diff --git a/calibration.html b/calibration.html
index 32c36c0..c9c6408 100644
--- a/calibration.html
+++ b/calibration.html
@@ -461,7 +461,7 @@
         <div class="exp">
             <h2>Retraction Tuning</h2>
             <h5>Aim:</h5>
-            <p>To set the correct parameters concerning retraction during 3D printing, including retraction distance, speed, and extra restart distance.</p>
+            <p>To set the correct parameters concerning retraction during 3D printing, including retraction distance, speed, extra restart distance and z hop.</p>
             <h5>When required:</h5>
             <p>Initial calibration, any time the hot end or extruder is changed, when trying a new type/brand of filament.</p>
             <h5>Tools:</h5>
@@ -474,7 +474,7 @@
             <h5>Special note:</h5>
             <p>Temperature tuning and retraction tuning are related to each other. You could do them in either order, and it may be necessary to tune back and forth to reach an ideal result. A higher nozzle temperature will promote more oozing and stringing, whereas a lower temperature will reduce oozing and stringing.</p>
         </div>
-        <p>Besides hot end temperature, there are three parameters we will be tuning relating to retraction. In the table is a description of each as well as where the setting is found in the most popular slicers.</p>
+        <p>Besides hot end temperature, there are four parameters we will be tuning relating to retraction. In the table is a description of each as well as where the setting is found in the most popular slicers.</p>
         <table>
             <head>
                 <tr>
@@ -503,6 +503,12 @@
                     <td>Extruder > Extra restart distance</td>
                     <td>Printer settings > Extruder 1 > Retraction > Extra length on restart</td>
                 </tr>
+                <tr>
+                    <td>Z hop: The amount the nozzle lifts vertically in mm during a travel (non-extruding) movement. After this movement, the correct Z value is then restored before the filament is unretracted/primed again ready for printing.</td>
+                    <td>Travel > Z hop when retracted</td>
+                    <td>Extruder > Retraction vertical lift</td>
+                    <td>Printer settings > Extruder 1 > Retraction > Lift z</td>
+                </tr>
             </tbody>
         </table>
         <div class="exp">
@@ -511,7 +517,6 @@
                 <li>Retraction acceleration: This will affect whether the retraction speed can actually be reached. The gcode below does not include any changes to what is set on your printer. You can change this with <a href="https://marlinfw.org/docs/gcode/M204.html" target="_blank">M204</a> and the <b>R</b> argument.</li>
                 <li>Slicer settings such as coast: Coast stops extrusion slightly early to assist retraction. This varies from slicer to slicer and isn't always necessary to tune.</li>
                 <li>Linear advance: Linear advance, covered later in this guide, can drastically improve the accuracy of our extrusion. It has a significant impact of retraction (reducing the need), so after configuring linear advance you may need to revisit retraction.</li>
-                <li>Z hop: The amount the nozzle lifts vertically in mm during a travel (non-extruding) movement. this could have potentially minor impact on stringing. The generator below has this fixed at <b>0.4mm</b>.</li>
                 <li>Slicer differences: The gcode generated below was originally sliced by Simplify3D. The settings you establish should translate to your slicer quite well but there may be idiosyncrasies. For instance, Cura measures extra restart distance in volume rather than length.</li>
             </ul>
         </div> 
@@ -564,6 +569,7 @@
                         <th>Retraction distance (mm)</th>
                         <th>Retraction speed</th>
                         <th>Extra restart distance</th>
+                        <th>Z hop</th>
                     </tr>
                 </thead>
                 <tbody>
@@ -575,36 +581,42 @@
                         <td><input type="number" min="0" max="20" name="ret_f1" value="6" step="0.1"></td>
                         <td><input type="number" min="5" max="200" name="ret_f2" value="40" step="1"></td>
                         <td><input type="number" min="-10" max="10" name="ret_f3" value="0" step="0.1"></td>
+                        <td><input type="number" min="0" max="5" name="ret_f5" value="0" step="0.1"></td>
                     </tr>
                     <tr>
                         <td style="text-align: center;">E</td>
                         <td><input type="number" min="0" max="20" name="ret_e1" value="6" step="0.1"></td>
                         <td><input type="number" min="5" max="200" name="ret_e2" value="40" step="1"></td>
                         <td><input type="number" min="-10" max="10" name="ret_e3" value="0" step="0.1"></td>
+                        <td><input type="number" min="0" max="5" name="ret_e5" value="0" step="0.1"></td>
                     </tr>
                     <tr>
                         <td style="text-align: center;">D</td>
                         <td><input type="number" min="0" max="20" name="ret_d1" value="6" step="0.1"></td>
