A bunch of misc changes (#32)

* Temporarily disable the heater

* Shell of new garage fridge component

* Core code should be mostly complete

* Add power monitoring and freezer temp control

* Wrap up core temperature management code

* Add fixed InkBird component

* The new fridge manages temp in the freezer better so we are able to greatly simplify things

* Finish garage fridge

* Misc changes

Co-authored-by: Chris Nussbaum <chris.nussbaum@protolabs.com>

components/binary_light_with_power/light.py

@@ -9,7 +9,7 @@ from esphome.const import (
     UNIT_WATT,
     DEVICE_CLASS_POWER,
     STATE_CLASS_MEASUREMENT,
-    ICON_POWER,
+    ICON_FLASH,
     CONF_UPDATE_INTERVAL,
 )
 
@@ -27,7 +27,7 @@ CONFIG_SCHEMA = light.BINARY_LIGHT_SCHEMA.extend(
             accuracy_decimals=1,
             device_class=DEVICE_CLASS_POWER,
             state_class=STATE_CLASS_MEASUREMENT,
-            icon=ICON_POWER,
+            icon=ICON_FLASH,
         ).extend(
             {
                 cv.Optional(CONF_LIGHT_WATTAGE): cv.positive_float,

components/gpio_switch_with_power/gpio_switch_with_power.h

@@ -1,7 +1,7 @@
 #pragma once
 
 #include "esphome/core/component.h"
-#include "esphome/core/gpio.h"
+#include "esphome/core/hal.h"
 #include "esphome/components/sensor/sensor.h"
 #include "esphome/components/switch/switch.h"
 

components/gpio_switch_with_power/switch.py

@@ -11,7 +11,7 @@ from esphome.const import (
     UNIT_WATT,
     DEVICE_CLASS_POWER,
     STATE_CLASS_MEASUREMENT,
-    ICON_POWER,
+    ICON_FLASH,
     CONF_UPDATE_INTERVAL,
 )
 
@@ -47,7 +47,7 @@ CONFIG_SCHEMA = switch.SWITCH_SCHEMA.extend(
             accuracy_decimals=1,
             device_class=DEVICE_CLASS_POWER,
             state_class=STATE_CLASS_MEASUREMENT,
-            icon=ICON_POWER,
+            icon=ICON_FLASH,
         ).extend(
             {
                 cv.Optional(CONF_DEVICE_WATTAGE): cv.positive_float,

components/pool_controller/pump_switch.cpp

@@ -45,7 +45,7 @@ void PumpSwitch::setup() {
 
 void PumpSwitch::loop() {
   this->update_physical_switch_();
-  this->check_current_();
+  //this->check_current_();
 }
 
 void PumpSwitch::update() {

components/treo_led_pool_light/light.py

@@ -9,7 +9,7 @@ from esphome.const import (
     UNIT_WATT,
     DEVICE_CLASS_POWER,
     STATE_CLASS_MEASUREMENT,
-    ICON_POWER,
+    ICON_FLASH,
     CONF_UPDATE_INTERVAL,
 )
 
@@ -30,7 +30,7 @@ CONFIG_SCHEMA = cv.All(
                 accuracy_decimals=1,
                 device_class=DEVICE_CLASS_POWER,
                 state_class=STATE_CLASS_MEASUREMENT,
-                icon=ICON_POWER,
+                icon=ICON_FLASH,
             ).extend(
                 {
                     cv.Optional(CONF_LIGHT_WATTAGE): cv.positive_float,

components/tuya_dimmer_as_fan/fan.py

@@ -1,7 +1,7 @@
 from esphome.components import fan, sensor
 import esphome.config_validation as cv
 import esphome.codegen as cg
-from esphome.components.tuya import CONF_TUYA_ID, Tuya
+from esphome.components.tuya import tuya_ns, CONF_TUYA_ID, Tuya
 from esphome.const import (
     CONF_OUTPUT_ID,
     CONF_SWITCH_DATAPOINT,
@@ -19,8 +19,8 @@ CONF_DIMMER_DATAPOINT = "dimmer_datapoint"
 CONF_MAX_VALUE = "dimmer_max_value"
 CONF_FAN_WATTAGE = "fan_wattage"
 
