Add front and living room lights

Add master bath fan, second light dimmer, and temp/humidity sensor
Fix occasional issue with tripping the over current on the pool pumps

.example_gosund_dimmer.yaml

@@ -0,0 +1,44 @@
+substitutions:
+  device_id: example_gosund_dimmer
+  device_name: Example Light
+  platform: ESP8266
+  board: esp01_1m
+  ip_address: !secret example_gosund_dimmer_ip
+  ota_pwd: !secret example_gosund_dimmer_ota_pwd
+  api_pwd: !secret example_gosund_dimmer_pwd
+  ap_wifi_pwd: !secret example_gosund_dimmer_ap_wifi_pwd
+
+  day_level: '100'
+  night_level: '10'
+
+esphome:
+  <<: !include common/esphome.yaml
+  includes:
+    - gosund_sw2_dimmer.h
+
+<<: !include common/common_gosund_dimmer.yaml
+<<: !include common/logger/logger_debug_no_serial.yaml
+
+binary_sensor:
+  - !include common/binary_sensor/status.yaml
+  - !include common/binary_sensor/day_night.yaml
+  - !include common/binary_sensor/gosund_dimmer_button.yaml
+
+sensor:
+  - !include common/sensor/uptime.yaml
+  - !include common/sensor/wifi.yaml
+
+switch:
+  - !include common/switch/restart.yaml
+
+text_sensor:
+  - !include common/text_sensor/version.yaml
+  - !include common/text_sensor/wifi.yaml
+
+script:
+  - id: single_tap
+    then:
+      - logger.log: "Single Tap"
+  - id: double_tap
+    then:
+      - logger.log: "Double Tap"

README.md

@@ -31,6 +31,10 @@
 ## Switches
 > I plan to use dimmer switches for anything that is dimmable just for consistency and you never know when you might want to have the ability to dim a light.  However there are times when a dimmer isn't an option.
 
+> ### [Laghten Smart Switch](https://www.amazon.com/gp/product/B07VMDQ3WT/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1)
+> This is not my favorite device, I was going for a switch to control a couple of non-light devices that looked/felt similar to the [Feit Dimmers](https://www.amazon.com/gp/product/B07SXDFH38/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1) I am using for most of my lights.  This was about as close as I could get, the light is significantly dimmer and I don't care for the loose feeling of the button but it works, I really wish Feit made a switch to match their dimmers.
+> > * Master Bathroom Fan
+
 > ### [SANA Dual Switch](https://www.amazon.com/gp/product/B07QC5ZCHP/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&th=1)
 > My basement bathroom has 4 devices (main light, fan, shower light, heat lamps) but only 2 single gang boxes (and not enough room to swith to dual gang) so these were a perfect fit.  The prices is right, the buttons feel solid, and I was able to flash them using [Tuya-Convert](https://github.com/ct-Open-Source/tuya-convert).  They do seem to have corners that are squarer then typical so I had a little bit of trouble getting a standard cover to fit but nothing I couldn't fix with a file.
 > > * Basement Bathroom Light and Fan
@@ -64,5 +68,5 @@
 > > * Family Room Light
 > > * Kitchen Bar Lights
 > > * Kitchen Table Light
-> > * Master Bathroom Lights
+> > * Master Bathroom Lights/Master Bathroom Lights 2
 > > * Office Light

front_lights.yaml

@@ -0,0 +1,15 @@
+substitutions:
+  device_id: front_lights
+  device_name: Front Lights
+  platform: ESP8266
+  board: esp01_1m
+  ip_address: !secret front_lights_ip
+  ota_pwd: !secret front_lights_ota_pwd
+  api_pwd: !secret front_lights_api_pwd
+  ap_wifi_pwd: !secret front_lights_ap_wifi_pwd
+  day_brightness: "1"
+  night_brightness: "1"
+  night_auto_off_time: 15min
+  linked_lights: ""
+
+<<: !include common/device_tuya_dimmer.yaml

living_room_lights.yaml

@@ -7,38 +7,9 @@ substitutions:
   ota_pwd: !secret living_room_lights_ota_pwd
   api_pwd: !secret living_room_lights_api_pwd
   ap_wifi_pwd: !secret living_room_lights_ap_wifi_pwd
+  day_brightness: "1"
+  night_brightness: ".03"
+  night_auto_off_time: 15min
+  linked_lights: ""
 
-  day_level: '100'
+<<: !include common/device_tuya_dimmer.yaml
-  night_level: '10'
-
-esphome:
-  <<: !include common/esphome.yaml
-  includes:
-    - gosund_sw2_dimmer.h
-
-<<: !include common/common_gosund_dimmer.yaml
-<<: !include common/logger/logger_debug_no_serial.yaml
-
-binary_sensor:
-  - !include common/binary_sensor/status.yaml
-  - !include common/binary_sensor/day_night.yaml
-  - !include common/binary_sensor/gosund_dimmer_button.yaml
-
-sensor:
-  - !include common/sensor/uptime.yaml
-  - !include common/sensor/wifi.yaml
-
-switch:
-  - !include common/switch/restart.yaml
-
-text_sensor:
-  - !include common/text_sensor/version.yaml
-  - !include common/text_sensor/wifi.yaml
-
-script:
-  - id: single_tap
-    then:
-      - logger.log: "Single Tap"
-  - id: double_tap
-    then:
-      - logger.log: "Double Tap"

