2015-08-28 21:52:56 +00:00
/*
2015-10-04 03:32:42 +00:00
DMS_fnc_FindSafePos
2015-08-28 21:52:56 +00:00
Created by eraser1
2015-10-04 03:32:42 +00:00
ALL PARAMETERS ARE OPTIONAL (as long as configs are properly defined).
Excluding parameters will create some RPT spam, but it's not too much of an issue.
2015-08-28 21:52:56 +00:00
Usage:
[
2015-10-04 03:32:42 +00:00
_nearestObjectMinDistance, // NUMBER (distance): Minimum distance from the nearest object.
_waterNearLimit, // NUMBER (distance): Minimum distance from water.
I know... it's been over a week... gimme a break
#### October 17, 2015 (2:30 PM CST-America):
* **NEW CONFIG VALUES**:
|DMS_TimeToFirstMission|
|DMS_ShowDifficultyColorLegend|
|DMS_TerritoryNearBlacklist|
|DMS_MinSurfaceNormal| (Used to be DMS_MaxSurfaceNormal, simply renamed)
|DMS_ai_launchers_per_group|
* **UPDATING ALL OF YOUR MISSION FILES IS HIGHLY RECOMMENDED UNLESS YOU
KNOW WHAT YOU'RE DOING**
* RENAMED "DMS_MaxSurfaceNormal" to "DMS_MinSurfaceNormal". I must have
been very tired when I named it...
* DMS_MinSurfaceNormal is now 0.9 by default, but will be 0.95 for Altis
and Bornholm (since they're relatively large/flat maps). Esseker is
still 0.85. If you want to convert DMS_MinSurfaceNormal to degrees, you
would take the arc-cosine of the surfaceNormal, and that will give you
the degrees from horizontal. For example, arccos(0.9) is about 25
degrees. Google: "arccos(0.9) in degrees"
* Tweaked and rebalanced "DMS_BanditMissionTypes". Most of the spawn
chances are the same, they're just reduced in order to prevent the
creation of arrays that are far larger than they need to be.
* You can now manually define how long it takes for the first mission to
spawn after a restart.
* DMS will now by default create markers on the bottom left of the map
to show which colors correspond to which difficulty. It isn't very
pretty, but it gets the point across.
* DMS will now manually calculate the center of the map and its radius,
if it isn't preconfigured by DMS.
* You can now specify the vehicles to spawn for missions: "bandits",
"cardealer", "construction", "donthasslethehoff", and "thieves".
* You can now specify the spawning location of any mission (and whether
or not to use an alternative location if the provided location is
invalid). This will allow for easy integration of DMS into admin tools.
* Added support for scripts to be executed on mission completion or
mission failure (this will allow you to have "multi-part" missions,
where you would simply spawn the next part of the mission if the
previous is completed).
* Restructured DMS_DEBUG from the previous patch in favor of a more
"optimized" method.
* DMS_fnc_findSafePos is completely overhauled; DMS no longer uses
"BIS_fnc_findSafePos". It also now throttles minSurfaceNormal on
repeated failure. You can now determine whether or not the mission
should spawn on water (however, I don't suggest you use this function
for water spawns yet).
* You can also now define a minimum distance from other territories for
missions.
* DMS_fnc_IsValidPosition will now check for water depth if the provided
position is meant to be checked as a "water spawn". It will now also
check for nearby missions from A3XAI or VEMF (untested).
* DMS_fnc_IsValidPosition now checks whether or not the position is
outside of the map borders.
* DMS_fnc_SelectOffsetPos will now return the 3rd element of the
provided position as-is.
* You can now have multiple AI within a group with a launcher.
* AI now have a 5-second godmode after spawning.
* You can now spawn a crate using ASL pos. DMS_fnc_SpawnCrate will also
make sure that the provided classname is valid.
* Just like SpawnCrate, "DMS_fnc_SpawnNonPersistentVehicle" and
"DMS_fnc_SpawnPersistentVehicle" will now make sure that the provided
classname is valid.
* "DMS_fnc_SpawnPersistentVehicle" now supports ASL spawning.
* Added support for [Rod Serling's](https://github.com/Rod-Serling) AVS.
* General optimization.
2015-10-17 19:39:07 +00:00
_minSurfaceNormal, // NUMBER (between 0-1): Maximum "surfaceNormal"; Basically determines how steep a position is. Check the comment for config value "DMS_MinSurfaceNormal" in config.sqf for more info
2015-10-04 03:32:42 +00:00
_spawnZoneNearLimit, // NUMBER (distance): Minimum distance from a spawn point.
_traderZoneNearLimit, // NUMBER (distance): Minimum distance from a trader zone.
_missionNearLimit, // NUMBER (distance): Minimum distance from another mission.
_playerNearLimit, // NUMBER (distance): Minimum distance from a player.
_throttleParams // BOOLEAN: Whether or not some of the distance values should be throttled on repeated attempts.
I know... it's been over a week... gimme a break
#### October 17, 2015 (2:30 PM CST-America):
* **NEW CONFIG VALUES**:
|DMS_TimeToFirstMission|
|DMS_ShowDifficultyColorLegend|
|DMS_TerritoryNearBlacklist|
|DMS_MinSurfaceNormal| (Used to be DMS_MaxSurfaceNormal, simply renamed)
|DMS_ai_launchers_per_group|
* **UPDATING ALL OF YOUR MISSION FILES IS HIGHLY RECOMMENDED UNLESS YOU
KNOW WHAT YOU'RE DOING**
* RENAMED "DMS_MaxSurfaceNormal" to "DMS_MinSurfaceNormal". I must have
been very tired when I named it...
* DMS_MinSurfaceNormal is now 0.9 by default, but will be 0.95 for Altis
and Bornholm (since they're relatively large/flat maps). Esseker is
still 0.85. If you want to convert DMS_MinSurfaceNormal to degrees, you
would take the arc-cosine of the surfaceNormal, and that will give you
the degrees from horizontal. For example, arccos(0.9) is about 25
degrees. Google: "arccos(0.9) in degrees"
* Tweaked and rebalanced "DMS_BanditMissionTypes". Most of the spawn
chances are the same, they're just reduced in order to prevent the
creation of arrays that are far larger than they need to be.
* You can now manually define how long it takes for the first mission to
spawn after a restart.
* DMS will now by default create markers on the bottom left of the map
to show which colors correspond to which difficulty. It isn't very
pretty, but it gets the point across.
* DMS will now manually calculate the center of the map and its radius,
if it isn't preconfigured by DMS.
* You can now specify the vehicles to spawn for missions: "bandits",
"cardealer", "construction", "donthasslethehoff", and "thieves".
* You can now specify the spawning location of any mission (and whether
or not to use an alternative location if the provided location is
invalid). This will allow for easy integration of DMS into admin tools.
* Added support for scripts to be executed on mission completion or
mission failure (this will allow you to have "multi-part" missions,
where you would simply spawn the next part of the mission if the
previous is completed).
* Restructured DMS_DEBUG from the previous patch in favor of a more
"optimized" method.
* DMS_fnc_findSafePos is completely overhauled; DMS no longer uses
"BIS_fnc_findSafePos". It also now throttles minSurfaceNormal on
repeated failure. You can now determine whether or not the mission
should spawn on water (however, I don't suggest you use this function
for water spawns yet).
* You can also now define a minimum distance from other territories for
missions.
* DMS_fnc_IsValidPosition will now check for water depth if the provided
position is meant to be checked as a "water spawn". It will now also
check for nearby missions from A3XAI or VEMF (untested).
* DMS_fnc_IsValidPosition now checks whether or not the position is
outside of the map borders.
* DMS_fnc_SelectOffsetPos will now return the 3rd element of the
provided position as-is.
* You can now have multiple AI within a group with a launcher.
* AI now have a 5-second godmode after spawning.
* You can now spawn a crate using ASL pos. DMS_fnc_SpawnCrate will also
make sure that the provided classname is valid.
* Just like SpawnCrate, "DMS_fnc_SpawnNonPersistentVehicle" and
"DMS_fnc_SpawnPersistentVehicle" will now make sure that the provided
classname is valid.
* "DMS_fnc_SpawnPersistentVehicle" now supports ASL spawning.
* Added support for [Rod Serling's](https://github.com/Rod-Serling) AVS.
* General optimization.
2015-10-17 19:39:07 +00:00
_waterSpawn // (OPTIONAL) BOOLEAN: Whether or not the mission is supposed to spawn on water. Default: false
2015-09-05 03:40:00 +00:00
] call DMS_fnc_findSafePos;
2015-08-28 21:52:56 +00:00
*/
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
private ["_nearestObjectMinDistance", "_waterNearLimit", "_minSurfaceNormal", "_spawnZoneNearLimit", "_traderZoneNearLimit", "_missionNearLimit", "_playerNearLimit", "_territoryNearLimit", "_throttleParams", "_waterSpawn", "_isValidSpot", "_attempts", "_pos", "_restriction", "_generatePos", "_presetLocs", "_presetLocsLength"];
2015-08-28 19:14:59 +00:00
2015-08-31 02:42:02 +00:00
params
[
2015-10-04 03:32:42 +00:00
["_nearestObjectMinDistance", 25, [0] ],
["_waterNearLimit", DMS_WaterNearBlacklist, [0] ],
I know... it's been over a week... gimme a break
#### October 17, 2015 (2:30 PM CST-America):
* **NEW CONFIG VALUES**:
|DMS_TimeToFirstMission|
|DMS_ShowDifficultyColorLegend|
|DMS_TerritoryNearBlacklist|
|DMS_MinSurfaceNormal| (Used to be DMS_MaxSurfaceNormal, simply renamed)
|DMS_ai_launchers_per_group|
* **UPDATING ALL OF YOUR MISSION FILES IS HIGHLY RECOMMENDED UNLESS YOU
KNOW WHAT YOU'RE DOING**
* RENAMED "DMS_MaxSurfaceNormal" to "DMS_MinSurfaceNormal". I must have
been very tired when I named it...
* DMS_MinSurfaceNormal is now 0.9 by default, but will be 0.95 for Altis
and Bornholm (since they're relatively large/flat maps). Esseker is
still 0.85. If you want to convert DMS_MinSurfaceNormal to degrees, you
would take the arc-cosine of the surfaceNormal, and that will give you
the degrees from horizontal. For example, arccos(0.9) is about 25
degrees. Google: "arccos(0.9) in degrees"
* Tweaked and rebalanced "DMS_BanditMissionTypes". Most of the spawn
chances are the same, they're just reduced in order to prevent the
creation of arrays that are far larger than they need to be.
* You can now manually define how long it takes for the first mission to
spawn after a restart.
* DMS will now by default create markers on the bottom left of the map
to show which colors correspond to which difficulty. It isn't very
pretty, but it gets the point across.
* DMS will now manually calculate the center of the map and its radius,
if it isn't preconfigured by DMS.
* You can now specify the vehicles to spawn for missions: "bandits",
"cardealer", "construction", "donthasslethehoff", and "thieves".
* You can now specify the spawning location of any mission (and whether
or not to use an alternative location if the provided location is
invalid). This will allow for easy integration of DMS into admin tools.
* Added support for scripts to be executed on mission completion or
mission failure (this will allow you to have "multi-part" missions,
where you would simply spawn the next part of the mission if the
previous is completed).
* Restructured DMS_DEBUG from the previous patch in favor of a more
"optimized" method.
* DMS_fnc_findSafePos is completely overhauled; DMS no longer uses
"BIS_fnc_findSafePos". It also now throttles minSurfaceNormal on
repeated failure. You can now determine whether or not the mission
should spawn on water (however, I don't suggest you use this function
for water spawns yet).
* You can also now define a minimum distance from other territories for
missions.
* DMS_fnc_IsValidPosition will now check for water depth if the provided
position is meant to be checked as a "water spawn". It will now also
check for nearby missions from A3XAI or VEMF (untested).
* DMS_fnc_IsValidPosition now checks whether or not the position is
outside of the map borders.
* DMS_fnc_SelectOffsetPos will now return the 3rd element of the
provided position as-is.
* You can now have multiple AI within a group with a launcher.
* AI now have a 5-second godmode after spawning.
* You can now spawn a crate using ASL pos. DMS_fnc_SpawnCrate will also
make sure that the provided classname is valid.
* Just like SpawnCrate, "DMS_fnc_SpawnNonPersistentVehicle" and
"DMS_fnc_SpawnPersistentVehicle" will now make sure that the provided
classname is valid.
* "DMS_fnc_SpawnPersistentVehicle" now supports ASL spawning.
* Added support for [Rod Serling's](https://github.com/Rod-Serling) AVS.
* General optimization.
2015-10-17 19:39:07 +00:00
["_minSurfaceNormal", DMS_MinSurfaceNormal, [0] ],
2015-10-04 03:32:42 +00:00
["_spawnZoneNearLimit", DMS_SpawnZoneNearBlacklist, [0] ],
["_traderZoneNearLimit", DMS_TraderZoneNearBlacklist,[0] ],
["_missionNearLimit", DMS_MissionNearBlacklist, [0] ],
["_playerNearLimit", DMS_PlayerNearBlacklist, [0] ],
I know... it's been over a week... gimme a break
#### October 17, 2015 (2:30 PM CST-America):
* **NEW CONFIG VALUES**:
|DMS_TimeToFirstMission|
|DMS_ShowDifficultyColorLegend|
|DMS_TerritoryNearBlacklist|
|DMS_MinSurfaceNormal| (Used to be DMS_MaxSurfaceNormal, simply renamed)
|DMS_ai_launchers_per_group|
* **UPDATING ALL OF YOUR MISSION FILES IS HIGHLY RECOMMENDED UNLESS YOU
KNOW WHAT YOU'RE DOING**
* RENAMED "DMS_MaxSurfaceNormal" to "DMS_MinSurfaceNormal". I must have
been very tired when I named it...
* DMS_MinSurfaceNormal is now 0.9 by default, but will be 0.95 for Altis
and Bornholm (since they're relatively large/flat maps). Esseker is
still 0.85. If you want to convert DMS_MinSurfaceNormal to degrees, you
would take the arc-cosine of the surfaceNormal, and that will give you
the degrees from horizontal. For example, arccos(0.9) is about 25
degrees. Google: "arccos(0.9) in degrees"
* Tweaked and rebalanced "DMS_BanditMissionTypes". Most of the spawn
chances are the same, they're just reduced in order to prevent the
creation of arrays that are far larger than they need to be.
* You can now manually define how long it takes for the first mission to
spawn after a restart.
