Add see also section, update example config

README.md

@@ -9,9 +9,23 @@ Wirelessly control your Mitsubishi Comfort HeatPump with an ESP8266 or ESP32 usi
 * Uses the [SwiCago/HeatPump](https://github.com/SwiCago/HeatPump) Arduino libary to talk to the unit directly via the internal J105 header.
 * NOTE: REQUIRES SEVERAL FIXES - SEE https://github.com/SwiCago/HeatPump/pull/155
 
+## Supported Microcontrollers
+This library should work on most ESP8266 or ESP32 platforms. It has been tested with the following:
+* Generic ESP-01S board (ESP8266)
+* WeMos D1 Mini (ESP8266)
+* Generic ESP32 Dev Kit (ESP32)
+
+## Supported Mitsubishi Climate Units
+The underlying HeatPump library works with a number of Mitsubishi HeatPump units. Basically, if the unit has a J105 header on the main board, it should work with this library.
+
+The whole integration with this libary and the underlying HeatPump has been
+tested by the author on the following units:
+* MSZ-GL06NA
+* MFZ-KA09NA
+
 ## Usage
 ### Build a control circuit as detailed in the SwiCago/HeatPump README.
-You can use either an ESP8266 or an ESP32.
+You can use either an ESP8266 or an ESP32 for this.
 
 ### Clone this repository into your ESPHome configuration directory
 
@@ -42,11 +56,28 @@ Create an ESPHome YAML configuration with the following sections:
 
 ```yaml
 esphome:
+  name: denheatpump
+  platform: ESP8266
+  board: esp01_1m
+  # Boards tested: ESP-01S (ESP8266), Wemos D1 Mini (ESP8266); ESP32 Wifi-DevKit2
+
   libraries:
-  #- SwiCago/HeatPump
-  - https://github.com/geoffdavis/HeatPump#init_fix
+    #- SwiCago/HeatPump
+    - https://github.com/geoffdavis/HeatPump#init_fix
+
   includes:
-  - src/esphome-mitsubishiheatpump
+    - src/esphome-mitsubishiheatpump
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Denheatpump Fallback Hotspot"
+    password: !secret fallback_password
+
+captive_portal:
 
 # Enable logging
 logger:
@@ -54,6 +85,46 @@ logger:
   # needs the sole hardware UART on the ESP8266
   baud_rate: 0
 
+# Enable Home Assistant API
+api:
+
+ota:
+
+# Enable Web server.
+web_server:
+  port: 80
+
+  # Sync time with Home Assistant.
+time:
+  - platform: homeassistant
+    id: homeassistant_time
+
+# Text sensors with general information.
+text_sensor:
+  # Expose ESPHome version as sensor.
+  - platform: version
+    name: denheatpump ESPHome Version
+  # Expose WiFi information as sensors.
+  - platform: wifi_info
+    ip_address:
+      name: denheatpump IP
+    ssid:
+      name: denheatpump SSID
+    bssid:
+      name: denheatpump BSSID
+
+# Sensors with general information.
+sensor:
+  # Uptime sensor.
+  - platform: uptime
+    name: denheatpump Uptime
+
+  # WiFi Signal sensor.
+  - platform: wifi_signal
+    name: denheatpump WiFi Signal
+    update_interval: 60s
+
+
 climate:
   - platform: custom
     # ESP32 only - change &Serial to &Serial1 or &Serial2 and remove the
@@ -64,5 +135,23 @@ climate:
       App.register_component(my_heatpump);
       return {my_heatpump};
     climates:
-      - name: "Den Mini-Split Heat Pump"
+      - name: "Den Heat Pump"
 ```
+
+# See Also
+
+The [gysmo38/mitsubishi2MQTT](https://github.com/gysmo38/mitsubishi2MQTT)
+  Arduino sketch also uses the `SwiCago/HeatPump`
+library, and works with MQTT directly. I found it's WiFi stack to not be
+particularly robust, but the controls worked fine. Like this ESPHome
+repository, it will automatically register the device in your HomeAssistant
+instance if you have HA configured to do so.
+
+There's also the built-in to ESPHome [Mitsubishi]
+(https://github.com/esphome/esphome/blob/dev/esphome/components/mitsubishi/mitsubishi.h)
+climate component. It's only in the `dev` branch at the moment (2020-03-11).
+The big drawback with the built-in component is that it uses Infrared Remote
+commands to talk to the Heat Pump. By contrast, the approach used by this
+repository and it's underlying `HeatPump` library allows bi-directional
+communication with the Mitsubishi system, and can detect when someone changes
+the settings via an IR remote.