                         <td><input type="number" min="5" max="200" name="ret_d2" value="40" step="1"></td>
                         <td><input type="number" min="-10" max="10" name="ret_d3" value="0" step="0.1"></td>
+                        <td><input type="number" min="0" max="5" name="ret_d5" value="0" step="0.1"></td>
                     </tr>
                     <tr>
                         <td style="text-align: center;">C</td>
                         <td><input type="number" min="0" max="20" name="ret_c1" value="6" step="0.1"></td>
                         <td><input type="number" min="5" max="200" name="ret_c2" value="40" step="1"></td>
                         <td><input type="number" min="-10" max="10" name="ret_c3" value="0" step="0.1"></td>
+                        <td><input type="number" min="0" max="5" name="ret_c5" value="0" step="0.1"></td>
                     </tr>
                     <tr>
                         <td style="text-align: center;">B</td>
                         <td><input type="number" min="0" max="20" name="ret_b1" value="6" step="0.1"></td>
                         <td><input type="number" min="5" max="200" name="ret_b2" value="40" step="1"></td>
                         <td><input type="number" min="-10" max="10" name="ret_b3" value="0" step="0.1"></td>
+                        <td><input type="number" min="0" max="5" name="ret_b5" value="0" step="0.1"></td>
                     </tr>
                     <tr>
                         <td style="text-align: center;">A</td>
                         <td><input type="number" min="0" max="20" name="ret_a1" value="6" step="0.1"></td>
                         <td><input type="number" min="5" max="200" name="ret_a2" value="40" step="1"></td>
                         <td><input type="number" min="-10" max="10" name="ret_a3" value="0" step="0.1"></td>
+                        <td><input type="number" min="0" max="5" name="ret_a5" value="0" step="0.1"></td>
                     </tr>
                 </tbody>
             </table>
diff --git a/js/gcodeprocessing.js b/js/gcodeprocessing.js
index c9d3411..476a2e1 100644
--- a/js/gcodeprocessing.js
+++ b/js/gcodeprocessing.js
@@ -186,21 +186,27 @@ function processRetraction(){
     var a1 = document.retractionForm.ret_a1.value;
     var a2 = document.retractionForm.ret_a2.value*60;
     var a3 = document.retractionForm.ret_a3.value;
+    var a5 = document.retractionForm.ret_a5.value;
     var b1 = document.retractionForm.ret_b1.value;
     var b2 = document.retractionForm.ret_b2.value*60;
     var b3 = document.retractionForm.ret_b3.value;
+    var b5 = document.retractionForm.ret_b5.value;
     var c1 = document.retractionForm.ret_c1.value;
     var c2 = document.retractionForm.ret_c2.value*60;
     var c3 = document.retractionForm.ret_c3.value;
+    var c5 = document.retractionForm.ret_c5.value;
     var d1 = document.retractionForm.ret_d1.value;
     var d2 = document.retractionForm.ret_d2.value*60;
     var d3 = document.retractionForm.ret_d3.value;
+    var d5 = document.retractionForm.ret_d5.value;
     var e1 = document.retractionForm.ret_e1.value;
     var e2 = document.retractionForm.ret_e2.value*60;
     var e3 = document.retractionForm.ret_e3.value;
+    var e5 = document.retractionForm.ret_e5.value;
     var f1 = document.retractionForm.ret_f1.value;
     var f2 = document.retractionForm.ret_f2.value*60;
     var f3 = document.retractionForm.ret_f3.value;
+    var f5 = document.retractionForm.ret_f5.value;
     var customStart = document.retractionForm.startgcode.value;
     var retraction = originalRetraction;
     if(pc == 1){
@@ -281,23 +287,41 @@ function processRetraction(){
     // A section
     retraction = retraction.replace(/;retractionA/g, "G1 E-"+a1+" F"+a2+" ; custom retraction - A");
     retraction = retraction.replace(/;unretractionA/g, "G1 E"+a3+" F"+a2+" ; custom un-retraction/prime - A");
+    if(a5 > 0){
+        retraction = retraction.replace(/;zhopupA/g, "G91\nG1 Z"+a5+" F1200 ; custom z hop - A\nG90");
+    }
     // B section
     retraction = retraction.replace(/;retractionB/g, "G1 E-"+b1+" F"+b2+" ; custom retraction - B");
     retraction = retraction.replace(/;unretractionB/g, "G1 E"+b3+" F"+b2+" ; custom un-retraction/prime - B");
+    if(b5 > 0){
+        retraction = retraction.replace(/;zhopupB/g, "G91\nG1 Z"+b5+" F1200 ; custom z hop - B\nG90");
+    }
     // C section
     retraction = retraction.replace(/;retractionC/g, "G1 E-"+c1+" F"+c2+" ; custom retraction - C");
     retraction = retraction.replace(/;unretractionC/g, "G1 E"+c3+" F"+c2+" ; custom un-retraction/prime - C");
+    if(c5 > 0){
+        retraction = retraction.replace(/;zhopupC/g, "G91\nG1 Z"+c5+" F1200 ; custom z hop - C\nG90");
+    }
     // D section
     retraction = retraction.replace(/;retractionD/g, "G1 E-"+d1+" F"+d2+" ; custom retraction - D");
     retraction = retraction.replace(/;unretractionD/g, "G1 E"+d3+" F"+d2+" ; custom un-retraction/prime - D");
+    if(d5 > 0){
+        retraction = retraction.replace(/;zhopupD/g, "G91\nG1 Z"+d5+" F1200 ; custom z hop - D\nG90");
+    }
     // E section
     retraction = retraction.replace(/;retractionE/g, "G1 E-"+e1+" F"+e2+" ; custom retraction - E");
     retraction = retraction.replace(/;unretractionE/g, "G1 E"+e3+" F"+e2+" ; custom un-retraction/prime - E");
