ESPHome-Devices

Overview

This is a collection of ESPHome configuration files and code for my various ESP8266/ESP32 devices that integrate with Home Assistant. I am using includes and packages pretty extensively in order to prevent duplication and allow for easy changing of common settings.

What is ESPHome
ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems. For more information checkout ESPHome.io.

What is Home Assistant
Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. For more information check out Home-Assistant.io.

Custom Devices

Basement Bathroom Sensor

This is a WEMOS D1 Mini clone that is connected to a motion sensor, a temperature/humidity/pressure sensor, and a door sensor and is used to control the lights, fan, and heater (heat lamps in the fan) in my basement bathroom.

Coffee Maker

This is a NodeMCU that I installed in my Cuisinart Coffee Maker. It has GPIO's connected to the indicator lights for the bold setting and power and has a couple of relays connected to the bold setting button and the power button. Aside from the ability to trigger automations based on the state of the coffee maker and automate turning on the coffee maker I also added a "bloom" feature. Coffee tastes better if you let the carbon dioxide escape (bloom) after getting the coffee grounds wet before continuing the brew cycle.

Fire Pit and Fountain

This is a WEMOS D1 Mini Pro that is connected to a couple of relays and a couple of water proof push buttons red and blue. The multi-click config on the fire pit switch is so that any press will turn it off but to turn it on you have to press it for 3 seconds (to try and prevent kids from turning it on). This is used to control the combination fire pit and fountain in my backyard. I just got this hooked up and is working good other then the fire pit doesn't always come on on the first try (I think I am getting some bounce in the switch but haven't had a chance to troubleshoot further).

Garage Fridge

This is a NodeMCU that I have installed in the back of my garage fridge and is connected to several temperature sensors that monitor the temperature of the compressor, the fridge, and the freezer and a pair of relays that control a heat tape wrapped around the compressor and a couple of heaters that are inside the fridge. This is to prevent the compressor from getting to cold (when it is cold the oil thickens up which is hard on the compressor), the fridge from dropping below freezing (frozen beer is no fun), and the freezer from getting to warm (when temperatures in the garage are around the desired fridge temperature the freezer tends to get to warm because of lack of cooling demand from the fridge so we warm the fridge up a little to get it to kick in the compressor).

Master Bed

This is a NodeMCU that I have installed under my bed and is connected to a pair of Force Sensitive Resistors that are placed between the mattress and box spring of my bed, one for my side and one for my wife's side. Because the ESP8266 has only one analog input I had to add some transistors connected to pins D0 and D1 that are used to select which FSR is connected to the A0 analog input. The custom sensors in bed_sensor.h handles switching between the FSR's and reading the values from the FSR's. Generally when the bed is empty the reading is the full 1024 (or at least close to this). If someone is on one side of the bed or the other the reading is typically around 100. However if you lay in the middle of the bed I tend to get readings of around 600-700 on both sides. Thus the 3 different binary sensors (Chris is in Bed, Melissa is in Bed, Someone is in Bed). There is also a Master Bed Count that reports the total number of people in bed, I compare this to a sensor in Home Assistant that tracks the number of "masters" (my wife and me) that are home so that I can activate night mode when everyone is in bed.

Patio Lights

This is a WEMOS D1 Mini Pro that is connected to a relay to control the power to the landscape lights around my patio. I used the WEMOS D1 Mini Pro because it has an external antenna. I initially used a WEMOS D1 Mini clone but the power supply for my lights was to far from the house and I kept having connectivity issues.

Pool Pumps

This is a Shelly 2.5 Double Relay Switch that is controlling the main pump on my pool and the auxillary pump that runs the pool cleaner. It turns the pump on and off through out the day and off at night (when we are least likely to be using the pool and when you get the most heat/water loss if the pump is running) and turns on the cleaner for a couple of hours in the morning. It also has some modes for Off (during the winter) and Continous when I need extra cleaning.