* DMS will now by default create markers on the bottom left of the map
to show which colors correspond to which difficulty. It isn't very
pretty, but it gets the point across.
* DMS will now manually calculate the center of the map and its radius,
if it isn't preconfigured by DMS.
* You can now specify the vehicles to spawn for missions: "bandits",
"cardealer", "construction", "donthasslethehoff", and "thieves".
* You can now specify the spawning location of any mission (and whether
or not to use an alternative location if the provided location is
invalid). This will allow for easy integration of DMS into admin tools.
* Added support for scripts to be executed on mission completion or
mission failure (this will allow you to have "multi-part" missions,
where you would simply spawn the next part of the mission if the
previous is completed).
* Restructured DMS_DEBUG from the previous patch in favor of a more
"optimized" method.
* DMS_fnc_findSafePos is completely overhauled; DMS no longer uses
"BIS_fnc_findSafePos". It also now throttles minSurfaceNormal on
repeated failure. You can now determine whether or not the mission
should spawn on water (however, I don't suggest you use this function
for water spawns yet).
* You can also now define a minimum distance from other territories for
missions.
* DMS_fnc_IsValidPosition will now check for water depth if the provided
position is meant to be checked as a "water spawn". It will now also
check for nearby missions from A3XAI or VEMF (untested).
* DMS_fnc_IsValidPosition now checks whether or not the position is
outside of the map borders.
* DMS_fnc_SelectOffsetPos will now return the 3rd element of the
provided position as-is.
* You can now have multiple AI within a group with a launcher.
* AI now have a 5-second godmode after spawning.
* You can now spawn a crate using ASL pos. DMS_fnc_SpawnCrate will also
make sure that the provided classname is valid.
* Just like SpawnCrate, "DMS_fnc_SpawnNonPersistentVehicle" and
"DMS_fnc_SpawnPersistentVehicle" will now make sure that the provided
classname is valid.
* "DMS_fnc_SpawnPersistentVehicle" now supports ASL spawning.
* Added support for [Rod Serling's](https://github.com/Rod-Serling) AVS.
* General optimization.
2015-10-17 19:39:07 +00:00
["_territoryNearLimit", DMS_TerritoryNearBlacklist, [0] ],
2015-10-04 03:32:42 +00:00
["_throttleParams", DMS_ThrottleBlacklists, [true]]
2015-08-31 02:42:02 +00:00
];
2015-08-28 06:04:50 +00:00
2015-09-12 01:21:53 +00:00
I know... it's been over a week... gimme a break
#### October 17, 2015 (2:30 PM CST-America):
* **NEW CONFIG VALUES**:
|DMS_TimeToFirstMission|
|DMS_ShowDifficultyColorLegend|
|DMS_TerritoryNearBlacklist|
|DMS_MinSurfaceNormal| (Used to be DMS_MaxSurfaceNormal, simply renamed)
|DMS_ai_launchers_per_group|
* **UPDATING ALL OF YOUR MISSION FILES IS HIGHLY RECOMMENDED UNLESS YOU
KNOW WHAT YOU'RE DOING**
* RENAMED "DMS_MaxSurfaceNormal" to "DMS_MinSurfaceNormal". I must have
been very tired when I named it...
* DMS_MinSurfaceNormal is now 0.9 by default, but will be 0.95 for Altis
and Bornholm (since they're relatively large/flat maps). Esseker is
still 0.85. If you want to convert DMS_MinSurfaceNormal to degrees, you
would take the arc-cosine of the surfaceNormal, and that will give you
the degrees from horizontal. For example, arccos(0.9) is about 25
degrees. Google: "arccos(0.9) in degrees"
* Tweaked and rebalanced "DMS_BanditMissionTypes". Most of the spawn
chances are the same, they're just reduced in order to prevent the
creation of arrays that are far larger than they need to be.
* You can now manually define how long it takes for the first mission to
spawn after a restart.
* DMS will now by default create markers on the bottom left of the map
to show which colors correspond to which difficulty. It isn't very
pretty, but it gets the point across.
* DMS will now manually calculate the center of the map and its radius,
if it isn't preconfigured by DMS.
* You can now specify the vehicles to spawn for missions: "bandits",
"cardealer", "construction", "donthasslethehoff", and "thieves".
* You can now specify the spawning location of any mission (and whether
or not to use an alternative location if the provided location is
invalid). This will allow for easy integration of DMS into admin tools.
* Added support for scripts to be executed on mission completion or
mission failure (this will allow you to have "multi-part" missions,
where you would simply spawn the next part of the mission if the
previous is completed).
* Restructured DMS_DEBUG from the previous patch in favor of a more
"optimized" method.
* DMS_fnc_findSafePos is completely overhauled; DMS no longer uses
"BIS_fnc_findSafePos". It also now throttles minSurfaceNormal on
repeated failure. You can now determine whether or not the mission
should spawn on water (however, I don't suggest you use this function
for water spawns yet).
* You can also now define a minimum distance from other territories for
missions.
* DMS_fnc_IsValidPosition will now check for water depth if the provided
position is meant to be checked as a "water spawn". It will now also
check for nearby missions from A3XAI or VEMF (untested).
* DMS_fnc_IsValidPosition now checks whether or not the position is
outside of the map borders.
* DMS_fnc_SelectOffsetPos will now return the 3rd element of the
provided position as-is.
* You can now have multiple AI within a group with a launcher.
* AI now have a 5-second godmode after spawning.
* You can now spawn a crate using ASL pos. DMS_fnc_SpawnCrate will also
make sure that the provided classname is valid.
* Just like SpawnCrate, "DMS_fnc_SpawnNonPersistentVehicle" and
"DMS_fnc_SpawnPersistentVehicle" will now make sure that the provided
classname is valid.
* "DMS_fnc_SpawnPersistentVehicle" now supports ASL spawning.
* Added support for [Rod Serling's](https://github.com/Rod-Serling) AVS.
* General optimization.
2015-10-17 19:39:07 +00:00
_waterSpawn = if ((count _this)>9) then {_this select 9} else {false};
2015-10-04 03:32:42 +00:00
I know... it's been over a week... gimme a break
#### October 17, 2015 (2:30 PM CST-America):
* **NEW CONFIG VALUES**:
|DMS_TimeToFirstMission|
|DMS_ShowDifficultyColorLegend|
|DMS_TerritoryNearBlacklist|
|DMS_MinSurfaceNormal| (Used to be DMS_MaxSurfaceNormal, simply renamed)
|DMS_ai_launchers_per_group|
* **UPDATING ALL OF YOUR MISSION FILES IS HIGHLY RECOMMENDED UNLESS YOU
KNOW WHAT YOU'RE DOING**
* RENAMED "DMS_MaxSurfaceNormal" to "DMS_MinSurfaceNormal". I must have
been very tired when I named it...
* DMS_MinSurfaceNormal is now 0.9 by default, but will be 0.95 for Altis
and Bornholm (since they're relatively large/flat maps). Esseker is
still 0.85. If you want to convert DMS_MinSurfaceNormal to degrees, you
would take the arc-cosine of the surfaceNormal, and that will give you
the degrees from horizontal. For example, arccos(0.9) is about 25
degrees. Google: "arccos(0.9) in degrees"
* Tweaked and rebalanced "DMS_BanditMissionTypes". Most of the spawn
chances are the same, they're just reduced in order to prevent the
creation of arrays that are far larger than they need to be.