+    if(e5 > 0){
+        retraction = retraction.replace(/;zhopupE/g, "G91\nG1 Z"+e5+" F1200 ; custom z hop - E\nG90");
+    }
     // F section
     retraction = retraction.replace(/;retractionF/g, "G1 E-"+f1+" F"+f2+" ; custom retraction - F");
     retraction = retraction.replace(/;unretractionF/g, "G1 E"+f3+" F"+f2+" ; custom un-retraction/prime - F");
     if(document.retractionForm.start.checked == true) {
         retraction = retraction.replace(/;customstart/, "; custom start gcode\n"+customStart);
+        if(f5 > 0){
+            retraction = retraction.replace(/;zhopupF/g, "G91\nG1 Z"+f5+" F1200 ; custom z hop - F\nG90");
+        }
     }
     downloadFile('retraction.gcode', retraction);
 }
diff --git a/js/retraction.js b/js/retraction.js
index 3cb0416..267cdeb 100644
--- a/js/retraction.js
+++ b/js/retraction.js
@@ -17,7 +17,7 @@ G92 E0.0000
 ;retractionA
 ; feature skirt
 ; tool H0.200 W0.576
-;zhopup
+;zhopupA
 G1 X18.872 Y37.041 F6000
 G1 Z0.200 F1200
 ;unretractionA
@@ -152,7 +152,7 @@ G1 X18.178 Y37.394 E7.9827
 G1 X18.872 Y37.041 E8.0162
 G92 E0.0000
 ;retractionA
-;zhopup
+;zhopupA
 G1 X19.120 Y37.561 F6000
 G1 Z0.200 F1200
 ;unretractionA
@@ -288,7 +288,7 @@ G1 X19.120 Y37.561 E7.8602
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X21.084 Y41.696 F6000
 G1 X21.063 Y41.706
 G1 X21.553 Y42.750
@@ -696,7 +696,7 @@ G92 E0.0000
 M106 S255
 ; feature inner perimeter
 ; tool H0.200 W0.480
-;zhopup
+;zhopupA
 G1 X78.174 Y42.388 F6000
 G1 Z0.400 F1200
 ;unretractionA
@@ -1133,7 +1133,7 @@ G92 E0.0000
 ;retractionA
 ; layer 3, Z = 0.600
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X19.388 Y44.826 F6000
 G1 Z0.600 F1200
 ;unretractionA
@@ -1576,7 +1576,7 @@ G92 E0.0000
 ;retractionA
 ; layer 4, Z = 0.800
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X78.174 Y42.388 F6000
 G1 Z0.800 F1200
 ;unretractionA
@@ -1830,7 +1830,7 @@ G92 E0.0000
 ; layer 5, Z = 1.000
 ; feature inner perimeter
 ; tool H0.200 W0.480
-;zhopup
+;zhopupA
 G1 X19.200 Y46.031 F6000
 G1 Z1.000 F1200
 ;unretractionA
@@ -2064,7 +2064,7 @@ G92 E0.0000
 ; layer 6, Z = 1.200
 ; feature inner perimeter
 ; tool H0.200 W0.480
-;zhopup
+;zhopupA
 G1 X76.969 Y42.200 F6000
 G1 Z1.200 F1200
 ;unretractionA
@@ -2318,7 +2318,7 @@ G92 E0.0000
 ; layer 7, Z = 1.400
 ; feature inner perimeter
 ; tool H0.200 W0.480
-;zhopup
+;zhopupA
 G1 X19.200 Y46.031 F6000
 G1 Z1.400 F1200
 ;unretractionA
@@ -2851,7 +2851,7 @@ G92 E0.0000
 ;retractionA
 ; layer 8, Z = 1.600
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X76.969 Y57.800 F6000
 G1 Z1.600 F1200
 ;unretractionA
@@ -3381,7 +3381,7 @@ G92 E0.0000
 ;retractionA
 ; layer 9, Z = 1.800
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X80.800 Y53.969 F6000
 G1 Z1.800 F1200
 ;unretractionA
@@ -3914,7 +3914,7 @@ G92 E0.0000
 ;retractionA
 ; layer 10, Z = 2.000
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X23.031 Y42.200 F6000
 G1 Z2.000 F1200
 ;unretractionA
@@ -4443,7 +4443,7 @@ G92 E0.0000
 ;retractionA
 ; layer 11, Z = 2.200
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X74.251 Y46.298 F6000
 G1 Z2.200 F1200
 ;unretractionA
@@ -4630,7 +4630,7 @@ G1 X73.994 Y45.372 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X73.608 Y45.502 F6000
 G1 X73.239 Y45.672
 G1 X72.890 Y45.882
@@ -4832,7 +4832,7 @@ G92 E0.0000
 ;retractionA
 ; layer 12, Z = 2.400
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.782 Y48.692 F6000
 G1 Z2.400 F1200
 ;unretractionA
@@ -5019,7 +5019,7 @@ G1 X28.738 Y48.588 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X28.760 Y48.994 F6000
 G1 X71.240 Y48.994
 G1 X71.241 Y48.985
@@ -5210,7 +5210,7 @@ G92 E0.0000
 ;retractionA
 ; layer 13, Z = 2.600
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z2.600 F1200
 ;unretractionA
@@ -5397,7 +5397,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z2.600 F1200
 ;unretractionA
@@ -5585,7 +5585,7 @@ G92 E0.0000
 ;retractionA
 ; layer 14, Z = 2.800
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z2.800 F1200
 ;unretractionA
@@ -5772,7 +5772,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z2.800 F1200
 ;unretractionA
@@ -5960,7 +5960,7 @@ G92 E0.0000
 ;retractionA
 ; layer 15, Z = 3.000
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z3.000 F1200
 ;unretractionA
@@ -6147,7 +6147,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z3.000 F1200
 ;unretractionA
@@ -6335,7 +6335,7 @@ G92 E0.0000
 ;retractionA
 ; layer 16, Z = 3.200
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z3.200 F1200
 ;unretractionA
@@ -6522,7 +6522,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z3.200 F1200
 ;unretractionA
@@ -6710,7 +6710,7 @@ G92 E0.0000
 ;retractionA
 ; layer 17, Z = 3.400
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z3.400 F1200
 ;unretractionA
@@ -6897,7 +6897,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z3.400 F1200
 ;unretractionA
@@ -7085,7 +7085,7 @@ G92 E0.0000
 ;retractionA
 ; layer 18, Z = 3.600
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z3.600 F1200
 ;unretractionA
@@ -7272,7 +7272,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z3.600 F1200
 ;unretractionA
@@ -7460,7 +7460,7 @@ G92 E0.0000
 ;retractionA
 ; layer 19, Z = 3.800
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z3.800 F1200
 ;unretractionA
