cc-mek-scada/reactor-plc/config/check.lua

local comms      = require("scada-common.comms")
local network    = require("scada-common.network")
local ppm        = require("scada-common.ppm")
local tcd        = require("scada-common.tcd")
local util       = require("scada-common.util")

local plc        = require("reactor-plc.plc")

local core       = require("graphics.core")

local Div        = require("graphics.elements.div")
local ListBox    = require("graphics.elements.listbox")
local TextBox    = require("graphics.elements.textbox")

local PushButton = require("graphics.elements.controls.push_button")

local tri = util.trinary

local cpair = core.cpair

local PROTOCOL = comms.PROTOCOL
local DEVICE_TYPE = comms.DEVICE_TYPE
local ESTABLISH_ACK = comms.ESTABLISH_ACK
local MGMT_TYPE = comms.MGMT_TYPE

local self = {
    nic = nil,           ---@type nic
    net_listen = false,
    sv_addr = comms.BROADCAST,
    sv_seq_num = util.time_ms() * 10,

    self_check_pass = true,

    settings = nil,      ---@type plc_config

    run_test_btn = nil,  ---@type graphics_element
    self_check_msg = nil ---@type function
}

-- send a management packet to the supervisor
---@param msg_type MGMT_TYPE
---@param msg table
local function send_sv(msg_type, msg)
    local s_pkt = comms.scada_packet()
    local pkt = comms.mgmt_packet()

    pkt.make(msg_type, msg)
    s_pkt.make(self.sv_addr, self.sv_seq_num, PROTOCOL.SCADA_MGMT, pkt.raw_sendable())

    self.nic.transmit(self.settings.SVR_Channel, self.settings.PLC_Channel, s_pkt)
    self.sv_seq_num = self.sv_seq_num + 1
end

-- handle an establish message from the supervisor
---@param packet mgmt_frame
local function handle_packet(packet)
    local error_msg = nil

    if packet.scada_frame.local_channel() ~= self.settings.PLC_Channel then
        error_msg = "error: unknown receive channel"
    elseif packet.scada_frame.remote_channel() == self.settings.SVR_Channel and packet.scada_frame.protocol() == PROTOCOL.SCADA_MGMT then
        if packet.type == MGMT_TYPE.ESTABLISH then
            if packet.length == 1 then
                local est_ack = packet.data[1]

                if est_ack== ESTABLISH_ACK.ALLOW then
                    self.self_check_msg(nil, true, "")
                    self.sv_addr = packet.scada_frame.src_addr()
                    send_sv(MGMT_TYPE.CLOSE, {})
                elseif est_ack == ESTABLISH_ACK.DENY then
                    error_msg = "error: supervisor connection denied"
                elseif est_ack == ESTABLISH_ACK.COLLISION then
                    error_msg = "another reactor PLC is connected with this reactor unit ID"
                elseif est_ack == ESTABLISH_ACK.BAD_VERSION then
                    error_msg = "reactor PLC comms version does not match supervisor comms version, make sure both devices are up-to-date (ccmsi update ...)"
                else
                    error_msg = "error: invalid reply from supervisor"
                end
            else
                error_msg = "error: invalid reply length from supervisor"
            end
        else
            error_msg = "error: didn't get an establish reply from supervisor"
        end
    end

    self.net_listen = false
    self.run_test_btn.enable()

    if error_msg then
        self.self_check_msg(nil, false, error_msg)
    end
end

-- handle supervisor connection failure
local function handle_timeout()
    self.net_listen = false
    self.run_test_btn.enable()
    self.self_check_msg(nil, false, "make sure your supervisor is running, your channels are correct, trusted ranges are set properly (if enabled), facility keys match (if set), and if you are using wireless modems rather than ender modems, that your devices are close together in the same dimension")
end

-- execute the self-check
---@param sc_log graphics_element
local function self_check(sc_log)
    self.run_test_btn.disable()

    sc_log.remove_all()
    ppm.mount_all()

    self.self_check_pass = true

    local modem = ppm.get_wireless_modem()
    local reactor = ppm.get_fission_reactor()
    local valid_cfg = plc.validate_config(self.settings)

    self.self_check_msg("> check wireless/ender modem connected...", modem ~= nil, "you must connect an ender or wireless modem to the reactor PLC")
    self.self_check_msg("> check fission reactor connected...", reactor ~= nil, "please connect the reactor PLC to the reactor's fission reactor logic adapter")
    self.self_check_msg("> check fission reactor formed...")
    -- this consumes events, but that is fine here
    self.self_check_msg(nil, reactor and reactor.isFormed(), "ensure the fission reactor multiblock is formed")

    self.self_check_msg("> check configuration...", valid_cfg, "go through Configure System again and apply settings to repair any corrupted or missing settings")

    if valid_cfg and modem then
        self.self_check_msg("> check supervisor connection...")

        -- init mac as needed
        if self.settings.AuthKey and string.len(self.settings.AuthKey) >= 8 then
            network.init_mac(self.settings.AuthKey)
        else
            network.deinit_mac()
        end

        self.nic = network.nic(modem)

        self.nic.closeAll()
        self.nic.open(self.settings.PLC_Channel)

        self.sv_addr = comms.BROADCAST
        self.net_listen = true

        send_sv(MGMT_TYPE.ESTABLISH, { comms.version, "0.0.0", DEVICE_TYPE.PLC, self.settings.UnitID })

        tcd.dispatch_unique(8, handle_timeout)
    else
        self.run_test_btn.enable()
    end

    if self.self_check_pass then
        TextBox{parent=sc_log,text="> all tests passed!",fg_bg=cpair(colors.blue,colors._INHERIT)}
        TextBox{parent=sc_log,text=""}
        local more = Div{parent=sc_log,height=3,fg_bg=cpair(colors.gray,colors._INHERIT)}
        TextBox{parent=more,text="if you still have a problem:"}
        TextBox{parent=more,text="- check the wiki on GitHub"}
        TextBox{parent=more,text="- ask for help on GitHub discussions or Discord"}
    end
end

-- exit self check back home
---@param sc_log graphics_element
---@param main_pane graphics_element
local function exit_self_check(sc_log, main_pane)
    tcd.abort(handle_timeout)
    self.net_listen = false
    self.run_test_btn.enable()
    sc_log.remove_all()
    main_pane.set_value(1)
end

local check = {}

-- create the self-check view
---@param main_pane graphics_element
---@param settings_cfg plc_config
---@param check_sys graphics_element
---@param style table
function check.create(main_pane, settings_cfg, check_sys, style)
    local bw_fg_bg      = style.bw_fg_bg
    local g_lg_fg_bg    = style.g_lg_fg_bg
    local nav_fg_bg     = style.nav_fg_bg
    local btn_act_fg_bg = style.btn_act_fg_bg
    local btn_dis_fg_bg = style.btn_dis_fg_bg

    self.settings = settings_cfg

    local sc = Div{parent=check_sys,x=2,y=4,width=49}

    TextBox{parent=check_sys,x=1,y=2,text=" Reactor PLC Self-Check",fg_bg=bw_fg_bg}

    local sc_log = ListBox{parent=sc,x=1,y=1,height=12,width=49,scroll_height=100,fg_bg=bw_fg_bg,nav_fg_bg=g_lg_fg_bg,nav_active=cpair(colors.black,colors.gray)}

    local last_check = { nil, nil }

    function self.self_check_msg(msg, success, fail_msg)
        if type(msg) == "string" then
            last_check[1] = Div{parent=sc_log,height=1}
            local e = TextBox{parent=last_check[1],text=msg,fg_bg=bw_fg_bg}
            last_check[2] = e.get_x()+string.len(msg)
        end

        if type(fail_msg) == "string" then
            TextBox{parent=last_check[1],x=last_check[2],y=1,text=tri(success,"PASS","FAIL"),fg_bg=tri(success,cpair(colors.green,colors._INHERIT),cpair(colors.red,colors._INHERIT))}

            if not success then
                local fail = Div{parent=sc_log,height=#util.strwrap(fail_msg, 46)}
                TextBox{parent=fail,x=3,text=fail_msg,fg_bg=cpair(colors.gray,colors.white)}
            end

            self.self_check_pass = self.self_check_pass and success
        end
    end

    PushButton{parent=sc,x=1,y=14,text="\x1b Back",callback=function()exit_self_check(sc_log,main_pane)end,fg_bg=nav_fg_bg,active_fg_bg=btn_act_fg_bg}
    self.run_test_btn = PushButton{parent=sc,x=40,y=14,min_width=10,text="Run Test",callback=function()self_check(sc_log)end,fg_bg=cpair(colors.black,colors.blue),active_fg_bg=btn_act_fg_bg,dis_fg_bg=btn_dis_fg_bg}
end

-- handle incoming modem messages
---@param side string
---@param sender integer
---@param reply_to integer
---@param message any
---@param distance integer
function check.receive_sv(side, sender, reply_to, message, distance)
    if self.nic ~= nil and self.net_listen then
        local s_pkt = self.nic.receive(side, sender, reply_to, message, distance)

        if s_pkt and s_pkt.protocol() == PROTOCOL.SCADA_MGMT then
            local mgmt_pkt = comms.mgmt_packet()
            if mgmt_pkt.decode(s_pkt) then
                tcd.abort(handle_timeout)
                handle_packet(mgmt_pkt.get())
            end
        end
    end
end

return check