* You can now manually define how long it takes for the first mission to
spawn after a restart.
* DMS will now by default create markers on the bottom left of the map
to show which colors correspond to which difficulty. It isn't very
pretty, but it gets the point across.
* DMS will now manually calculate the center of the map and its radius,
if it isn't preconfigured by DMS.
* You can now specify the vehicles to spawn for missions: "bandits",
"cardealer", "construction", "donthasslethehoff", and "thieves".
* You can now specify the spawning location of any mission (and whether
or not to use an alternative location if the provided location is
invalid). This will allow for easy integration of DMS into admin tools.
* Added support for scripts to be executed on mission completion or
mission failure (this will allow you to have "multi-part" missions,
where you would simply spawn the next part of the mission if the
previous is completed).
* Restructured DMS_DEBUG from the previous patch in favor of a more
"optimized" method.
* DMS_fnc_findSafePos is completely overhauled; DMS no longer uses
"BIS_fnc_findSafePos". It also now throttles minSurfaceNormal on
repeated failure. You can now determine whether or not the mission
should spawn on water (however, I don't suggest you use this function
for water spawns yet).
* You can also now define a minimum distance from other territories for
missions.
* DMS_fnc_IsValidPosition will now check for water depth if the provided
position is meant to be checked as a "water spawn". It will now also
check for nearby missions from A3XAI or VEMF (untested).
* DMS_fnc_IsValidPosition now checks whether or not the position is
outside of the map borders.
* DMS_fnc_SelectOffsetPos will now return the 3rd element of the
provided position as-is.
* You can now have multiple AI within a group with a launcher.
* AI now have a 5-second godmode after spawning.
* You can now spawn a crate using ASL pos. DMS_fnc_SpawnCrate will also
make sure that the provided classname is valid.
* Just like SpawnCrate, "DMS_fnc_SpawnNonPersistentVehicle" and
"DMS_fnc_SpawnPersistentVehicle" will now make sure that the provided
classname is valid.
* "DMS_fnc_SpawnPersistentVehicle" now supports ASL spawning.
* Added support for [Rod Serling's](https://github.com/Rod-Serling) AVS.
* General optimization.
2015-10-17 19:39:07 +00:00
_isValidSpot = false;
_attempts = 0;
_restriction = if (_waterSpawn) then {2} else {0};
2015-08-28 06:04:50 +00:00
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
_presetLocsLength = 0;
if (DMS_UsePredefinedMissionLocations) then
{
// Shuffle the array so that the positions are selected in random order
_presetLocs = ([] + DMS_PredefinedMissionLocations) call ExileClient_util_array_shuffle;
_presetLocsLength = count _presetLocs;
};
_generatePos =
{
if (DMS_UsePredefinedMissionLocations && {_attempts<=_presetLocsLength}) then
{
_presetLocs select (_attempts - 1)
}
else
{
[DMS_MinMax_X_Coords call DMS_fnc_SelectRandomVal,DMS_MinMax_Y_Coords call DMS_fnc_SelectRandomVal] isFlatEmpty [_nearestObjectMinDistance, 0, 9999, 1, _restriction, _waterSpawn, objNull]
};
};
I know... it's been over a week... gimme a break
#### October 17, 2015 (2:30 PM CST-America):
* **NEW CONFIG VALUES**:
|DMS_TimeToFirstMission|
|DMS_ShowDifficultyColorLegend|
|DMS_TerritoryNearBlacklist|
|DMS_MinSurfaceNormal| (Used to be DMS_MaxSurfaceNormal, simply renamed)
|DMS_ai_launchers_per_group|
* **UPDATING ALL OF YOUR MISSION FILES IS HIGHLY RECOMMENDED UNLESS YOU
KNOW WHAT YOU'RE DOING**
* RENAMED "DMS_MaxSurfaceNormal" to "DMS_MinSurfaceNormal". I must have
been very tired when I named it...
* DMS_MinSurfaceNormal is now 0.9 by default, but will be 0.95 for Altis
and Bornholm (since they're relatively large/flat maps). Esseker is
still 0.85. If you want to convert DMS_MinSurfaceNormal to degrees, you
would take the arc-cosine of the surfaceNormal, and that will give you
the degrees from horizontal. For example, arccos(0.9) is about 25
degrees. Google: "arccos(0.9) in degrees"
* Tweaked and rebalanced "DMS_BanditMissionTypes". Most of the spawn
chances are the same, they're just reduced in order to prevent the
creation of arrays that are far larger than they need to be.
* You can now manually define how long it takes for the first mission to
spawn after a restart.
* DMS will now by default create markers on the bottom left of the map
to show which colors correspond to which difficulty. It isn't very
pretty, but it gets the point across.
* DMS will now manually calculate the center of the map and its radius,
if it isn't preconfigured by DMS.
* You can now specify the vehicles to spawn for missions: "bandits",
"cardealer", "construction", "donthasslethehoff", and "thieves".
* You can now specify the spawning location of any mission (and whether
or not to use an alternative location if the provided location is
invalid). This will allow for easy integration of DMS into admin tools.
* Added support for scripts to be executed on mission completion or
mission failure (this will allow you to have "multi-part" missions,
where you would simply spawn the next part of the mission if the
previous is completed).
* Restructured DMS_DEBUG from the previous patch in favor of a more
"optimized" method.
* DMS_fnc_findSafePos is completely overhauled; DMS no longer uses
"BIS_fnc_findSafePos". It also now throttles minSurfaceNormal on
repeated failure. You can now determine whether or not the mission
should spawn on water (however, I don't suggest you use this function
for water spawns yet).
* You can also now define a minimum distance from other territories for
missions.
* DMS_fnc_IsValidPosition will now check for water depth if the provided
position is meant to be checked as a "water spawn". It will now also
check for nearby missions from A3XAI or VEMF (untested).
* DMS_fnc_IsValidPosition now checks whether or not the position is
outside of the map borders.
* DMS_fnc_SelectOffsetPos will now return the 3rd element of the
provided position as-is.
* You can now have multiple AI within a group with a launcher.
* AI now have a 5-second godmode after spawning.
* You can now spawn a crate using ASL pos. DMS_fnc_SpawnCrate will also
make sure that the provided classname is valid.
* Just like SpawnCrate, "DMS_fnc_SpawnNonPersistentVehicle" and
"DMS_fnc_SpawnPersistentVehicle" will now make sure that the provided
classname is valid.
* "DMS_fnc_SpawnPersistentVehicle" now supports ASL spawning.
* Added support for [Rod Serling's](https://github.com/Rod-Serling) AVS.
* General optimization.
2015-10-17 19:39:07 +00:00
while{!_isValidSpot} do
2015-09-12 01:21:53 +00:00
{
2015-10-04 03:32:42 +00:00
_attempts = _attempts+1;
2015-09-20 20:26:08 +00:00
I know... it's been over a week... gimme a break
#### October 17, 2015 (2:30 PM CST-America):
* **NEW CONFIG VALUES**:
|DMS_TimeToFirstMission|
|DMS_ShowDifficultyColorLegend|
|DMS_TerritoryNearBlacklist|
|DMS_MinSurfaceNormal| (Used to be DMS_MaxSurfaceNormal, simply renamed)
|DMS_ai_launchers_per_group|
* **UPDATING ALL OF YOUR MISSION FILES IS HIGHLY RECOMMENDED UNLESS YOU
KNOW WHAT YOU'RE DOING**
* RENAMED "DMS_MaxSurfaceNormal" to "DMS_MinSurfaceNormal". I must have
been very tired when I named it...