@@ -7647,7 +7647,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z3.800 F1200
 ;unretractionA
@@ -7835,7 +7835,7 @@ G92 E0.0000
 ;retractionA
 ; layer 20, Z = 4.000
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z4.000 F1200
 ;unretractionA
@@ -8022,7 +8022,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z4.000 F1200
 ;unretractionA
@@ -8210,7 +8210,7 @@ G92 E0.0000
 ;retractionA
 ; layer 21, Z = 4.200
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z4.200 F1200
 ;unretractionA
@@ -8397,7 +8397,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z4.200 F1200
 ;unretractionA
@@ -8585,7 +8585,7 @@ G92 E0.0000
 ;retractionA
 ; layer 22, Z = 4.400
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z4.400 F1200
 ;unretractionA
@@ -8772,7 +8772,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z4.400 F1200
 ;unretractionA
@@ -8960,7 +8960,7 @@ G92 E0.0000
 ;retractionA
 ; layer 23, Z = 4.600
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z4.600 F1200
 ;unretractionA
@@ -9147,7 +9147,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z4.600 F1200
 ;unretractionA
@@ -9335,7 +9335,7 @@ G92 E0.0000
 ;retractionA
 ; layer 24, Z = 4.800
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z4.800 F1200
 ;unretractionA
@@ -9522,7 +9522,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z4.800 F1200
 ;unretractionA
@@ -9710,7 +9710,7 @@ G92 E0.0000
 ;retractionA
 ; layer 25, Z = 5.000
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z5.000 F1200
 ;unretractionA
@@ -9897,7 +9897,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z5.000 F1200
 ;unretractionA
@@ -10085,7 +10085,7 @@ G92 E0.0000
 ;retractionA
 ; layer 26, Z = 5.200
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z5.200 F1200
 ;unretractionA
@@ -10272,7 +10272,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z5.200 F1200
 ;unretractionA
@@ -10460,7 +10460,7 @@ G92 E0.0000
 ;retractionA
 ; layer 27, Z = 5.400
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z5.400 F1200
 ;unretractionA
@@ -10647,7 +10647,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z5.400 F1200
 ;unretractionA
@@ -10835,7 +10835,7 @@ G92 E0.0000
 ;retractionA
 ; layer 28, Z = 5.600
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z5.600 F1200
 ;unretractionA
@@ -11022,7 +11022,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z5.600 F1200
 ;unretractionA
@@ -11210,7 +11210,7 @@ G92 E0.0000
 ;retractionA
 ; layer 29, Z = 5.800
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z5.800 F1200
 ;unretractionA
@@ -11397,7 +11397,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z5.800 F1200
 ;unretractionA
@@ -11585,7 +11585,7 @@ G92 E0.0000
 ;retractionA
 ; layer 30, Z = 6.000
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z6.000 F1200
 ;unretractionA
@@ -11772,7 +11772,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z6.000 F1200
 ;unretractionA
@@ -11960,7 +11960,7 @@ G92 E0.0000
 ;retractionA
 ; layer 31, Z = 6.200
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z6.200 F1200
 ;unretractionA
@@ -12147,7 +12147,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z6.200 F1200
 ;unretractionA
@@ -12335,7 +12335,7 @@ G92 E0.0000
 ;retractionA
 ; layer 32, Z = 6.400
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z6.400 F1200
 ;unretractionA
@@ -12522,7 +12522,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z6.400 F1200
 ;unretractionA
@@ -12710,7 +12710,7 @@ G92 E0.0000
 ;retractionA
 ; layer 33, Z = 6.600
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z6.600 F1200
 ;unretractionA
@@ -12897,7 +12897,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z6.600 F1200
 ;unretractionA
@@ -13085,7 +13085,7 @@ G92 E0.0000
 ;retractionA
 ; layer 34, Z = 6.800
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z6.800 F1200
 ;unretractionA
@@ -13272,7 +13272,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z6.800 F1200
 ;unretractionA
@@ -13460,7 +13460,7 @@ G92 E0.0000
 ;retractionA
 ; layer 35, Z = 7.000
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z7.000 F1200
 ;unretractionA
@@ -13647,7 +13647,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z7.000 F1200
 ;unretractionA
@@ -13835,7 +13835,7 @@ G92 E0.0000
 ;retractionA
 ; layer 36, Z = 7.200
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z7.200 F1200
 ;unretractionA
@@ -14022,7 +14022,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z7.200 F1200
 ;unretractionA
@@ -14210,7 +14210,7 @@ G92 E0.0000
 ;retractionA
 ; layer 37, Z = 7.400
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z7.400 F1200
 ;unretractionA
@@ -14397,7 +14397,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z7.400 F1200
 ;unretractionA
@@ -14585,7 +14585,7 @@ G92 E0.0000
 ;retractionA
 ; layer 38, Z = 7.600
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z7.600 F1200
 ;unretractionA
@@ -14772,7 +14772,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z7.600 F1200
 ;unretractionA
@@ -14960,7 +14960,7 @@ G92 E0.0000
 ;retractionA
 ; layer 39, Z = 7.800
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z7.800 F1200
 ;unretractionA
@@ -15147,7 +15147,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z7.800 F1200
 ;unretractionA
@@ -15335,7 +15335,7 @@ G92 E0.0000
 ;retractionA
 ; layer 40, Z = 8.000
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X27.798 Y48.994 F6000
 G1 Z8.000 F1200
 ;unretractionA
@@ -15522,7 +15522,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionA
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.202 Y48.994 F6000
 G1 Z8.000 F1200
 ;unretractionA
@@ -15711,7 +15711,7 @@ G92 E0.0000
 ; process Color1-3
 ; layer 41, Z = 8.200
 ; feature inner perimeter
-;zhopup
+;zhopupA
 G1 X72.602 Y48.994 F6000
 G1 Z8.200 F1200
 ;unretractionA
@@ -15898,7 +15898,7 @@ G1 X71.640 Y48.994 E0.7579
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.398 Y48.994 F6000
 G1 Z8.200 F1200
 ;unretractionB
@@ -16086,7 +16086,7 @@ G92 E0.0000
 ;retractionB
 ; layer 42, Z = 8.400
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.598 Y48.994 F6000
 G1 Z8.400 F1200
 ;unretractionB
@@ -16282,7 +16282,7 @@ G1 X28.560 Y48.994 E0.8030
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.402 Y48.994 F6000
 G1 Z8.400 F1200
 ;unretractionB
@@ -16476,7 +16476,7 @@ G92 E0.0000
 ;retractionB
 ; layer 43, Z = 8.600
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z8.600 F1200
 ;unretractionB
@@ -16663,7 +16663,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z8.600 F1200
 ;unretractionB
@@ -16851,7 +16851,7 @@ G92 E0.0000
 ;retractionB
 ; layer 44, Z = 8.800
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z8.800 F1200
 ;unretractionB
@@ -17038,7 +17038,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z8.800 F1200
 ;unretractionB
@@ -17226,7 +17226,7 @@ G92 E0.0000
 ;retractionB
 ; layer 45, Z = 9.000
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z9.000 F1200
 ;unretractionB
@@ -17413,7 +17413,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z9.000 F1200
 ;unretractionB
@@ -17601,7 +17601,7 @@ G92 E0.0000
 ;retractionB
 ; layer 46, Z = 9.200
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z9.200 F1200
 ;unretractionB
@@ -17788,7 +17788,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z9.200 F1200
 ;unretractionB
@@ -17976,7 +17976,7 @@ G92 E0.0000
 ;retractionB
 ; layer 47, Z = 9.400
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z9.400 F1200
 ;unretractionB
@@ -18163,7 +18163,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z9.400 F1200
 ;unretractionB
@@ -18351,7 +18351,7 @@ G92 E0.0000
 ;retractionB
 ; layer 48, Z = 9.600
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z9.600 F1200
 ;unretractionB
@@ -18538,7 +18538,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z9.600 F1200
 ;unretractionB
@@ -18726,7 +18726,7 @@ G92 E0.0000
 ;retractionB
 ; layer 49, Z = 9.800
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z9.800 F1200
 ;unretractionB
@@ -18913,7 +18913,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z9.800 F1200
 ;unretractionB
@@ -19101,7 +19101,7 @@ G92 E0.0000
 ;retractionB
 ; layer 50, Z = 10.000
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z10.000 F1200
 ;unretractionB
@@ -19288,7 +19288,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z10.000 F1200
 ;unretractionB
@@ -19476,7 +19476,7 @@ G92 E0.0000
 ;retractionB
 ; layer 51, Z = 10.200
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z10.200 F1200
 ;unretractionB
@@ -19663,7 +19663,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z10.200 F1200
 ;unretractionB
@@ -19851,7 +19851,7 @@ G92 E0.0000
 ;retractionB
 ; layer 52, Z = 10.400
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z10.400 F1200
 ;unretractionB
@@ -20038,7 +20038,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z10.400 F1200
 ;unretractionB
@@ -20226,7 +20226,7 @@ G92 E0.0000
 ;retractionB
 ; layer 53, Z = 10.600
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z10.600 F1200
 ;unretractionB
@@ -20413,7 +20413,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z10.600 F1200
 ;unretractionB
@@ -20601,7 +20601,7 @@ G92 E0.0000
 ;retractionB
 ; layer 54, Z = 10.800
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z10.800 F1200
 ;unretractionB
@@ -20788,7 +20788,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z10.800 F1200
 ;unretractionB
@@ -20976,7 +20976,7 @@ G92 E0.0000
 ;retractionB
 ; layer 55, Z = 11.000
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z11.000 F1200
 ;unretractionB
@@ -21163,7 +21163,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z11.000 F1200
 ;unretractionB
@@ -21351,7 +21351,7 @@ G92 E0.0000
 ;retractionB
 ; layer 56, Z = 11.200
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z11.200 F1200
 ;unretractionB
@@ -21538,7 +21538,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z11.200 F1200
 ;unretractionB
@@ -21726,7 +21726,7 @@ G92 E0.0000
 ;retractionB
 ; layer 57, Z = 11.400
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z11.400 F1200
 ;unretractionB
@@ -21913,7 +21913,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z11.400 F1200
 ;unretractionB
@@ -22101,7 +22101,7 @@ G92 E0.0000
 ;retractionB
 ; layer 58, Z = 11.600
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z11.600 F1200
 ;unretractionB
@@ -22288,7 +22288,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z11.600 F1200
 ;unretractionB
@@ -22476,7 +22476,7 @@ G92 E0.0000
 ;retractionB
 ; layer 59, Z = 11.800
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z11.800 F1200
 ;unretractionB
@@ -22663,7 +22663,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z11.800 F1200
 ;unretractionB
@@ -22851,7 +22851,7 @@ G92 E0.0000
 ;retractionB
 ; layer 60, Z = 12.000
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z12.000 F1200
 ;unretractionB
@@ -23038,7 +23038,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z12.000 F1200
 ;unretractionB
@@ -23226,7 +23226,7 @@ G92 E0.0000
 ;retractionB
 ; layer 61, Z = 12.200
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z12.200 F1200
 ;unretractionB
@@ -23413,7 +23413,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z12.200 F1200
 ;unretractionB
@@ -23601,7 +23601,7 @@ G92 E0.0000
 ;retractionB
 ; layer 62, Z = 12.400
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z12.400 F1200
 ;unretractionB
@@ -23788,7 +23788,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z12.400 F1200
 ;unretractionB
@@ -23976,7 +23976,7 @@ G92 E0.0000
 ;retractionB
 ; layer 63, Z = 12.600
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z12.600 F1200
 ;unretractionB
@@ -24163,7 +24163,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z12.600 F1200
 ;unretractionB
@@ -24351,7 +24351,7 @@ G92 E0.0000
 ;retractionB
 ; layer 64, Z = 12.800
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z12.800 F1200
 ;unretractionB
@@ -24538,7 +24538,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z12.800 F1200
 ;unretractionB
@@ -24726,7 +24726,7 @@ G92 E0.0000
 ;retractionB
 ; layer 65, Z = 13.000
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z13.000 F1200
 ;unretractionB
@@ -24913,7 +24913,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z13.000 F1200
 ;unretractionB
@@ -25101,7 +25101,7 @@ G92 E0.0000
 ;retractionB
 ; layer 66, Z = 13.200
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z13.200 F1200
 ;unretractionB
@@ -25288,7 +25288,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z13.200 F1200
 ;unretractionB
@@ -25476,7 +25476,7 @@ G92 E0.0000
 ;retractionB
 ; layer 67, Z = 13.400
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z13.400 F1200
 ;unretractionB
@@ -25663,7 +25663,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z13.400 F1200
 ;unretractionB
@@ -25851,7 +25851,7 @@ G92 E0.0000
 ;retractionB
 ; layer 68, Z = 13.600
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z13.600 F1200
 ;unretractionB
@@ -26038,7 +26038,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z13.600 F1200
 ;unretractionB
@@ -26226,7 +26226,7 @@ G92 E0.0000
 ;retractionB
 ; layer 69, Z = 13.800
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z13.800 F1200
 ;unretractionB
@@ -26413,7 +26413,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z13.800 F1200
 ;unretractionB
@@ -26601,7 +26601,7 @@ G92 E0.0000
 ;retractionB
 ; layer 70, Z = 14.000
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X27.798 Y48.994 F6000
 G1 Z14.000 F1200
 ;unretractionB
@@ -26788,7 +26788,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionB
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.202 Y48.994 F6000
 G1 Z14.000 F1200
 ;unretractionB
@@ -26977,7 +26977,7 @@ G92 E0.0000
 ; process Color1-4
 ; layer 71, Z = 14.200
 ; feature inner perimeter
-;zhopup
+;zhopupB
 G1 X72.602 Y48.994 F6000
 G1 Z14.200 F1200
 ;unretractionB
@@ -27164,7 +27164,7 @@ G1 X71.640 Y48.994 E0.7579
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.398 Y48.994 F6000
 G1 Z14.200 F1200
 ;unretractionC
@@ -27352,7 +27352,7 @@ G92 E0.0000
 ;retractionC
 ; layer 72, Z = 14.400
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.598 Y48.994 F6000
 G1 Z14.400 F1200
 ;unretractionC
@@ -27548,7 +27548,7 @@ G1 X28.560 Y48.994 E0.8030
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.402 Y48.994 F6000
 G1 Z14.400 F1200
 ;unretractionC
@@ -27742,7 +27742,7 @@ G92 E0.0000
 ;retractionC
 ; layer 73, Z = 14.600
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z14.600 F1200
 ;unretractionC
@@ -27929,7 +27929,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z14.600 F1200
 ;unretractionC
@@ -28117,7 +28117,7 @@ G92 E0.0000
 ;retractionC
 ; layer 74, Z = 14.800
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z14.800 F1200
 ;unretractionC
@@ -28304,7 +28304,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z14.800 F1200
 ;unretractionC
@@ -28492,7 +28492,7 @@ G92 E0.0000
 ;retractionC
 ; layer 75, Z = 15.000
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z15.000 F1200
 ;unretractionC
@@ -28679,7 +28679,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z15.000 F1200
 ;unretractionC
@@ -28867,7 +28867,7 @@ G92 E0.0000
 ;retractionC
 ; layer 76, Z = 15.200
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z15.200 F1200
 ;unretractionC
@@ -29054,7 +29054,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z15.200 F1200
 ;unretractionC
@@ -29242,7 +29242,7 @@ G92 E0.0000
 ;retractionC
 ; layer 77, Z = 15.400
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z15.400 F1200
 ;unretractionC
@@ -29429,7 +29429,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z15.400 F1200
 ;unretractionC
@@ -29617,7 +29617,7 @@ G92 E0.0000
 ;retractionC
 ; layer 78, Z = 15.600
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z15.600 F1200
 ;unretractionC
@@ -29804,7 +29804,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z15.600 F1200
 ;unretractionC
@@ -29992,7 +29992,7 @@ G92 E0.0000
 ;retractionC
 ; layer 79, Z = 15.800
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z15.800 F1200
 ;unretractionC
