ESPHome-Devices/pool_pumps.yaml

substitutions:
  device_id: pool_pumps
  device_name: Pool Pumps
  platform: ESP8266
  board: modwifi
  ip_address: !secret pool_pumps_ip
  ota_pwd: !secret pool_pumps_ota_pwd
  api_pwd: !secret pool_pumps_api_pwd
  ap_wifi_pwd: !secret pool_pumps_ap_wifi_pwd

esphome:
  <<: !include common/esphome.yaml

<<: !include common/common.yaml
<<: !include common/logger/logger_debug_no_serial.yaml

binary_sensor:
  - !include common/binary_sensor/status.yaml

i2c:
  sda: GPIO12
  scl: GPIO14

sensor:
  - !include common/sensor/uptime.yaml
  - !include common/sensor/wifi.yaml
  - platform: ade7953
    voltage:
      name: ${device_name} Voltage
    current_a:
      name: Pool Cleaner Current
    current_b:
      name: Pool Pump Current
    active_power_a:
      name: Pool Cleaner Power
      filters:
        - multiply: -1
    active_power_b:
      name: Pool Pump Power
      filters:
        - multiply: -1
    update_interval: 2s
  - platform: ntc
    sensor: temp_resistance_reading
    name: ${device_name} Temperature
    unit_of_measurement: "°C"
    accuracy_decimals: 1
    icon: "mdi:thermometer"
    calibration:
      b_constant: 3350
      reference_resistance: 10kOhm
      reference_temperature: 298.15K
  - platform: resistance
    id: temp_resistance_reading
    sensor: temp_analog_reading
    configuration: DOWNSTREAM
    resistor: 32kOhm
  - platform: adc
    id: temp_analog_reading
    pin: A0
  - platform: template
    name: "Pool Mode Id"
    id: pool_mode_id
    internal: true

status_led:
  pin:
    number: GPIO0
    inverted: yes

switch:
  - !include common/switch/restart.yaml
  - platform: gpio
    pin: GPIO4
    name: "Pool Pump"
    id: pool_pump
    on_turn_off:
      then:
        - switch.turn_off: pool_cleaner
  - platform: gpio
    pin: GPIO15
    name: "Pool Cleaner"
    id: pool_cleaner
    on_turn_on:
      then:
        - switch.turn_on: pool_pump

text_sensor:
  - !include common/text_sensor/version.yaml
  - !include common/text_sensor/wifi.yaml
  - platform: homeassistant
    name: "Pool Mode Text"
    entity_id: input_select.pool_mode
    on_value:
      then:
        - sensor.template.publish:
            id: pool_mode_id
            state: !lambda 'return x == "Off" ? 0 : x == "Normal" ? 1 : x == "Continuous Without Heat" ? 2 : x == "Continuous With Heat" ? 3 : id(pool_mode_id).state;'

time:
  - platform: homeassistant
    id: the_time
    on_time:
      seconds: 0
      minutes: 0,15,30,45
      then:
        lambda: |-
          if (id(pool_mode_id).state == 1) {
            auto now = id(the_time).now(); 
            int hour = now.hour;
            int minute = now.minute;

            if (hour == 5 && minute == 0) {
              auto ha_service = new api::HomeAssistantServiceCallAction<>(api_apiserver);
              ha_service->set_service("switch.turn_off");
              ha_service->set_data({api::KeyValuePair("entity_id", "switch.pool_heater")});
              ha_service->play();
              id(pool_pump).turn_on();
              id(pool_cleaner).turn_on();
            }
            else if (hour == 7 && minute == 0) {
              id(pool_pump).turn_on();
              id(pool_cleaner).turn_off();
              auto ha_service = new api::HomeAssistantServiceCallAction<>(api_apiserver);
              ha_service->set_service("switch.turn_on");
              ha_service->set_data({api::KeyValuePair("entity_id", "switch.pool_heater")});
              ha_service->play();
            }
            else if (hour >= 8 && hour <= 21 && (minute == 0 || minute == 30)) {
              id(pool_pump).turn_off();
            }
            else if (hour >= 8 && hour <= 21 && (minute == 15 || minute == 45)) {
              id(pool_pump).turn_on();
              id(pool_cleaner).turn_off();
              auto ha_service = new api::HomeAssistantServiceCallAction<>(api_apiserver);
              ha_service->set_service("switch.turn_on");
              ha_service->set_data({api::KeyValuePair("entity_id", "switch.pool_heater")});
              ha_service->play();
            }
            else if (hour == 22 && minute == 0) {
              auto ha_service = new api::HomeAssistantServiceCallAction<>(api_apiserver);
              ha_service->set_service("switch.turn_off");
              ha_service->set_data({api::KeyValuePair("entity_id", "switch.pool_heater")});
              ha_service->play();
              id(pool_cleaner).turn_off();
              id(pool_pump).turn_off();
            }
          }