* DMS_MinSurfaceNormal is now 0.9 by default, but will be 0.95 for Altis
and Bornholm (since they're relatively large/flat maps). Esseker is
still 0.85. If you want to convert DMS_MinSurfaceNormal to degrees, you
would take the arc-cosine of the surfaceNormal, and that will give you
the degrees from horizontal. For example, arccos(0.9) is about 25
degrees. Google: "arccos(0.9) in degrees"
* Tweaked and rebalanced "DMS_BanditMissionTypes". Most of the spawn
chances are the same, they're just reduced in order to prevent the
creation of arrays that are far larger than they need to be.
* You can now manually define how long it takes for the first mission to
spawn after a restart.
* DMS will now by default create markers on the bottom left of the map
to show which colors correspond to which difficulty. It isn't very
pretty, but it gets the point across.
* DMS will now manually calculate the center of the map and its radius,
if it isn't preconfigured by DMS.
* You can now specify the vehicles to spawn for missions: "bandits",
"cardealer", "construction", "donthasslethehoff", and "thieves".
* You can now specify the spawning location of any mission (and whether
or not to use an alternative location if the provided location is
invalid). This will allow for easy integration of DMS into admin tools.
* Added support for scripts to be executed on mission completion or
mission failure (this will allow you to have "multi-part" missions,
where you would simply spawn the next part of the mission if the
previous is completed).
* Restructured DMS_DEBUG from the previous patch in favor of a more
"optimized" method.
* DMS_fnc_findSafePos is completely overhauled; DMS no longer uses
"BIS_fnc_findSafePos". It also now throttles minSurfaceNormal on
repeated failure. You can now determine whether or not the mission
should spawn on water (however, I don't suggest you use this function
for water spawns yet).
* You can also now define a minimum distance from other territories for
missions.
* DMS_fnc_IsValidPosition will now check for water depth if the provided
position is meant to be checked as a "water spawn". It will now also
check for nearby missions from A3XAI or VEMF (untested).
* DMS_fnc_IsValidPosition now checks whether or not the position is
outside of the map borders.
* DMS_fnc_SelectOffsetPos will now return the 3rd element of the
provided position as-is.
* You can now have multiple AI within a group with a launcher.
* AI now have a 5-second godmode after spawning.
* You can now spawn a crate using ASL pos. DMS_fnc_SpawnCrate will also
make sure that the provided classname is valid.
* Just like SpawnCrate, "DMS_fnc_SpawnNonPersistentVehicle" and
"DMS_fnc_SpawnPersistentVehicle" will now make sure that the provided
classname is valid.
* "DMS_fnc_SpawnPersistentVehicle" now supports ASL spawning.
* Added support for [Rod Serling's](https://github.com/Rod-Serling) AVS.
* General optimization.
2015-10-17 19:39:07 +00:00
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
_pos = [];
I know... it's been over a week... gimme a break
#### October 17, 2015 (2:30 PM CST-America):
* **NEW CONFIG VALUES**:
|DMS_TimeToFirstMission|
|DMS_ShowDifficultyColorLegend|
|DMS_TerritoryNearBlacklist|
|DMS_MinSurfaceNormal| (Used to be DMS_MaxSurfaceNormal, simply renamed)
|DMS_ai_launchers_per_group|
* **UPDATING ALL OF YOUR MISSION FILES IS HIGHLY RECOMMENDED UNLESS YOU
KNOW WHAT YOU'RE DOING**
* RENAMED "DMS_MaxSurfaceNormal" to "DMS_MinSurfaceNormal". I must have
been very tired when I named it...
* DMS_MinSurfaceNormal is now 0.9 by default, but will be 0.95 for Altis
and Bornholm (since they're relatively large/flat maps). Esseker is
still 0.85. If you want to convert DMS_MinSurfaceNormal to degrees, you
would take the arc-cosine of the surfaceNormal, and that will give you
the degrees from horizontal. For example, arccos(0.9) is about 25
degrees. Google: "arccos(0.9) in degrees"
* Tweaked and rebalanced "DMS_BanditMissionTypes". Most of the spawn
chances are the same, they're just reduced in order to prevent the
creation of arrays that are far larger than they need to be.
* You can now manually define how long it takes for the first mission to
spawn after a restart.
* DMS will now by default create markers on the bottom left of the map
to show which colors correspond to which difficulty. It isn't very
pretty, but it gets the point across.
* DMS will now manually calculate the center of the map and its radius,
if it isn't preconfigured by DMS.
* You can now specify the vehicles to spawn for missions: "bandits",
"cardealer", "construction", "donthasslethehoff", and "thieves".
* You can now specify the spawning location of any mission (and whether
or not to use an alternative location if the provided location is
invalid). This will allow for easy integration of DMS into admin tools.
* Added support for scripts to be executed on mission completion or
mission failure (this will allow you to have "multi-part" missions,
where you would simply spawn the next part of the mission if the
previous is completed).
* Restructured DMS_DEBUG from the previous patch in favor of a more
"optimized" method.
* DMS_fnc_findSafePos is completely overhauled; DMS no longer uses
"BIS_fnc_findSafePos". It also now throttles minSurfaceNormal on
repeated failure. You can now determine whether or not the mission
should spawn on water (however, I don't suggest you use this function
for water spawns yet).
* You can also now define a minimum distance from other territories for
missions.
* DMS_fnc_IsValidPosition will now check for water depth if the provided
position is meant to be checked as a "water spawn". It will now also
check for nearby missions from A3XAI or VEMF (untested).
* DMS_fnc_IsValidPosition now checks whether or not the position is
outside of the map borders.
* DMS_fnc_SelectOffsetPos will now return the 3rd element of the
provided position as-is.
* You can now have multiple AI within a group with a launcher.
* AI now have a 5-second godmode after spawning.
* You can now spawn a crate using ASL pos. DMS_fnc_SpawnCrate will also
make sure that the provided classname is valid.
* Just like SpawnCrate, "DMS_fnc_SpawnNonPersistentVehicle" and
"DMS_fnc_SpawnPersistentVehicle" will now make sure that the provided
classname is valid.
* "DMS_fnc_SpawnPersistentVehicle" now supports ASL spawning.
* Added support for [Rod Serling's](https://github.com/Rod-Serling) AVS.
* General optimization.
2015-10-17 19:39:07 +00:00
while {_pos isEqualTo []} do
{
Static Missions! And MORE!
* ** NEW CONFIG VALUES:
|DMS_MaxStaticMissions|
|DMS_TimeToFirstStaticMission|
|DMS_TimeBetweenStaticMissions|
|DMS_StaticMissionTimeOut|
|DMS_StaticMissionTimeoutResetRange|
|DMS_StaticMinPlayerDistance|
|DMS_UsePredefinedMissionLocations|
|DMS_PredefinedMissionLocations|
|DMS_MinDistFromWestBorder|
|DMS_MinDistFromEastBorder|
|DMS_MinDistFromSouthBorder|
|DMS_MinDistFromNorthBorder|
|DMS_StaticMissionTypes|
**
* Added new value "DMS_Version".