@@ -30179,7 +30179,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z15.800 F1200
 ;unretractionC
@@ -30367,7 +30367,7 @@ G92 E0.0000
 ;retractionC
 ; layer 80, Z = 16.000
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z16.000 F1200
 ;unretractionC
@@ -30554,7 +30554,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z16.000 F1200
 ;unretractionC
@@ -30742,7 +30742,7 @@ G92 E0.0000
 ;retractionC
 ; layer 81, Z = 16.200
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z16.200 F1200
 ;unretractionC
@@ -30929,7 +30929,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z16.200 F1200
 ;unretractionC
@@ -31117,7 +31117,7 @@ G92 E0.0000
 ;retractionC
 ; layer 82, Z = 16.400
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z16.400 F1200
 ;unretractionC
@@ -31304,7 +31304,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z16.400 F1200
 ;unretractionC
@@ -31492,7 +31492,7 @@ G92 E0.0000
 ;retractionC
 ; layer 83, Z = 16.600
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z16.600 F1200
 ;unretractionC
@@ -31679,7 +31679,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z16.600 F1200
 ;unretractionC
@@ -31867,7 +31867,7 @@ G92 E0.0000
 ;retractionC
 ; layer 84, Z = 16.800
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z16.800 F1200
 ;unretractionC
@@ -32054,7 +32054,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z16.800 F1200
 ;unretractionC
@@ -32242,7 +32242,7 @@ G92 E0.0000
 ;retractionC
 ; layer 85, Z = 17.000
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z17.000 F1200
 ;unretractionC
@@ -32429,7 +32429,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z17.000 F1200
 ;unretractionC
@@ -32617,7 +32617,7 @@ G92 E0.0000
 ;retractionC
 ; layer 86, Z = 17.200
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z17.200 F1200
 ;unretractionC
@@ -32804,7 +32804,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z17.200 F1200
 ;unretractionC
@@ -32992,7 +32992,7 @@ G92 E0.0000
 ;retractionC
 ; layer 87, Z = 17.400
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z17.400 F1200
 ;unretractionC
@@ -33179,7 +33179,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z17.400 F1200
 ;unretractionC
@@ -33367,7 +33367,7 @@ G92 E0.0000
 ;retractionC
 ; layer 88, Z = 17.600
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z17.600 F1200
 ;unretractionC
@@ -33554,7 +33554,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z17.600 F1200
 ;unretractionC
@@ -33742,7 +33742,7 @@ G92 E0.0000
 ;retractionC
 ; layer 89, Z = 17.800
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z17.800 F1200
 ;unretractionC
@@ -33929,7 +33929,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z17.800 F1200
 ;unretractionC
@@ -34117,7 +34117,7 @@ G92 E0.0000
 ;retractionC
 ; layer 90, Z = 18.000
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z18.000 F1200
 ;unretractionC
@@ -34304,7 +34304,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z18.000 F1200
 ;unretractionC
@@ -34492,7 +34492,7 @@ G92 E0.0000
 ;retractionC
 ; layer 91, Z = 18.200
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z18.200 F1200
 ;unretractionC
@@ -34679,7 +34679,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z18.200 F1200
 ;unretractionC
@@ -34867,7 +34867,7 @@ G92 E0.0000
 ;retractionC
 ; layer 92, Z = 18.400
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z18.400 F1200
 ;unretractionC
@@ -35054,7 +35054,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z18.400 F1200
 ;unretractionC
@@ -35242,7 +35242,7 @@ G92 E0.0000
 ;retractionC
 ; layer 93, Z = 18.600
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z18.600 F1200
 ;unretractionC
@@ -35429,7 +35429,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z18.600 F1200
 ;unretractionC
@@ -35617,7 +35617,7 @@ G92 E0.0000
 ;retractionC
 ; layer 94, Z = 18.800
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z18.800 F1200
 ;unretractionC
@@ -35804,7 +35804,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z18.800 F1200
 ;unretractionC
@@ -35992,7 +35992,7 @@ G92 E0.0000
 ;retractionC
 ; layer 95, Z = 19.000
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z19.000 F1200
 ;unretractionC
@@ -36179,7 +36179,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z19.000 F1200
 ;unretractionC
@@ -36367,7 +36367,7 @@ G92 E0.0000
 ;retractionC
 ; layer 96, Z = 19.200
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z19.200 F1200
 ;unretractionC
@@ -36554,7 +36554,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z19.200 F1200
 ;unretractionC
@@ -36742,7 +36742,7 @@ G92 E0.0000
 ;retractionC
 ; layer 97, Z = 19.400
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z19.400 F1200
 ;unretractionC
@@ -36929,7 +36929,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z19.400 F1200
 ;unretractionC
@@ -37117,7 +37117,7 @@ G92 E0.0000
 ;retractionC
 ; layer 98, Z = 19.600
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z19.600 F1200
 ;unretractionC
@@ -37304,7 +37304,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z19.600 F1200
 ;unretractionC
@@ -37492,7 +37492,7 @@ G92 E0.0000
 ;retractionC
 ; layer 99, Z = 19.800
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z19.800 F1200
 ;unretractionC
@@ -37679,7 +37679,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z19.800 F1200
 ;unretractionC
@@ -37867,7 +37867,7 @@ G92 E0.0000
 ;retractionC
 ; layer 100, Z = 20.000
