unsupported color for DMS_MissionMarkerLoseDotColor (""%1""). Switching color to ""ColorRed"".",DMS_MissionMarkerLoseDotColor];
DMS_MissionMarkerLoseDotColor = "ColorRed";
};
// Create and send Client Functions using compileFinal for security.
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
DMS_CLIENT_fnc_spawnDynamicText = compileFinal
("
[
_this,
0,
safeZoneY,
"+str DMS_dynamicText_Duration+",
"+str DMS_dynamicText_FadeTime+",
0,
24358
] spawn BIS_fnc_dynamicText;
");
publicVariable "DMS_CLIENT_fnc_spawnDynamicText";
DMS_CLIENT_fnc_spawnTextTiles = compileFinal
("
[
parseText _this,
Major UI Improvements, Fixes, Improved readme
* **NEW CONFIG VALUES**:
|DMS_Show_Kill_Poptabs_Notification|
|DMS_Show_Kill_Respect_Notification|
|DMS_dynamicText_Duration|
|DMS_dynamicText_FadeTime|
|DMS_dynamicText_Title_Size|
|DMS_dynamicText_Title_Font|
|DMS_dynamicText_Message_Color|
|DMS_dynamicText_Message_Size|
|DMS_dynamicText_Message_Font|
|DMS_standardHint_Title_Size|
|DMS_standardHint_Title_Font|
|DMS_standardHint_Message_Color|
|DMS_standardHint_Message_Size|
|DMS_standardHint_Message_Font|
|DMS_textTiles_Duration|
|DMS_textTiles_FadeTime|
|DMS_textTiles_Title_Size|
|DMS_textTiles_Title_Font|
|DMS_textTiles_Message_Color|
|DMS_textTiles_Message_Size|
|DMS_textTiles_Message_Font|
* "DMS_PlayerNotificationTypes" has been adjusted to include
"systemChatRequest" and the brand new "textTilesRequest". **NOTE:** Due
to the way "text tiles" work, a player can only have one on his screen
at a time. As a result, if another text tile is created while the
mission message is up, the message will immediately disappear to display
the new text tile. Currently, the "Frag Messages" (the ones that say
"Player Kill +100") use text tiles. I don't think it should be a major
issue (especially if you use "systemChatRequest", so the player can just
scroll up), but if I get reports of it being stupid, I will default to
"dynamicTextRequest", which should also look pretty damn nice.
* These changes should make it much easier for people to use DMS
notification functions for other purposes.
* Fixed AI waypoints - the AI should now properly circle the objective
at the proper radius.
* Tweaked "DMS_AI_WP_Radius_moderate" and "DMS_AI_WP_Radius_difficult"
(reduced the radii). Due to the AI pathing fix.
* Fixed a couple typos in "DMS_fnc_SpawnAISoldier". "_customGearSet"
should work now (although I'm fairly certain nobody uses it since nobody
ever complained :P )
* Improved "DMS_fnc_SpawnNonPersistentVehicle"; Vehicles should no
longer spawn jumbled up in most cases (like cardealer). Also, it's
updated to the latest Exile methods to ensure that vehicles have no
nightvision/thermal if configured to do so in Exile configs. Also added
the "MPKilled" EH used by Exile for non-persistent (persistent vehicles
already had it).
* You can now choose whether or not you want to display the poptabs or
respect kill messages when killing an AI with
"DMS_Show_Kill_Poptabs_Notification" and
"DMS_Show_Kill_Respect_Notification". Both are enabled by default.
* Fixed typos in the "OnKilled" EH (didn't really affect anything)
* Fixed cases when "currentMuzzle" would return a number. Thanks to
[azmodii](https://github.com/azmodii) for the reminder.
* Optimized the "AI share info" function in "OnKilled"
2015-10-09 00:16:48 +00:00
[
0,
safeZoneY,
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
1,
1
],
[10,10],
"+str DMS_textTiles_Duration+",
"+str DMS_textTiles_FadeTime+",
0
] spawn BIS_fnc_textTiles;
");
publicVariable "DMS_CLIENT_fnc_spawnTextTiles";
Major UI Improvements, Fixes, Improved readme
* **NEW CONFIG VALUES**:
|DMS_Show_Kill_Poptabs_Notification|
|DMS_Show_Kill_Respect_Notification|
|DMS_dynamicText_Duration|
|DMS_dynamicText_FadeTime|
|DMS_dynamicText_Title_Size|
|DMS_dynamicText_Title_Font|
|DMS_dynamicText_Message_Color|
|DMS_dynamicText_Message_Size|
|DMS_dynamicText_Message_Font|
|DMS_standardHint_Title_Size|
|DMS_standardHint_Title_Font|
|DMS_standardHint_Message_Color|
|DMS_standardHint_Message_Size|
|DMS_standardHint_Message_Font|
|DMS_textTiles_Duration|
|DMS_textTiles_FadeTime|
|DMS_textTiles_Title_Size|
|DMS_textTiles_Title_Font|
|DMS_textTiles_Message_Color|
|DMS_textTiles_Message_Size|
|DMS_textTiles_Message_Font|
* "DMS_PlayerNotificationTypes" has been adjusted to include
"systemChatRequest" and the brand new "textTilesRequest". **NOTE:** Due
to the way "text tiles" work, a player can only have one on his screen
at a time. As a result, if another text tile is created while the
mission message is up, the message will immediately disappear to display
the new text tile. Currently, the "Frag Messages" (the ones that say
"Player Kill +100") use text tiles. I don't think it should be a major
issue (especially if you use "systemChatRequest", so the player can just
scroll up), but if I get reports of it being stupid, I will default to
"dynamicTextRequest", which should also look pretty damn nice.
* These changes should make it much easier for people to use DMS
notification functions for other purposes.
* Fixed AI waypoints - the AI should now properly circle the objective
at the proper radius.
* Tweaked "DMS_AI_WP_Radius_moderate" and "DMS_AI_WP_Radius_difficult"
(reduced the radii). Due to the AI pathing fix.
* Fixed a couple typos in "DMS_fnc_SpawnAISoldier". "_customGearSet"
should work now (although I'm fairly certain nobody uses it since nobody
ever complained :P )
* Improved "DMS_fnc_SpawnNonPersistentVehicle"; Vehicles should no
longer spawn jumbled up in most cases (like cardealer). Also, it's
updated to the latest Exile methods to ensure that vehicles have no
nightvision/thermal if configured to do so in Exile configs. Also added
the "MPKilled" EH used by Exile for non-persistent (persistent vehicles
already had it).
* You can now choose whether or not you want to display the poptabs or
respect kill messages when killing an AI with
"DMS_Show_Kill_Poptabs_Notification" and
"DMS_Show_Kill_Respect_Notification". Both are enabled by default.
* Fixed typos in the "OnKilled" EH (didn't really affect anything)
* Fixed cases when "currentMuzzle" would return a number. Thanks to
[azmodii](https://github.com/azmodii) for the reminder.
* Optimized the "AI share info" function in "OnKilled"
2015-10-09 00:16:48 +00:00
2015-11-15 02:08:41 +00:00
// Add the weighted predefined locations to the list of predefined locations
{
for "_i" from 1 to (_x select 1) do
{
DMS_PredefinedMissionLocations pushBack (_x select 0);
};
} forEach DMS_PredefinedMissionLocations_WEIGHTED;
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
// Set up the minimum/maximum co-ordinate values for x and y...