* ** "DMS_fnc_SpawnAIStatic" is now "DMS_fnc_SpawnAIStaticMG";
donthasslethehoff, mercbase, and testmission have been updated with the
new names**
* DMS will now check to make sure that marker colors passed to
fn_CreateMarker are valid marker colors.
* You can now control how far away from each border a mission will spawn
(each border is separate: west, east, south, north). All "supported"
maps have config values adjusted in "map_configs".
* New salt flats base by [Darth Rogue from
SOA](http://soldiersofanarchy.net/).
* **IMPLEMENTED STATIC MISSIONS (initial version). "saltflats" is
currently the only static mission for Altis ONLY. However, it shouldn't
be too difficult to export it to other maps (once positions have been
adjusted). **
* Fixed a couple of outdated/inaccurate function documentation comments.
* **FINALLY REMOVED THE Default Value "-1" PARAMS RPT SPAM. I FOUND IT.
YESSSSS**
* Fixed fn_CleanUp producing debug logs even with debug disabled.
* Fixed the CleanUp list not Cleaning Up after itself (hah!).
* Added diag_tickTime and DMS_Version to debug logs.
* You can now define a custom function for DMS_FillCrate. It will be
passed params from _lootValues select 0. ** I haven't tested this at
all. Just keep that in mind ;) **
* You can now manually define mission spawning locations into an array,
and that array will be used to find a location. Each location will still
be checked for validity, and if no valid positions are found from the
list, a random one is then generated using the normal method. ** I
didn't test this part at all either :P **
* fn_FindSafePos should be even more efficient now, and even more
controllable.
* Quite a few new functions; most notably: fn_GroupReinforcementsManager
* fn_GroupReinforcementsManager is used by static missions to provide
reinforcements for AI once they fall below a certain threshold (and/or
any other parameters you provide). Make sure to check out the function
documentation and give any suggestions for new reinforcement types!
* New function "DMS_fnc_ImportFromM3E_Static" will simply import a base
from the provided file (under static). No conversion to relative
position or anything. Simply spawning, positioning, and disabling
simulation.
* Removed the check for being outside map edges from fn_isValidPosition.
* "hardcore" AI will now be even more difficult ;)
2015-10-31 02:18:58 +00:00
_pos = call _generatePos;
I know... it's been over a week... gimme a break
#### October 17, 2015 (2:30 PM CST-America):
* **NEW CONFIG VALUES**:
|DMS_TimeToFirstMission|
|DMS_ShowDifficultyColorLegend|
|DMS_TerritoryNearBlacklist|
|DMS_MinSurfaceNormal| (Used to be DMS_MaxSurfaceNormal, simply renamed)
|DMS_ai_launchers_per_group|
* **UPDATING ALL OF YOUR MISSION FILES IS HIGHLY RECOMMENDED UNLESS YOU
KNOW WHAT YOU'RE DOING**
* RENAMED "DMS_MaxSurfaceNormal" to "DMS_MinSurfaceNormal". I must have
been very tired when I named it...
* DMS_MinSurfaceNormal is now 0.9 by default, but will be 0.95 for Altis
and Bornholm (since they're relatively large/flat maps). Esseker is
still 0.85. If you want to convert DMS_MinSurfaceNormal to degrees, you
would take the arc-cosine of the surfaceNormal, and that will give you
the degrees from horizontal. For example, arccos(0.9) is about 25
degrees. Google: "arccos(0.9) in degrees"
* Tweaked and rebalanced "DMS_BanditMissionTypes". Most of the spawn
chances are the same, they're just reduced in order to prevent the
creation of arrays that are far larger than they need to be.
* You can now manually define how long it takes for the first mission to
spawn after a restart.
* DMS will now by default create markers on the bottom left of the map
to show which colors correspond to which difficulty. It isn't very
pretty, but it gets the point across.
* DMS will now manually calculate the center of the map and its radius,
if it isn't preconfigured by DMS.
* You can now specify the vehicles to spawn for missions: "bandits",
"cardealer", "construction", "donthasslethehoff", and "thieves".
* You can now specify the spawning location of any mission (and whether
or not to use an alternative location if the provided location is
invalid). This will allow for easy integration of DMS into admin tools.
* Added support for scripts to be executed on mission completion or
mission failure (this will allow you to have "multi-part" missions,
where you would simply spawn the next part of the mission if the
previous is completed).
* Restructured DMS_DEBUG from the previous patch in favor of a more
"optimized" method.
* DMS_fnc_findSafePos is completely overhauled; DMS no longer uses
"BIS_fnc_findSafePos". It also now throttles minSurfaceNormal on
repeated failure. You can now determine whether or not the mission
should spawn on water (however, I don't suggest you use this function
for water spawns yet).
* You can also now define a minimum distance from other territories for
missions.
* DMS_fnc_IsValidPosition will now check for water depth if the provided
position is meant to be checked as a "water spawn". It will now also
check for nearby missions from A3XAI or VEMF (untested).
* DMS_fnc_IsValidPosition now checks whether or not the position is
outside of the map borders.
* DMS_fnc_SelectOffsetPos will now return the 3rd element of the
provided position as-is.
* You can now have multiple AI within a group with a launcher.
* AI now have a 5-second godmode after spawning.
* You can now spawn a crate using ASL pos. DMS_fnc_SpawnCrate will also
make sure that the provided classname is valid.
* Just like SpawnCrate, "DMS_fnc_SpawnNonPersistentVehicle" and
"DMS_fnc_SpawnPersistentVehicle" will now make sure that the provided
classname is valid.
* "DMS_fnc_SpawnPersistentVehicle" now supports ASL spawning.
* Added support for [Rod Serling's](https://github.com/Rod-Serling) AVS.
* General optimization.
2015-10-17 19:39:07 +00:00
};
2015-10-04 03:32:42 +00:00
// It will only throttle the missionNear blacklist and playerNear limits because those are the most likely to throw an exception.
// The throttling works by decreasing the parameters by 10% every 15 attempts, until it reaches 100 meters (by default).
if (_throttleParams && {(_attempts>=DMS_AttemptsUntilThrottle) && {(_attempts%DMS_AttemptsUntilThrottle)==0}}) then
2015-08-28 19:14:59 +00:00
{
2015-10-04 03:32:42 +00:00
_missionNearLimit = (DMS_ThrottleCoefficient * _missionNearLimit) max DMS_MinThrottledDistance;
_playerNearLimit = (DMS_ThrottleCoefficient * _playerNearLimit) max DMS_MinThrottledDistance;
I know... it's been over a week... gimme a break
#### October 17, 2015 (2:30 PM CST-America):
* **NEW CONFIG VALUES**:
|DMS_TimeToFirstMission|
|DMS_ShowDifficultyColorLegend|
|DMS_TerritoryNearBlacklist|
|DMS_MinSurfaceNormal| (Used to be DMS_MaxSurfaceNormal, simply renamed)
|DMS_ai_launchers_per_group|
* **UPDATING ALL OF YOUR MISSION FILES IS HIGHLY RECOMMENDED UNLESS YOU
KNOW WHAT YOU'RE DOING**
* RENAMED "DMS_MaxSurfaceNormal" to "DMS_MinSurfaceNormal". I must have
been very tired when I named it...