master_bath_fan.yaml

@@ -0,0 +1,56 @@
+substitutions:
+  device_id: master_bath_fan
+  device_name: Master Bathroom Fan
+  platform: ESP8266
+  board: esp01_1m
+  ip_address: !secret master_bath_fan_ip
+  ota_pwd: !secret master_bath_fan_ota_pwd
+  api_pwd: !secret master_bath_fan_api_pwd
+  ap_wifi_pwd: !secret master_bath_fan_ap_wifi_pwd
+
+esphome:
+  <<: !include common/esphome.yaml
+
+<<: !include common/common.yaml
+<<: !include common/logger/logger_none.yaml
+
+binary_sensor:
+  - !include common/binary_sensor/status.yaml
+  - platform: gpio
+    id: fan_button
+    pin:
+      number: 13
+      mode: INPUT_PULLUP
+    on_press:
+      then:
+        - fan.toggle: the_fan
+
+fan:
+  - platform: binary
+    id: the_fan
+    output: fan_output
+    name: ${device_name}
+
+output:
+  - platform: gpio
+    id: fan_output
+    pin: 12
+  - platform: gpio
+    id: button_led
+    pin: 4
+
+sensor:
+  - !include common/sensor/uptime.yaml
+  - !include common/sensor/wifi.yaml
+
+status_led:
+  pin:
+    number: 5
+    inverted: true
+
+switch:
+  - !include common/switch/restart.yaml
+
+text_sensor:
+  - !include common/text_sensor/version.yaml
+  - !include common/text_sensor/wifi.yaml

master_bath_humidity_temp_sensor.yaml

@@ -0,0 +1,74 @@
+substitutions:
+  device_id: master_bath_humidity_temp_sensor
+  device_name: Master Bathroom Humidity and Temperature Sensor
+  platform: ESP8266
+  board: d1_mini
+  ip_address: !secret master_bath_humidity_temp_sensor_ip
+  ota_pwd: !secret master_bath_humidity_temp_sensor_ota_pwd
+  api_pwd: !secret master_bath_humidity_temp_sensor_api_pwd
+  ap_wifi_pwd: !secret master_bath_humidity_temp_sensor_ap_wifi_pwd
+
+esphome:
+  <<: !include common/esphome.yaml
+
+<<: !include common/common.yaml
+<<: !include common/logger/logger_none.yaml
+
+i2c:
+  sda: D2
+  scl: D1
+  scan: true
+
+binary_sensor:
+  - !include common/binary_sensor/status.yaml
+  
+  - platform: template
+    id: trigger_humidity
+    lambda: return (id(humidity).state - id(median_humidity).state) > 5;
+    filters:
+      - delayed_off: 5min
+  
+output:
+  - platform: gpio
+    pin: D3
+    id: bme_gnd
+
+sensor:
+  - !include common/sensor/uptime.yaml
+  - !include common/sensor/wifi.yaml
+  - platform: bme280
+    temperature:
+      id: temperature
+      name: "Master Bathroom Temperature"
+    pressure:
+      id: pressure
+      name: "Master Bathroom Pressure"
+    humidity:
+      id: humidity
+      name: "Master Bathroom Humidity"
+    address: 0x76
+    update_interval: 15s
+  - platform: template
+    name: "Master Bathroom Median Humidity"
+    id: median_humidity
+    unit_of_measurement: '%'
+    icon: mdi:water-percent
+    lambda: return id(humidity).state;
+    update_interval: 60s
+    filters:
+      - median:
+          window_size: 360
+          send_every: 2
+          send_first_at: 2
+
+status_led:
+  pin:
+    number: D4
+    inverted: true
+
+switch:
+  - !include common/switch/restart.yaml
+
+text_sensor:
+  - !include common/text_sensor/version.yaml
+  - !include common/text_sensor/wifi.yaml

master_bath_lights_2.yaml

@@ -0,0 +1,15 @@
+substitutions:
+  device_id: master_bath_lights_2
+  device_name: Master Bathroom Lights 2
+  platform: ESP8266
+  board: esp01_1m
+  ip_address: !secret master_bath_lights_2_ip
+  ota_pwd: !secret master_bath_lights_2_ota_pwd
+  api_pwd: !secret master_bath_lights_2_api_pwd
+  ap_wifi_pwd: !secret master_bath_lights_2_ap_wifi_pwd
+  day_brightness: "1"
+  night_brightness: ".05"
+  night_auto_off_time: 15min
+  linked_lights: ""
+
+<<: !include common/device_tuya_dimmer.yaml

pool_pumps.yaml

@@ -32,15 +32,39 @@ sensor:
     current_a:
       name: Pool Cleaner Current
       filters:
-        - lambda: "return x < .1 ? 0 : x;"
+        - lambda: |-
+            // Filter the initial high current spike when the motor starts to prevent tripping the on_value_range logic
+            static float last_cleaner_current = 0.0;
+            if (isnan(x))
+            {
+              return {};
+            }
+            if (last_cleaner_current <= 7 && x > 7)
+            {
+              last_cleaner_current = x;
+              return {};
+            }
+            return last_cleaner_current = x < .1 ? 0.0 : x;
       on_value_range:
-        above: 10
+        above: 7
         then:
           - switch.turn_off: pool_cleaner
     current_b:
       name: Pool Pump Current
       filters:
-        - lambda: "return x < .1 ? 0 : x;"
+        - lambda: |-
+            // Filter the initial high current spike when the motor starts to prevent tripping the on_value_range logic
+            static float last_pump_current = 0.0;
+            if (isnan(x))
+            {
+              return {};
+            }
+            if (last_pump_current <= 8 && x > 8)
+            {
+              last_pump_current = x;
+              return {};
+            }
+            return last_pump_current = x < .1 ? 0.0 : x;
       on_value_range:
         above: 8
         then: