# esphome-mitsubishiheatpump

Wirelessly control your Mitsubishi Comfort HVAC equipment with an ESP8266 or
ESP32 using the [ESPHome](https://esphome.io) framework.

## Features
* Instant feedback of command changes via RF Remote to HomeAssistant or MQTT.
* Direct control without the remote.
* Uses the [SwiCago/HeatPump](https://github.com/SwiCago/HeatPump) Arduino
  libary to talk to the unit directly via the internal `CN105` connector.
  NOTE: REQUIRES SEVERAL FIXES - SEE [PR
  #155](https://github.com/SwiCago/HeatPump/pull/155)

## Supported Microcontrollers
This library should work on most ESP8266 or ESP32 platforms. It has been tested
with the following MCUs:
* Generic ESP-01S board (ESP8266)
* WeMos D1 Mini (ESP8266)
* Generic ESP32 Dev Kit (ESP32)

## Supported Mitsubishi Climate Units
The underlying HeatPump library works with a number of Mitsubishi HVAC
units. Basically, if the unit has a `CN105` header on the main board, it should
work with this library. The [HeatPump
wiki](https://github.com/SwiCago/HeatPump/wiki/Supported-models) has a more
exhaustive list.

The same `CN105` connector is used by the Mitsubishi KumoCloud remotes, which
have a
[compatibility list](https://www.mitsubishicomfort.com/kumocloud/compatibility)
available.

The whole integration with this libary and the underlying HeatPump has been
tested by the author on the following units:
* `MSZ-GL06NA`
* `MFZ-KA09NA`

## Usage
### Step 1: Build a control circuit.

Build a control circuit with your MCU as detailed in the [SwiCago/HeatPump
 README](https://github.com/SwiCago/HeatPump/blob/master/README.md).
You can use either an ESP8266 or an ESP32 for this.

Note: several users have reported that they've been able to get away with
not using the pull-up resistors, and just [directly connecting a Wemos D1 mini
to the control
board](https://github.com/SwiCago/HeatPump/issues/13#issuecomment-457897457)
via CN105.

### Step 2: Clone this repository into your ESPHome configuration directory

This repository needs to live in your ESPHome configuration directory, as it
doesn't work correctly when used as a Platform.IO library, and there doesn't
seem to be an analog for that functionality for ESPHome code.

On Hass.IO, you'll want to do something like:

* Change directories to your esphome configuration directory.
* `mkdir -p src`
* `cd src`
* `git clone https://github.com/geoffdavis/esphome-mitsubishiheatpump.git`

### Step 3: Configure your ESPHome device with YAML

Create an ESPHome YAML configuration with the following sections:
 * `esphome: libraries: [https://github.com/geoffdavis/HeatPump#init_fix]`
 * `esphome: includes: [src/esphome-mitsubishiheatpump]`
 * `climate:` - set up a custom climate entry, change the Serial port as needed.
 * ESP8266 only: `logger: baud_rate: 0` - disable serial port logging on the
   sole ESP8266 hardware UART

The custom climate definition should use `platform: custom` and contain a
`lambda` block, where you instanciate an instance of the MitsubishiHeatPump
class, and then register it with ESPHome. It should allso contain a "climates"
entry. On ESP32 you
can change `&Serial` to `&Serial1` or `&Serial2` and re-enable logging to the
main serial port.

If that's all greek to you, here's an example. Change "My Heat Pump" to
whatever you want.

```yaml
climate:
  - platform: custom
    lambda: |-
      auto my_heatpump = new MitsubishiHeatPump(&Serial);
      App.register_component(my_heatpump);
      return {my_heatpump};
    climates:
      - name: "My Heat Pump"
```

Note: this component DOES NOT use the ESPHome `uart` component, as it requires
direct access to a hardware UART via the Arduino `HardwareSerial` class. The
Mitsubishi Heatpump units use an atypical serial port setting ("even parity").
Parity bit support is not implemented in any of the existing software serial
libraries, including the one in ESPHome. There's currently no way to guarantee
access to a hardware UART nor retrieve the `HardwareSerial` handle from the
`uart` component within the ESPHome framework.

# Example configuration

Below is an example configuration which will include wireless strength
indicators and permit over the air updates. You'll need to create a
`secrets.yaml` file inside of your `esphome` directory with entries for the
various items prefixed with `!secret`.

```yaml
esphome:
  name: denheatpump
  platform: ESP8266
  board: esp01_1m
  # Boards tested: ESP-01S (ESP8266), Wemos D1 Mini (ESP8266); ESP32 Wifi-DevKit2

  libraries:
    #- SwiCago/HeatPump
    - https://github.com/geoffdavis/HeatPump#init_fix

  includes:
    - src/esphome-mitsubishiheatpump

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Denheatpump Fallback Hotspot"
    password: !secret fallback_password

captive_portal:

# Enable logging
logger:
  # ESP8266 only - disable serial port logging, as the HeatPump component
  # needs the sole hardware UART on the ESP8266
  baud_rate: 0

# Enable Home Assistant API
api:

ota:

# Enable Web server.
web_server:
  port: 80

  # Sync time with Home Assistant.
time:
  - platform: homeassistant
    id: homeassistant_time

# Text sensors with general information.
text_sensor:
  # Expose ESPHome version as sensor.
  - platform: version
    name: denheatpump ESPHome Version
  # Expose WiFi information as sensors.
  - platform: wifi_info
    ip_address:
      name: denheatpump IP
    ssid:
      name: denheatpump SSID
    bssid:
      name: denheatpump BSSID

# Sensors with general information.
sensor:
  # Uptime sensor.
  - platform: uptime
    name: denheatpump Uptime

  # WiFi Signal sensor.
  - platform: wifi_signal
    name: denheatpump WiFi Signal
    update_interval: 60s


climate:
  - platform: custom
    # ESP32 only - change &Serial to &Serial1 or &Serial2 and remove the
    # logging:baud_rate above to allow the built-in UART0 to function for
    # logging.
    lambda: |-
      auto my_heatpump = new MitsubishiHeatPump(&Serial);
      App.register_component(my_heatpump);
      return {my_heatpump};
    climates:
      - name: "Den Heat Pump"
```

# See Also

## Other Implementations
The [gysmo38/mitsubishi2MQTT](https://github.com/gysmo38/mitsubishi2MQTT)
  Arduino sketch also uses the `SwiCago/HeatPump`
library, and works with MQTT directly. I found it's WiFi stack to not be
particularly robust, but the controls worked fine. Like this ESPHome
repository, it will automatically register the device in your HomeAssistant
instance if you have HA configured to do so.

There's also the built-in to ESPHome
[Mitsubishi](https://github.com/esphome/esphome/blob/dev/esphome/components/mitsubishi/mitsubishi.h)
climate component. It's only in the `dev` branch at the moment (2020-03-11).
The big drawback with the built-in component is that it uses Infrared Remote
commands to talk to the Heat Pump. By contrast, the approach used by this
repository and it's underlying `HeatPump` library allows bi-directional
communication with the Mitsubishi system, and can detect when someone changes
the settings via an IR remote.

## Reference documentation

The author referred to the following documentation repeatedly:
* https://esphome.io/components/sensor/custom.html
* https://esphome.io/components/climate/custom.html
* Source for ESPHome's Dev branch: https://github.com/esphome/esphome/tree/dev/esphome/components/climate