-tuya_ns = cg.esphome_ns.namespace("tuya")
+TuyaFan = tuya_ns.class_("TuyaDimmerAsFan", cg.PollingComponent, fan.Fan)
-TuyaFan = tuya_ns.class_("TuyaDimmerAsFan", cg.Component)
+
 
 CONFIG_SCHEMA = cv.All(
     fan.FAN_SCHEMA.extend(
@@ -49,12 +49,10 @@ CONFIG_SCHEMA = cv.All(
 
 async def to_code(config):
     parent = await cg.get_variable(config[CONF_TUYA_ID])
-    state = await fan.create_fan_state(config)
 
-    var = cg.new_Pvariable(
+    var = cg.new_Pvariable(config[CONF_OUTPUT_ID], parent)
-        config[CONF_OUTPUT_ID], parent, state
-    )
     await cg.register_component(var, config)
+    await fan.register_fan(var, config)
 
     cg.add(var.set_switch_id(config[CONF_SWITCH_DATAPOINT]))
     cg.add(var.set_dimmer_id(config[CONF_DIMMER_DATAPOINT]))

components/tuya_dimmer_as_fan/tuya_dimmer_as_fan.cpp

@@ -8,19 +8,10 @@ namespace tuya {
 static const char *const TAG = "tuya.fan";
 
 void TuyaDimmerAsFan::setup() {
-  auto traits = fan::FanTraits(false, false, false, 1);
-  this->fan_->set_traits(traits);
-
   this->parent_->register_listener(*this->switch_id_, [this](const TuyaDatapoint &datapoint) {
-    auto call = this->fan_->make_call();
+    this->state = datapoint.value_bool;
-    call.set_state(datapoint.value_bool);
+    this->publish_state();
-    call.perform();
+    this->update();
-
-    if (this->fan_wattage_.has_value() && this->power_sensor_ != nullptr)
-    {
-      float power = datapoint.value_bool ? this->fan_wattage_.value() : 0.0f;
-      this->power_sensor_->publish_state(power);
-    }
   });
 
   this->parent_->register_listener(*this->dimmer_id_, [this](const TuyaDatapoint &datapoint) {
@@ -30,8 +21,6 @@ void TuyaDimmerAsFan::setup() {
     }
   });
 
-  this->fan_->add_on_state_callback([this]() { this->parent_->set_boolean_datapoint_value(*this->switch_id_, this->fan_->state); });
-
   // Make sure we start at the max value
   this->parent_->set_integer_datapoint_value(*this->dimmer_id_, this->dimmer_max_value_);
 }
@@ -42,11 +31,16 @@ void TuyaDimmerAsFan::dump_config() {
   ESP_LOGCONFIG(TAG, "  Dimmer has datapoint ID %u", *this->dimmer_id_);
 }
 
+void TuyaDimmerAsFan::control(const fan::FanCall &call) {
+  this->parent_->set_boolean_datapoint_value(*this->switch_id_, *call.get_state());
+}
+
 void TuyaDimmerAsFan::update()
 {
-  if (this->fan_wattage_.has_value() && this->power_sensor_ != nullptr && this->fan_->state)
+  if (this->fan_wattage_.has_value() && this->power_sensor_ != nullptr)
   {
-    this->power_sensor_->publish_state(this->fan_wattage_.value());
+    float power = this->state ? this->fan_wattage_.value() : 0.0f;
+    this->power_sensor_->publish_state(power);
   }
 }
 

components/tuya_dimmer_as_fan/tuya_dimmer_as_fan.h

@@ -8,9 +8,9 @@
 namespace esphome {
 namespace tuya {
 
-class TuyaDimmerAsFan : public PollingComponent {
+class TuyaDimmerAsFan : public PollingComponent, public fan::Fan {
  public:
-  TuyaDimmerAsFan(Tuya *parent, fan::FanState *fan) : parent_(parent), fan_(fan) {}
+  TuyaDimmerAsFan(Tuya *parent) : parent_(parent) {}
   void setup() override;
   void dump_config() override;
   void set_switch_id(uint8_t switch_id) { this->switch_id_ = switch_id; }
@@ -18,14 +18,16 @@ class TuyaDimmerAsFan : public PollingComponent {
   void set_dimmer_max_value(uint32_t max_value) { this->dimmer_max_value_ = max_value; }
   void set_fan_wattage(float fan_wattage) { this->fan_wattage_ = fan_wattage; }
   void set_power_sensor(sensor::Sensor *power_sensor) { this->power_sensor_ = power_sensor; }
+  fan::FanTraits get_traits() override { return fan::FanTraits(false, false, false, 1); }
   void update() override;
 
  protected:
+  void control(const fan::FanCall &call) override;
+
   Tuya *parent_;
   optional<uint8_t> switch_id_{};
   optional<uint8_t> dimmer_id_{};
   uint32_t dimmer_max_value_ = 255;
-  fan::FanState *fan_;
   optional<float> fan_wattage_{};
   sensor::Sensor *power_sensor_;
 };

components/tuya_light_plus/tuya_light_plus.cpp

@@ -178,10 +178,8 @@ void TuyaLightPlus::handle_tuya_datapoint_(tuya::TuyaDatapoint datapoint)
         }
       }
     
-      // When the light is turned on at the switch the level of the Tuya device will stll be 0 so we set it to the current state value
+      // When the light is turned on at the switch the level of the Tuya device will stll be 0 so we set it to the default brightness or 1.0 if no default
-      float brightness;
+      this->parent_->set_integer_datapoint_value(*this->dimmer_id_, this->brightness_to_tuya_level_(this->default_brightness_.value_or(1.0)));
-      this->state_->current_values_as_brightness(&brightness);
-      this->parent_->set_integer_datapoint_value(*this->dimmer_id_, this->brightness_to_tuya_level_(brightness));
     }
 
     // Turned off with the physical button
@@ -199,15 +197,12 @@ void TuyaLightPlus::handle_tuya_datapoint_(tuya::TuyaDatapoint datapoint)
     this->tuya_state_is_on_ = datapoint.value_bool;
     this->state_->current_values.set_state(datapoint.value_bool);
 
-    // If the light was turned off we set the brightness of the Tuya device to 0 to prevent flashes during double clicks and if there is a
+    // If the light was turned off we set the brightness of the Tuya device to 0 to prevent flashes during double clicks and set the current
-    // default brightness set the current brightness value to the default so that if it is turned on remotely it will be at the default value
+    // brightness value to the default value or 1.0 if no default so that if it is turned on remotely it will be at the default value
     if (!datapoint.value_bool)
     {
       this->parent_->set_integer_datapoint_value(*this->dimmer_id_, 0);
-      if (this->default_brightness_.has_value())
+      this->state_->current_values.set_brightness(this->default_brightness_.value_or(1.0));
-      {
-        this->state_->current_values.set_brightness(*this->default_brightness_);
-      }
     }
   }
   else if (datapoint.id == *this->dimmer_id_)

devices/basement_bathroom_light_fan.yaml

@@ -1,7 +1,6 @@
 substitutions:
   device_id: basement_bathroom_light_fan
   device_name: Basement Bathroom Light and Fan
-  platform: ESP8266
   board: esp01_1m
   ip_address: !secret basement-bathroom-light-fan-ip
   ota_pwd: !secret basement-bathroom-light-fan-ota-pwd

