Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
/*
"saltflats" static mission for Altis.
Created by eraser1
Credits to "Darth Rogue" for creating the base.
*/
// For logging purposes
_num = DMS_MissionCount;
// Set mission side (only "bandit" is supported for now)
_side = "bandit";
_pos = [23300,18800,0];
if ([_pos,DMS_StaticMinPlayerDistance] call DMS_fnc_IsPlayerNearby) exitWith {"delay"};
// Set general mission difficulty
_difficulty = "hardcore";
2015-11-15 02:08:41 +00:00
// Define spawn locations for AI Soldiers. These will be used for the initial spawning of AI as well as reinforcements.
// The center spawn location is added 3 times so at least 3 AI will spawn initially at the center location, and so that future reinforcements are more likely to spawn at the center.
_AISoldierSpawnLocations =
[
_pos,
_pos,
_pos,
[23500,18750,0.5],
[23498,18715,0.5],
[23461,18478.2,0],
[23443,18495.3,0],
[23424,18479.4,0],
[23405.9,18497,0],
[23387.1,18479.7,0],
[23378.3,18497.6,0],
[23359.2,18480,0],
[23334.9,18479.2,0],
[23295.1,18515.4,3.12796],
[23242.7,18793.5,0.5],
[23387.2,18638.5,0.5],
[23294.6,18640.8,0.2],
[23309.1,18683.1,0.6],
[23308.5,18683,4],
[23360.5,18686.3,4],
[23362.9,18679,0.6],
[23403.1,18685.1,0.6],
[23420.9,18839.6,4.35],
[23420.8,18843.4,12.35],
[23421,18838.6,0.36],
[23422.2,18823.8,0.4],
[23502.1,18862.3,15.37],
[23494.2,18478.6,15.37],
[23206.6,18493.8,15.37],
[23239.4,18561.1,0]
];
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
// Create AI
_AICount = 20 + (round (random 5));
2015-11-19 01:49:08 +00:00
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
_group =
[
2015-11-15 02:08:41 +00:00
_AISoldierSpawnLocations,
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
_AICount,
_difficulty,
"random",
_side
2015-11-15 02:08:41 +00:00
] call DMS_fnc_SpawnAIGroup_MultiPos;
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
_staticGuns =
[
[
2015-11-15 02:08:41 +00:00
//[23424.4,18844.1,15.33], // Top of the construction building. I added this and I thought it may be too much. Your choice if you want to uncomment ;)
_pos vectorAdd [5,0,0], // 5 meters East of center pos
_pos vectorAdd [-5,0,0], // 5 meters West of center pos
_pos vectorAdd [0,5,0], // 5 meters North of center pos
_pos vectorAdd [0,-5,0], // 5 meters South of center pos
[23216.3,18863.6,20.5], // Top of NorthWest Tower
[23506.6,18867.6,20.5], // Top of NorthEast Tower
[23497.9,18483.8,20.5], // Top of SouthEast Tower
[23211.1,18489.3,20.5], // Top of SouthWest Tower
[23509.7,18788.1,22.52] // Top of the concrete water tower thing.
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
],
_group,
"assault",
_difficulty,
"bandit",
2015-11-19 01:49:08 +00:00
"random"
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
] call DMS_fnc_SpawnAIStaticMG;
2015-11-19 01:49:08 +00:00
// Create Crate
_crateClassname = "I_CargoNet_01_ammo_F";
deleteVehicle (nearestObject [_pos, _crateClassname]); // Make sure to remove any previous crate.
_crate = [_crateClassname, _pos] call DMS_fnc_SpawnCrate;
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
2015-11-19 01:49:08 +00:00
// Spawn the vehicle AFTER the base so that it spawns the vehicle in a (relatively) clear position.