DMS_MinMax_X_Coords = [DMS_MinDistFromWestBorder, worldSize - DMS_MinDistFromEastBorder];
DMS_MinMax_Y_Coords = [DMS_MinDistFromSouthBorder, worldSize - DMS_MinDistFromNorthBorder];
2015-11-15 02:08:41 +00:00
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
if (DMS_DynamicMission || {DMS_StaticMission}) then
{
call compileFinal preprocessFileLineNumbers "\x\addons\dms\missions\static_init.sqf";
2015-10-05 03:27:22 +00:00
2015-08-29 01:08:45 +00:00
call compileFinal preprocessFileLineNumbers "\x\addons\dms\missions\mission_init.sqf";
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
if (DMS_ShowDifficultyColorLegend) then
{
private "_title";
_title = createmarker ["DMS_MissionMarker_DifficultyColorLegend",[-500,-200]];
_title setMarkerColor "ColorRed";
_title setmarkertext "DMS Mission Difficulties Color Legend";
_title setMarkerType "mil_dot";
_title setMarkerAlpha 0.5;
{
private ["_difficulty", "_color", "_num", "_pos", "_circle", "_dot"];
_difficulty = _x;
switch (_difficulty) do
{
case "easy": {_color = "ColorGreen";};
case "moderate": {_color = "ColorYellow";};
case "difficult": {_color = "ColorRed";};
case "hardcore" : {_color = "ColorBlack";};
};
_num = -200 * (_forEachIndex - 0.5);
_pos = [100,_num];
_circle = createMarker [format ["DMS_MissionMarker_DifficultyColor_%1",_color], _pos];
_circle setMarkerColor _color;
_circle setMarkerShape "ELLIPSE";
_circle setMarkerBrush "Solid";
_circle setMarkerSize [100,100];
_dot = createMarker [format ["DMS_MissionMarker_Difficulty_%1",_difficulty],_pos];
_dot setMarkerColor "ColorWhite";
_dot setMarkerType "mil_dot";
_dot setMarkerAlpha 0.5;
_dot setMarkerText _difficulty;
} forEach ["hardcore","difficult","moderate","easy"];
};
2015-08-29 02:00:20 +00:00
execFSM "\x\addons\dms\FSM\missions.fsm";
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
}
else
{
2015-12-24 19:45:20 +00:00
diag_log "Enjoy DMS functions! :)";
2015-08-29 02:00:20 +00:00
};
I know... it's been over a week... gimme a break
#### October 17, 2015 (2:30 PM CST-America):
* **NEW CONFIG VALUES**:
|DMS_TimeToFirstMission|
|DMS_ShowDifficultyColorLegend|
|DMS_TerritoryNearBlacklist|
|DMS_MinSurfaceNormal| (Used to be DMS_MaxSurfaceNormal, simply renamed)
|DMS_ai_launchers_per_group|
* **UPDATING ALL OF YOUR MISSION FILES IS HIGHLY RECOMMENDED UNLESS YOU
KNOW WHAT YOU'RE DOING**
* RENAMED "DMS_MaxSurfaceNormal" to "DMS_MinSurfaceNormal". I must have
been very tired when I named it...
* DMS_MinSurfaceNormal is now 0.9 by default, but will be 0.95 for Altis
and Bornholm (since they're relatively large/flat maps). Esseker is
still 0.85. If you want to convert DMS_MinSurfaceNormal to degrees, you
would take the arc-cosine of the surfaceNormal, and that will give you
the degrees from horizontal. For example, arccos(0.9) is about 25
degrees. Google: "arccos(0.9) in degrees"
* Tweaked and rebalanced "DMS_BanditMissionTypes". Most of the spawn
chances are the same, they're just reduced in order to prevent the
creation of arrays that are far larger than they need to be.
* You can now manually define how long it takes for the first mission to
spawn after a restart.
* DMS will now by default create markers on the bottom left of the map
to show which colors correspond to which difficulty. It isn't very
pretty, but it gets the point across.
* DMS will now manually calculate the center of the map and its radius,
if it isn't preconfigured by DMS.
* You can now specify the vehicles to spawn for missions: "bandits",
"cardealer", "construction", "donthasslethehoff", and "thieves".
* You can now specify the spawning location of any mission (and whether
or not to use an alternative location if the provided location is
invalid). This will allow for easy integration of DMS into admin tools.
* Added support for scripts to be executed on mission completion or
mission failure (this will allow you to have "multi-part" missions,
where you would simply spawn the next part of the mission if the
previous is completed).
* Restructured DMS_DEBUG from the previous patch in favor of a more
"optimized" method.
* DMS_fnc_findSafePos is completely overhauled; DMS no longer uses
"BIS_fnc_findSafePos". It also now throttles minSurfaceNormal on
repeated failure. You can now determine whether or not the mission
should spawn on water (however, I don't suggest you use this function
for water spawns yet).
* You can also now define a minimum distance from other territories for
missions.
* DMS_fnc_IsValidPosition will now check for water depth if the provided
position is meant to be checked as a "water spawn". It will now also
check for nearby missions from A3XAI or VEMF (untested).
* DMS_fnc_IsValidPosition now checks whether or not the position is
outside of the map borders.
* DMS_fnc_SelectOffsetPos will now return the 3rd element of the
provided position as-is.
* You can now have multiple AI within a group with a launcher.
* AI now have a 5-second godmode after spawning.
* You can now spawn a crate using ASL pos. DMS_fnc_SpawnCrate will also
make sure that the provided classname is valid.
* Just like SpawnCrate, "DMS_fnc_SpawnNonPersistentVehicle" and
"DMS_fnc_SpawnPersistentVehicle" will now make sure that the provided
classname is valid.