* DMS_MinSurfaceNormal is now 0.9 by default, but will be 0.95 for Altis
and Bornholm (since they're relatively large/flat maps). Esseker is
still 0.85. If you want to convert DMS_MinSurfaceNormal to degrees, you
would take the arc-cosine of the surfaceNormal, and that will give you
the degrees from horizontal. For example, arccos(0.9) is about 25
degrees. Google: "arccos(0.9) in degrees"
* Tweaked and rebalanced "DMS_BanditMissionTypes". Most of the spawn
chances are the same, they're just reduced in order to prevent the
creation of arrays that are far larger than they need to be.
* You can now manually define how long it takes for the first mission to
spawn after a restart.
* DMS will now by default create markers on the bottom left of the map
to show which colors correspond to which difficulty. It isn't very
pretty, but it gets the point across.
* DMS will now manually calculate the center of the map and its radius,
if it isn't preconfigured by DMS.
* You can now specify the vehicles to spawn for missions: "bandits",
"cardealer", "construction", "donthasslethehoff", and "thieves".
* You can now specify the spawning location of any mission (and whether
or not to use an alternative location if the provided location is
invalid). This will allow for easy integration of DMS into admin tools.
* Added support for scripts to be executed on mission completion or
mission failure (this will allow you to have "multi-part" missions,
where you would simply spawn the next part of the mission if the
previous is completed).
* Restructured DMS_DEBUG from the previous patch in favor of a more
"optimized" method.
* DMS_fnc_findSafePos is completely overhauled; DMS no longer uses
"BIS_fnc_findSafePos". It also now throttles minSurfaceNormal on
repeated failure. You can now determine whether or not the mission
should spawn on water (however, I don't suggest you use this function
for water spawns yet).
* You can also now define a minimum distance from other territories for
missions.
* DMS_fnc_IsValidPosition will now check for water depth if the provided
position is meant to be checked as a "water spawn". It will now also
check for nearby missions from A3XAI or VEMF (untested).
* DMS_fnc_IsValidPosition now checks whether or not the position is
outside of the map borders.
* DMS_fnc_SelectOffsetPos will now return the 3rd element of the
provided position as-is.
* You can now have multiple AI within a group with a launcher.
* AI now have a 5-second godmode after spawning.
* You can now spawn a crate using ASL pos. DMS_fnc_SpawnCrate will also
make sure that the provided classname is valid.
* Just like SpawnCrate, "DMS_fnc_SpawnNonPersistentVehicle" and
"DMS_fnc_SpawnPersistentVehicle" will now make sure that the provided
classname is valid.
* "DMS_fnc_SpawnPersistentVehicle" now supports ASL spawning.
* Added support for [Rod Serling's](https://github.com/Rod-Serling) AVS.
* General optimization.
2015-10-17 19:39:07 +00:00
// SurfaceNormal is a bit more tricky than distances, so it's throttled differently. To convert from degrees to surfaceNormal, you take the cosine of the degrees from horizontal. Take the arc-cosine to convert surfaceNormal to degrees: arccos(0.8) in degrees ~= 37
_minSurfaceNormal = (_minSurfaceNormal - 0.005) max 0.8;
if (DMS_DEBUG) then
{
(format ["FindSafePos :: Throttling _missionNearLimit to %1 and _playerNearLimit to %2 and _minSurfaceNormal to %4 after %3 failed attempts to find a safe position!",_missionNearLimit,_playerNearLimit,_attempts,_minSurfaceNormal]) call DMS_fnc_DebugLog;
};
2015-08-28 06:04:50 +00:00
};
2015-10-04 03:32:42 +00:00
I know... it's been over a week... gimme a break
#### October 17, 2015 (2:30 PM CST-America):
* **NEW CONFIG VALUES**:
|DMS_TimeToFirstMission|
|DMS_ShowDifficultyColorLegend|
|DMS_TerritoryNearBlacklist|
|DMS_MinSurfaceNormal| (Used to be DMS_MaxSurfaceNormal, simply renamed)
|DMS_ai_launchers_per_group|
* **UPDATING ALL OF YOUR MISSION FILES IS HIGHLY RECOMMENDED UNLESS YOU
KNOW WHAT YOU'RE DOING**
* RENAMED "DMS_MaxSurfaceNormal" to "DMS_MinSurfaceNormal". I must have
been very tired when I named it...
* DMS_MinSurfaceNormal is now 0.9 by default, but will be 0.95 for Altis
and Bornholm (since they're relatively large/flat maps). Esseker is
still 0.85. If you want to convert DMS_MinSurfaceNormal to degrees, you
would take the arc-cosine of the surfaceNormal, and that will give you
the degrees from horizontal. For example, arccos(0.9) is about 25
degrees. Google: "arccos(0.9) in degrees"
* Tweaked and rebalanced "DMS_BanditMissionTypes". Most of the spawn
chances are the same, they're just reduced in order to prevent the
creation of arrays that are far larger than they need to be.
* You can now manually define how long it takes for the first mission to
spawn after a restart.
* DMS will now by default create markers on the bottom left of the map
to show which colors correspond to which difficulty. It isn't very
pretty, but it gets the point across.
* DMS will now manually calculate the center of the map and its radius,
if it isn't preconfigured by DMS.
* You can now specify the vehicles to spawn for missions: "bandits",
"cardealer", "construction", "donthasslethehoff", and "thieves".
* You can now specify the spawning location of any mission (and whether
or not to use an alternative location if the provided location is
invalid). This will allow for easy integration of DMS into admin tools.
* Added support for scripts to be executed on mission completion or
mission failure (this will allow you to have "multi-part" missions,
where you would simply spawn the next part of the mission if the
previous is completed).
* Restructured DMS_DEBUG from the previous patch in favor of a more
"optimized" method.
* DMS_fnc_findSafePos is completely overhauled; DMS no longer uses
"BIS_fnc_findSafePos". It also now throttles minSurfaceNormal on
repeated failure. You can now determine whether or not the mission
should spawn on water (however, I don't suggest you use this function
for water spawns yet).
* You can also now define a minimum distance from other territories for
missions.
* DMS_fnc_IsValidPosition will now check for water depth if the provided
position is meant to be checked as a "water spawn". It will now also
check for nearby missions from A3XAI or VEMF (untested).
* DMS_fnc_IsValidPosition now checks whether or not the position is
outside of the map borders.
* DMS_fnc_SelectOffsetPos will now return the 3rd element of the
provided position as-is.
* You can now have multiple AI within a group with a launcher.
* AI now have a 5-second godmode after spawning.
* You can now spawn a crate using ASL pos. DMS_fnc_SpawnCrate will also
make sure that the provided classname is valid.
* Just like SpawnCrate, "DMS_fnc_SpawnNonPersistentVehicle" and
"DMS_fnc_SpawnPersistentVehicle" will now make sure that the provided
classname is valid.
* "DMS_fnc_SpawnPersistentVehicle" now supports ASL spawning.
* Added support for [Rod Serling's](https://github.com/Rod-Serling) AVS.
* General optimization.