_veh =
[
[
[_pos,100,random 360] call DMS_fnc_SelectOffsetPos,
_pos
],
_group,
"assault",
_difficulty,
_side
] call DMS_fnc_SpawnAIVehicle;
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
// Define mission-spawned AI Units
_missionAIUnits =
[
_group // We only spawned the single group for this mission
];
// Define the group reinforcements
_groupReinforcementsInfo =
[
[
_group, // pass the group
[
[
5, // Only 5 "waves" (5 vehicles can spawn as reinforcement)
0
],
[
-1, // No need to limit the number of units since we're limiting "waves"
0
]
],
[
300, // At least a 5 minute delay between reinforcements.
diag_tickTime
],
[
[23239.7,18865.8,0],
[23397,18862.8,0],
[23485.5,18861.3,0],
[23486,18683.9,0],
[23493.1,18515.5,0],
[23873.8,19413.2,0],
[23211.9,18572.5,0],
[23212.9,18751.7,0],
[23211.5,18809.1,0]
],
"random",
_difficulty,
_side,
"armed_vehicle",
[
7, // Reinforcements will only trigger if there's fewer than 7 members left in the group
"random" // Select a random armed vehicle from "DMS_ArmedVehicles"
]
],
[
_group, // pass the group (again)
[
[
0, // Let's limit number of units instead...
0
],
[
100, // Maximum 100 units can be given as reinforcements.
0
]
],
[
240, // About a 4 minute delay between reinforcements.
diag_tickTime
],
2015-11-15 02:08:41 +00:00
_AISoldierSpawnLocations,
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
"random",
_difficulty,
_side,
"reinforce",
[
10, // Reinforcements will only trigger if there's fewer than 10 members left in the group
7 // 7 reinforcement units per wave.
]
]
];
// Define mission-spawned objects and loot values
_missionObjs =
[
_staticGuns+[_veh], // armed AI vehicle and static gun(s). Note, we don't add the base itself because we don't want to delete it and respawn it if the mission respawns.
[],
[[_crate,[75,250,25]]]
];
// Define Mission Start message
_msgStart = ['#FFFF00', "A heavily guarded base has been located on the salt flats! There are reports they have a large weapon cache..."];
// Define Mission Win message
_msgWIN = ['#0080ff',"Convicts have successfully assaulted the base on the salt flats and secured the cache!"];
// Define Mission Lose message
_msgLOSE = ['#FF0000',"Seems like the guards got bored and left the base, taking the cache with them..."];
// Define mission name (for map marker and logging)
2015-12-24 19:45:20 +00:00
_missionName = "Mercenary Base";
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
// Create Markers
_markers =
[
_pos,
_missionName,
_difficulty
] call DMS_fnc_CreateMarker;
2015-12-24 19:45:20 +00:00
(_markers select 1) setMarkerSize [750,750];
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
// Record time here (for logging purposes, otherwise you could just put "diag_tickTime" into the "DMS_AddMissionToMonitor" parameters directly)
_time = diag_tickTime;
// Parse and add mission info to missions monitor
_added =
[
_pos,
[
[
"kill",
_group
],
[
"playerNear",
[_pos,100]
]
],
_groupReinforcementsInfo,
[
_time,
DMS_StaticMissionTimeOut call DMS_fnc_SelectRandomVal
],
_missionAIUnits,
_missionObjs,
[_missionName,_msgWIN,_msgLOSE],
_markers,
_side,
_difficulty,
2015-12-24 19:45:20 +00:00
[]
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
] call DMS_fnc_AddMissionToMonitor_Static;
// Check to see if it was added correctly, otherwise delete the stuff
if !(_added) exitWith
{
diag_log format ["DMS ERROR :: Attempt to set up mission %1 with invalid parameters for DMS_fnc_AddMissionToMonitor_Static! Deleting mission objects and resetting DMS_MissionCount.",_missionName];
_cleanup = [];
{
_cleanup pushBack _x;
} forEach _missionAIUnits;
_cleanup pushBack ((_missionObjs select 0)+(_missionObjs select 1));
{
_cleanup pushBack (_x select 0);
} foreach (_missionObjs select 2);
_cleanup call DMS_fnc_CleanUp;
// Delete the markers directly
{deleteMarker _x;} forEach _markers;
// Reset the mission count
DMS_MissionCount = DMS_MissionCount - 1;
};
// Notify players
[_missionName,_msgStart] call DMS_fnc_BroadcastMissionStatus;
if (DMS_DEBUG) then
{
(format ["MISSION: (%1) :: Mission #%2 started at %3 with %4 AI units and %5 difficulty at time %6",_missionName,_num,_pos,_AICount,_difficulty,_time]) call DMS_fnc_DebugLog;
};