devices/basement_bathroom_sensor.yaml

@@ -1,7 +1,6 @@
 substitutions:
   device_id: basement_bathroom_sensor
   device_name: Basement Bathroom Sensor
-  platform: ESP8266
   board: d1_mini
   ip_address: !secret basement-bathroom-sensor-ip
   ota_pwd: !secret basement-bathroom-sensor-ota-pwd

devices/basement_bathroom_shower_light_heater.yaml

@@ -1,7 +1,6 @@
 substitutions:
   device_id: basement_bath_shower_light_heat
   device_name: Basement Bathroom Shower Light and Heater
-  platform: ESP8266
   board: esp01_1m
   ip_address: !secret basement-bathroom-shower-light-heater-ip
   ota_pwd: !secret basement-bathroom-shower-light-heater-ota-pwd

devices/coffee_maker.yaml

@@ -1,7 +1,6 @@
 substitutions:
   device_id: coffee_maker
   device_name: Coffee Maker
-  platform: ESP8266
   board: nodemcuv2
   ip_address: !secret coffee-maker-ip
   ota_pwd: !secret coffee-maker-ota-pwd

devices/computer_light.yaml

@@ -29,4 +29,5 @@ light:
     power:
       id: power
       name: ${device_name} Power
+      icon: mdi:flash
       light_wattage: 11.8

devices/fire_pit_fountain.yaml

@@ -1,7 +1,6 @@
 substitutions:
   device_id: fire_pit_fountain
   device_name: Fire Pit and Fountain
-  platform: ESP8266
   board: d1_mini
   ip_address: !secret fire-pit-fountain-ip
   ota_pwd: !secret fire-pit-fountain-ota-pwd

devices/garage-lights.yaml

@@ -0,0 +1,11 @@
+substitutions:
+  device_id: garage-lights
+  device_name: Garage Lights
+  ip_address: !secret garage-lights-ip
+  ota_pwd: !secret garage-lights-ota-pwd
+  api_pwd: !secret garage-lights-api-pwd
+  ap_wifi_pwd: !secret garage-lights-ap-pwd
+  light_wattage: '378'
+
+packages:
+  shelly_1l: !include ../packages/shelly_1l.yaml

devices/master-bath-hum-temp-sensor.yaml

@@ -1,12 +1,11 @@
 substitutions:
-  device_id: master_bath_humidity_temp_sensor
+  device_id: master-bath-hum-temp-sensor
   device_name: Master Bathroom Humidity and Temperature Sensor
-  platform: ESP8266
   board: d1_mini
-  ip_address: !secret master-bath-humidity-temp-sensor-ip
+  ip_address: !secret master-bath-hum-temp-sensor-ip
-  ota_pwd: !secret master-bath-humidity-temp-sensor-ota-pwd
+  ota_pwd: !secret master-bath-hum-temp-sensor-ota-pwd
-  api_pwd: !secret master-bath-humidity-temp-sensor-api-pwd
+  api_pwd: !secret master-bath-hum-temp-sensor-api-pwd
-  ap_wifi_pwd: !secret master-bath-humidity-temp-sensor-ap-pwd
+  ap_wifi_pwd: !secret master-bath-hum-temp-sensor-ap-pwd
 
 packages:
   device_base: !include ../packages/device_base.yaml

devices/master_bed.yaml

@@ -1,7 +1,6 @@
 substitutions:
   device_id: master_bed
   device_name: Master Bed
-  platform: ESP8266
   board: nodemcuv2
   ip_address: !secret master-bed-ip
   ota_pwd: !secret master-bed-ota-pwd

devices/patio-lights.yaml

@@ -1,7 +1,6 @@
 substitutions:
-  device_id: patio_lights
+  device_id: patio-lights
   device_name: Patio Lights
-  platform: ESP8266
   board: d1_mini
   ip_address: !secret patio-lights-ip
   ota_pwd: !secret patio-lights-ota-pwd