2015-10-17 19:39:07 +00:00
_isValidSpot = [_pos, _waterNearLimit, _minSurfaceNormal, _spawnZoneNearLimit, _traderZoneNearLimit, _missionNearLimit, _playerNearLimit, _territoryNearLimit, _waterSpawn] call DMS_fnc_IsValidPosition;
2015-08-28 06:04:50 +00:00
};
2015-10-04 03:32:42 +00:00
I know... it's been over a week... gimme a break
#### October 17, 2015 (2:30 PM CST-America):
* **NEW CONFIG VALUES**:
|DMS_TimeToFirstMission|
|DMS_ShowDifficultyColorLegend|
|DMS_TerritoryNearBlacklist|
|DMS_MinSurfaceNormal| (Used to be DMS_MaxSurfaceNormal, simply renamed)
|DMS_ai_launchers_per_group|
* **UPDATING ALL OF YOUR MISSION FILES IS HIGHLY RECOMMENDED UNLESS YOU
KNOW WHAT YOU'RE DOING**
* RENAMED "DMS_MaxSurfaceNormal" to "DMS_MinSurfaceNormal". I must have
been very tired when I named it...
* DMS_MinSurfaceNormal is now 0.9 by default, but will be 0.95 for Altis
and Bornholm (since they're relatively large/flat maps). Esseker is
still 0.85. If you want to convert DMS_MinSurfaceNormal to degrees, you
would take the arc-cosine of the surfaceNormal, and that will give you
the degrees from horizontal. For example, arccos(0.9) is about 25
degrees. Google: "arccos(0.9) in degrees"
* Tweaked and rebalanced "DMS_BanditMissionTypes". Most of the spawn
chances are the same, they're just reduced in order to prevent the
creation of arrays that are far larger than they need to be.
* You can now manually define how long it takes for the first mission to
spawn after a restart.
* DMS will now by default create markers on the bottom left of the map
to show which colors correspond to which difficulty. It isn't very
pretty, but it gets the point across.
* DMS will now manually calculate the center of the map and its radius,
if it isn't preconfigured by DMS.
* You can now specify the vehicles to spawn for missions: "bandits",
"cardealer", "construction", "donthasslethehoff", and "thieves".
* You can now specify the spawning location of any mission (and whether
or not to use an alternative location if the provided location is
invalid). This will allow for easy integration of DMS into admin tools.
* Added support for scripts to be executed on mission completion or
mission failure (this will allow you to have "multi-part" missions,
where you would simply spawn the next part of the mission if the
previous is completed).
* Restructured DMS_DEBUG from the previous patch in favor of a more
"optimized" method.
* DMS_fnc_findSafePos is completely overhauled; DMS no longer uses
"BIS_fnc_findSafePos". It also now throttles minSurfaceNormal on
repeated failure. You can now determine whether or not the mission
should spawn on water (however, I don't suggest you use this function
for water spawns yet).
* You can also now define a minimum distance from other territories for
missions.
* DMS_fnc_IsValidPosition will now check for water depth if the provided
position is meant to be checked as a "water spawn". It will now also
check for nearby missions from A3XAI or VEMF (untested).
* DMS_fnc_IsValidPosition now checks whether or not the position is
outside of the map borders.
* DMS_fnc_SelectOffsetPos will now return the 3rd element of the
provided position as-is.
* You can now have multiple AI within a group with a launcher.
* AI now have a 5-second godmode after spawning.
* You can now spawn a crate using ASL pos. DMS_fnc_SpawnCrate will also
make sure that the provided classname is valid.
* Just like SpawnCrate, "DMS_fnc_SpawnNonPersistentVehicle" and
"DMS_fnc_SpawnPersistentVehicle" will now make sure that the provided
classname is valid.
* "DMS_fnc_SpawnPersistentVehicle" now supports ASL spawning.
* Added support for [Rod Serling's](https://github.com/Rod-Serling) AVS.
* General optimization.
2015-10-17 19:39:07 +00:00
_pos set [2,0];
2015-10-04 03:32:42 +00:00
I know... it's been over a week... gimme a break
#### October 17, 2015 (2:30 PM CST-America):
* **NEW CONFIG VALUES**:
|DMS_TimeToFirstMission|
|DMS_ShowDifficultyColorLegend|
|DMS_TerritoryNearBlacklist|
|DMS_MinSurfaceNormal| (Used to be DMS_MaxSurfaceNormal, simply renamed)
|DMS_ai_launchers_per_group|
* **UPDATING ALL OF YOUR MISSION FILES IS HIGHLY RECOMMENDED UNLESS YOU
KNOW WHAT YOU'RE DOING**
* RENAMED "DMS_MaxSurfaceNormal" to "DMS_MinSurfaceNormal". I must have
been very tired when I named it...
* DMS_MinSurfaceNormal is now 0.9 by default, but will be 0.95 for Altis
and Bornholm (since they're relatively large/flat maps). Esseker is
still 0.85. If you want to convert DMS_MinSurfaceNormal to degrees, you
would take the arc-cosine of the surfaceNormal, and that will give you
the degrees from horizontal. For example, arccos(0.9) is about 25
degrees. Google: "arccos(0.9) in degrees"
* Tweaked and rebalanced "DMS_BanditMissionTypes". Most of the spawn
chances are the same, they're just reduced in order to prevent the
creation of arrays that are far larger than they need to be.
* You can now manually define how long it takes for the first mission to
spawn after a restart.
* DMS will now by default create markers on the bottom left of the map
to show which colors correspond to which difficulty. It isn't very
pretty, but it gets the point across.
* DMS will now manually calculate the center of the map and its radius,
if it isn't preconfigured by DMS.
* You can now specify the vehicles to spawn for missions: "bandits",
"cardealer", "construction", "donthasslethehoff", and "thieves".
* You can now specify the spawning location of any mission (and whether
or not to use an alternative location if the provided location is
invalid). This will allow for easy integration of DMS into admin tools.
* Added support for scripts to be executed on mission completion or
mission failure (this will allow you to have "multi-part" missions,
where you would simply spawn the next part of the mission if the
previous is completed).
* Restructured DMS_DEBUG from the previous patch in favor of a more
"optimized" method.
* DMS_fnc_findSafePos is completely overhauled; DMS no longer uses
"BIS_fnc_findSafePos". It also now throttles minSurfaceNormal on
repeated failure. You can now determine whether or not the mission
should spawn on water (however, I don't suggest you use this function
for water spawns yet).
* You can also now define a minimum distance from other territories for
missions.
* DMS_fnc_IsValidPosition will now check for water depth if the provided
position is meant to be checked as a "water spawn". It will now also
check for nearby missions from A3XAI or VEMF (untested).
* DMS_fnc_IsValidPosition now checks whether or not the position is
outside of the map borders.
* DMS_fnc_SelectOffsetPos will now return the 3rd element of the
provided position as-is.
* You can now have multiple AI within a group with a launcher.
* AI now have a 5-second godmode after spawning.
* You can now spawn a crate using ASL pos. DMS_fnc_SpawnCrate will also
make sure that the provided classname is valid.
* Just like SpawnCrate, "DMS_fnc_SpawnNonPersistentVehicle" and
"DMS_fnc_SpawnPersistentVehicle" will now make sure that the provided
classname is valid.
* "DMS_fnc_SpawnPersistentVehicle" now supports ASL spawning.
* Added support for [Rod Serling's](https://github.com/Rod-Serling) AVS.
* General optimization.
2015-10-17 19:39:07 +00:00
if (DMS_DEBUG) then
{
(format["FindSafePos :: Found mission position %1 in %2 attempts. _this: %3",_pos,_attempts,_this]) call DMS_fnc_DebugLog;
};
2015-10-04 03:32:42 +00:00
2015-08-28 19:14:59 +00:00
_pos;