* "DMS_fnc_SpawnPersistentVehicle" now supports ASL spawning.
* Added support for [Rod Serling's](https://github.com/Rod-Serling) AVS.
* General optimization.
2015-10-17 19:39:07 +00:00
2015-12-24 19:45:20 +00:00
{
[_x] call DMS_fnc_ImportFromM3E_Static; // Spawn all of the bases that are supposed to be spawned on server startup.
} forEach DMS_BasesToImportOnServerStart;
I know... it's been over a week... gimme a break
#### October 17, 2015 (2:30 PM CST-America):
* **NEW CONFIG VALUES**:
|DMS_TimeToFirstMission|
|DMS_ShowDifficultyColorLegend|
|DMS_TerritoryNearBlacklist|
|DMS_MinSurfaceNormal| (Used to be DMS_MaxSurfaceNormal, simply renamed)
|DMS_ai_launchers_per_group|
* **UPDATING ALL OF YOUR MISSION FILES IS HIGHLY RECOMMENDED UNLESS YOU
KNOW WHAT YOU'RE DOING**
* RENAMED "DMS_MaxSurfaceNormal" to "DMS_MinSurfaceNormal". I must have
been very tired when I named it...
* DMS_MinSurfaceNormal is now 0.9 by default, but will be 0.95 for Altis
and Bornholm (since they're relatively large/flat maps). Esseker is
still 0.85. If you want to convert DMS_MinSurfaceNormal to degrees, you
would take the arc-cosine of the surfaceNormal, and that will give you
the degrees from horizontal. For example, arccos(0.9) is about 25
degrees. Google: "arccos(0.9) in degrees"
* Tweaked and rebalanced "DMS_BanditMissionTypes". Most of the spawn
chances are the same, they're just reduced in order to prevent the
creation of arrays that are far larger than they need to be.
* You can now manually define how long it takes for the first mission to
spawn after a restart.
* DMS will now by default create markers on the bottom left of the map
to show which colors correspond to which difficulty. It isn't very
pretty, but it gets the point across.
* DMS will now manually calculate the center of the map and its radius,
if it isn't preconfigured by DMS.
* You can now specify the vehicles to spawn for missions: "bandits",
"cardealer", "construction", "donthasslethehoff", and "thieves".
* You can now specify the spawning location of any mission (and whether
or not to use an alternative location if the provided location is
invalid). This will allow for easy integration of DMS into admin tools.
* Added support for scripts to be executed on mission completion or
mission failure (this will allow you to have "multi-part" missions,
where you would simply spawn the next part of the mission if the
previous is completed).
* Restructured DMS_DEBUG from the previous patch in favor of a more
"optimized" method.
* DMS_fnc_findSafePos is completely overhauled; DMS no longer uses
"BIS_fnc_findSafePos". It also now throttles minSurfaceNormal on
repeated failure. You can now determine whether or not the mission
should spawn on water (however, I don't suggest you use this function
for water spawns yet).
* You can also now define a minimum distance from other territories for
missions.
* DMS_fnc_IsValidPosition will now check for water depth if the provided
position is meant to be checked as a "water spawn". It will now also
check for nearby missions from A3XAI or VEMF (untested).
* DMS_fnc_IsValidPosition now checks whether or not the position is
outside of the map borders.
* DMS_fnc_SelectOffsetPos will now return the 3rd element of the
provided position as-is.
* You can now have multiple AI within a group with a launcher.
* AI now have a 5-second godmode after spawning.
* You can now spawn a crate using ASL pos. DMS_fnc_SpawnCrate will also
make sure that the provided classname is valid.
* Just like SpawnCrate, "DMS_fnc_SpawnNonPersistentVehicle" and
"DMS_fnc_SpawnPersistentVehicle" will now make sure that the provided
classname is valid.
* "DMS_fnc_SpawnPersistentVehicle" now supports ASL spawning.
* Added support for [Rod Serling's](https://github.com/Rod-Serling) AVS.
* General optimization.
2015-10-17 19:39:07 +00:00
2015-12-24 19:45:20 +00:00
format ["DMS post-init complete. productVersion: %1 | infiSTAR version: %2", productVersion, if (!isNil "INFISTARVERSION") then {INFISTARVERSION} else {"not installed"}] call DMS_fnc_DebugLog;