devices/pool_and_patio_lights.yaml

@@ -1,7 +1,6 @@
 substitutions:
   device_id: pool_and_patio_lights
   device_name: Pool and Patio Lights
-  platform: ESP8266
   board: esp01_1m
   ip_address: !secret pool-and-patio-lights-ip
   ota_pwd: !secret pool-and-patio-lights-ota-pwd
@@ -77,6 +76,7 @@ light:
 sensor:
   - platform: total_daily_energy
     name: Pool Lights
+    icon: mdi:flash
     power_id: pool_light_power
     method: left
     min_save_interval: 10min

devices/pool_pumps.yaml

@@ -1,7 +1,6 @@
 substitutions:
   device_id: pool_pumps
   device_name: Pool Pumps
-  platform: ESP8266
   board: modwifi
   ip_address: !secret pool-pumps-ip
   ota_pwd: !secret pool-pumps-ota-pwd
@@ -97,11 +96,13 @@ sensor:
     pin: A0
   - platform: total_daily_energy
     name: "Pool Pump Total Daily Energy"
+    icon: mdi:flash
     power_id: pool_pump_power
     method: left
     min_save_interval: 10min
   - platform: total_daily_energy
     name: "Pool Cleaner Total Daily Energy"
+    icon: mdi:flash
     power_id: pool_cleaner_power
     method: left
     min_save_interval: 10min

devices/scripture_of_the_day_test.yaml

@@ -0,0 +1,53 @@
+substitutions:
+  platform: esp32
+  board: esp32dev
+  log_level: none
+  wifi_ssid: secret_wifi_ssid
+  wifi_password: secret_wifi_password
+  device_id: scripture-of-the-day-test
+  device_name: Scripture of the Day Test
+
+esphome:
+  name: ${device_id}
+  platform: ${platform}
+  board: ${board}
+  arduino_version: latest
+  build_path: ../build/${device_id}
+
+packages:
+  wifi:   !include ../packages/wifi/wifi_dhcp.yaml
+  logger: !include ../packages/logger/logger.yaml
+
+external_components:
+  - source:
+      type: local
+      path: ../../esphome/esphome/components
+    components: [ ds3231 ]
+
+i2c:
+
+ds3231:
+  id: ds_rtc
+
+time:
+  - platform: sntp
+    id: sntp_cmp
+    timezone: America/Chicago
+  - platform: ds3231
+    id: rtc
+    timezone: America/Chicago
+    on_time_sync:
+      then:
+        - ds3231.set_alarm_1:
+            id: ds_rtc
+            alarm_type: match_day_of_month_hour_minute_second
+            second: 1
+            minute: 2
+            hour: 3
+            day: 4
+        - ds3231.reset_alarm_1:
+            id: ds_rtc
+        - ds3231.set_alarm_2:
+            id: ds_rtc
+            alarm_type: every_minute
+        - ds3231.reset_alarm_2: ds_rtc

packages/feit_dimmer.yaml

@@ -1,5 +1,4 @@
 substitutions:
-  platform: ESP8266
   board: esp01_1m
 
 external_components:
@@ -24,6 +23,7 @@ espsense:
 sensor:
   - platform: total_daily_energy
     name: ${device_name}
+    icon: mdi:flash
     power_id: power
     method: left
     min_save_interval: 10min

packages/feit_dimmer_as_fan.yaml

@@ -1,5 +1,4 @@
 substitutions:
-  platform: ESP8266
   board: esp01_1m
 
 external_components:

packages/feit_dimmer_without_power.yaml

@@ -1,5 +1,4 @@
 substitutions:
-  platform: ESP8266
   board: esp01_1m
 
 external_components:

packages/shelly_1l.yaml

@@ -0,0 +1,69 @@
+substitutions:
+  board: esp01_1m
+  light_wattage: '0'
+
+external_components:
+  - source:
+      type: local
+      path: ../components 
+    components: [ binary_light_with_power ]
+  - source: github://cbpowell/ESPSense
+    components: [ espsense ]
+
+packages:
+  base:   !include device_base.yaml
+  logger: !include logger/logger.yaml
+
+binary_sensor:
+  - platform: gpio
+    id: on_button
+    pin:
+      number: GPIO4
+    filters:
+      - delayed_on_off: 50ms
+    on_press:
+      then:
+        - light.turn_on: shelly_light
+  - platform: gpio
+    id: off_button
+    pin:
+      number: GPIO14
+    filters:
+      - delayed_on_off: 50ms
+    on_press:
+      then:
+        - light.turn_off: shelly_light
+
+espsense:
+  plugs:
+    - name: ${device_name}
+      power_sensor: light_power
+      voltage: 120
+
+light:
+  - platform: binary_light_with_power
+    id: shelly_light
+    name: ${device_name}
+    output: shelly_relay
+    power:
+      id: light_power
+      name: ${device_name} Power
+      light_wattage: ${light_wattage}
+
+output:
+  - platform: gpio
+    pin: GPIO5
+    id: shelly_relay
+
+sensor:
+  - platform: total_daily_energy
+    name: ${device_name}
+    power_id: light_power
+    method: left
+    min_save_interval: 10min
+
+status_led:
+  pin: GPIO0
+    
+time:
+  - platform: homeassistant

packages/topgreener_smart_plug.yaml

@@ -1,6 +1,5 @@
 # Model TGWF115PQM
 substitutions:
-  platform: ESP8266
   board: esp01_1m
   restore_mode: ALWAYS_ON
 
@@ -14,7 +13,7 @@ packages:
 
 binary_sensor:
   - platform: gpio
-    id: button
+    id: power_button
     pin:
       number: GPIO3
       inverted: True
@@ -49,6 +48,7 @@ sensor:
     update_interval: 2s
   - platform: total_daily_energy
     name: ${device_name}
+    icon: mdi:flash
     power_id: power
     method: trapezoid
     min_save_interval: 10min
@@ -61,6 +61,7 @@ status_led:
 switch:
   - platform: gpio
     name: ${device_name} Power Switch
+    icon: mdi:power
     id: relay
     pin: GPIO14
     restore_mode: ${restore_mode}

packages/topgreener_smart_plug_as_fan.yaml

@@ -0,0 +1,72 @@
+# Model TGWF115PQM
+substitutions:
+  board: esp01_1m
+  restore_mode: ALWAYS_ON
+
+external_components:
+  - source: github://cbpowell/ESPSense
+    components: [ espsense ]
+
+packages:
+  base:   !include device_base.yaml
+  logger: !include logger/logger_no_serial.yaml
+
+binary_sensor:
+  - platform: gpio
+    id: button
+    pin:
+      number: GPIO3
+      inverted: True
+    on_press:
+      then:
+        - switch.toggle: relay
+        
+espsense:
+  plugs:
+    - name: ${device_name}
+      power_sensor: power
+      voltage: 120
+
+fan:
+  - platform: binary
+    name: ${device_name}
+    output: relay
+
+output:
+  - platform: gpio
+    name: ${device_name}
+    id: relay
+    pin: GPIO14
+
+sensor:
+  - platform: hlw8012
+    sel_pin:
+      number: GPIO12
+      inverted: True
+    cf_pin: GPIO04
+    cf1_pin: GPIO5
+    current_resistor: "0.0019"
+    voltage_divider: "2150"
+    current:
+      name: ${device_name} Current
+      unit_of_measurement: A
+    power:
+      id: power
+      name: ${device_name} Power
+      unit_of_measurement: W
+    initial_mode: CURRENT
+    change_mode_every: 4294967295
+    update_interval: 2s
+  - platform: total_daily_energy
+    name: ${device_name}
+    power_id: power
+    method: trapezoid
+    min_save_interval: 10min
+
+status_led:
+  pin:
+    number: GPIO13
+    inverted: False
+
+time:
+  - platform: homeassistant