Scripture of the Day Melissa/Scripture of the Day Mayson

This is a project I just started working on recently, the code is complete but the build is not quite done. I am planning on building 2 of them as Christmas presents for my wife and son. It will consist of a ESP32 e-Paper Panel Driver Board powered by a lithium battery and TP4056 lithium battery charger module and driving a Waveshare 7.5inch 800×480 E-Ink display all mounted inside a wood frame I am building. The plan is to have it sit in deep-sleep most of the time but wake up every night, grab a random scripture from the Our Manna Daily Verses API, update the display with the verse, and go back to sleep.

Switches

I plan to use dimmer switches for anything that is dimmable just for consistency and you never know when you might want to have the ability to dim a light. However there are times when a dimmer isn't an option.

Laghten Smart Switch

This is not my favorite device, I was going for a switch to control a couple of non-light devices that looked/felt similar to the Feit Dimmers I am using for most of my lights. This was about as close as I could get, the light is significantly dimmer and I don't care for the loose feeling of the button but it works, I really wish Feit made a switch to match their dimmers.

• Master Bathroom Fan

SANA Dual Switch

My basement bathroom has 4 devices (main light, fan, shower light, heat lamps) but only 2 single gang boxes (and not enough room to swith to dual gang) so these were a perfect fit. The prices is right, the buttons feel solid, and I was able to flash them using Tuya-Convert. They do seem to have corners that are squarer then typical so I had a little bit of trouble getting a standard cover to fit but nothing I couldn't fix with a file.

• Basement Bathroom Light and Fan
• Basement Bathroom Shower Light and Heater

SANA Triple Switch

This is installed in place of the switch that controled my TREO LED Pool Lights. These lights have the option to select different colors by briefly turning them off and back on again and they do remember the last color when turned on again. The custom TreoLedPoolLight.h component handles tracking the current color and exposes custom "effects" for each of the colors to Home Assistant. I went with the triple switch so that I could use the third button to control my Patio Lights which otherwise do not have a physical switch. The one issue I am having with this is occasionally the "effect" on the switch gets out of sync with the actual color of the lights. It has only happened a couple of times so I haven't gotten around to investigating why it happens.

• Patio and Pool Lights

Dimmer Switches

Feit Dimmers

After trying several dimmers I finally decided to standardize on on the Feit Dimmers. I bought the first couple of these at Costco for a better price than Amazon but Costco doesn't seem to carry them anymore.
Things I like about these switches:

• Can be flashed using Tuya-Convert
• Have a solid feel to them
• They can be linked via a traveler wire (this works even when flashed with ESPHome and while not mentioned in the documentation you can link more than 2 switches this way)

Things I don't like about these switches:

• Have to click repeatedly to change the brightness (can't hold to change)
• All buttons are managed by the Tuya MCU so adding things like double-taps is kind of a hack

I have created a custom tuya_light_plus.h component for these that extends the standard Tuya Light component that should work with most (if not all) Tuya dimmers and provides the following extra features:

• Resets the brightness level back to a default level when turned off so that it always comes on at the same level instead of the level it was at when turned off
• The default level is configurable as different levels when my house is in "Day" mode vs "Night" mode (based on a sensor in Home Assistant) and via a service in Home Assistant
• Provides an option to auto turn off the light after a period of time
• The auto turn off time is configurable to be different when my house is in "Day" mode vs "Night" mode (based on a sensor in Home Assistant) and via a service in Home Assistant
• Adds ability to specify a function to call when the switch is double tapped
• Allows you to "link" other light(s) in Home Assistant that will be controlled by this dimmer

The following devices are Feit Dimmers:

• Basement Stair Lights/Basement Stair Lights 2
• Computer Light
• Dining Room Light
• Family Room Light
• Front Entry Lights/Front Entry Lights 2
• Front Lights
• Kitchen Bar Lights
• Kitchen Table Light
• Living Room Lights
• Master Bathroom Lights/Master Bathroom Lights 2
• Office Light