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X27.798 Y48.994 F6000
 G1 Z20.000 F1200
 ;unretractionC
@@ -38054,7 +38054,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionC
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.202 Y48.994 F6000
 G1 Z20.000 F1200
 ;unretractionC
@@ -38243,7 +38243,7 @@ G92 E0.0000
 ; process Color1-5
 ; layer 101, Z = 20.200
 ; feature inner perimeter
-;zhopup
+;zhopupC
 G1 X72.602 Y48.994 F6000
 G1 Z20.200 F1200
 ;unretractionC
@@ -38430,7 +38430,7 @@ G1 X71.640 Y48.994 E0.7579
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.398 Y48.994 F6000
 G1 Z20.200 F1200
 ;unretractionD
@@ -38618,7 +38618,7 @@ G92 E0.0000
 ;retractionD
 ; layer 102, Z = 20.400
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.598 Y48.994 F6000
 G1 Z20.400 F1200
 ;unretractionD
@@ -38813,7 +38813,7 @@ G1 X28.560 Y48.994 E0.8030
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.402 Y48.994 F6000
 G1 Z20.400 F1200
 ;unretractionD
@@ -39005,7 +39005,7 @@ G92 E0.0000
 ;retractionD
 ; layer 103, Z = 20.600
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z20.600 F1200
 ;unretractionD
@@ -39192,7 +39192,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z20.600 F1200
 ;unretractionD
@@ -39380,7 +39380,7 @@ G92 E0.0000
 ;retractionD
 ; layer 104, Z = 20.800
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z20.800 F1200
 ;unretractionD
@@ -39567,7 +39567,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z20.800 F1200
 ;unretractionD
@@ -39755,7 +39755,7 @@ G92 E0.0000
 ;retractionD
 ; layer 105, Z = 21.000
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z21.000 F1200
 ;unretractionD
@@ -39942,7 +39942,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z21.000 F1200
 ;unretractionD
@@ -40130,7 +40130,7 @@ G92 E0.0000
 ;retractionD
 ; layer 106, Z = 21.200
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z21.200 F1200
 ;unretractionD
@@ -40317,7 +40317,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z21.200 F1200
 ;unretractionD
@@ -40505,7 +40505,7 @@ G92 E0.0000
 ;retractionD
 ; layer 107, Z = 21.400
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z21.400 F1200
 ;unretractionD
@@ -40692,7 +40692,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z21.400 F1200
 ;unretractionD
@@ -40880,7 +40880,7 @@ G92 E0.0000
 ;retractionD
 ; layer 108, Z = 21.600
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z21.600 F1200
 ;unretractionD
@@ -41067,7 +41067,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z21.600 F1200
 ;unretractionD
@@ -41255,7 +41255,7 @@ G92 E0.0000
 ;retractionD
 ; layer 109, Z = 21.800
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z21.800 F1200
 ;unretractionD
@@ -41442,7 +41442,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z21.800 F1200
 ;unretractionD
@@ -41630,7 +41630,7 @@ G92 E0.0000
 ;retractionD
 ; layer 110, Z = 22.000
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z22.000 F1200
 ;unretractionD
@@ -41817,7 +41817,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z22.000 F1200
 ;unretractionD
@@ -42005,7 +42005,7 @@ G92 E0.0000
 ;retractionD
 ; layer 111, Z = 22.200
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z22.200 F1200
 ;unretractionD
@@ -42192,7 +42192,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z22.200 F1200
 ;unretractionD
@@ -42380,7 +42380,7 @@ G92 E0.0000
 ;retractionD
 ; layer 112, Z = 22.400
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z22.400 F1200
 ;unretractionD
@@ -42567,7 +42567,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z22.400 F1200
 ;unretractionD
@@ -42755,7 +42755,7 @@ G92 E0.0000
 ;retractionD
 ; layer 113, Z = 22.600
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z22.600 F1200
 ;unretractionD
@@ -42942,7 +42942,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z22.600 F1200
 ;unretractionD
@@ -43130,7 +43130,7 @@ G92 E0.0000
 ;retractionD
 ; layer 114, Z = 22.800
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z22.800 F1200
 ;unretractionD
@@ -43317,9 +43317,9 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
-;zhopup
+G1 Z22.800 F1200
 ;unretractionD
 G92 E0.0000
 G1 X72.218 Y48.692 E0.0109 F2700
@@ -43505,7 +43505,7 @@ G92 E0.0000
 ;retractionD
 ; layer 115, Z = 23.000
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z23.000 F1200
 ;unretractionD
@@ -43692,7 +43692,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z23.000 F1200
 ;unretractionD
@@ -43880,7 +43880,7 @@ G92 E0.0000
 ;retractionD
 ; layer 116, Z = 23.200
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z23.200 F1200
 ;unretractionD
@@ -44067,7 +44067,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z23.200 F1200
 ;unretractionD
@@ -44255,7 +44255,7 @@ G92 E0.0000
 ;retractionD
 ; layer 117, Z = 23.400
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z23.400 F1200
 ;unretractionD
@@ -44442,7 +44442,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z23.400 F1200
 ;unretractionD
@@ -44630,7 +44630,7 @@ G92 E0.0000
 ;retractionD
 ; layer 118, Z = 23.600
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z23.600 F1200
 ;unretractionD
@@ -44817,7 +44817,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z23.600 F1200
 ;unretractionD
@@ -45005,7 +45005,7 @@ G92 E0.0000
 ;retractionD
 ; layer 119, Z = 23.800
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z23.800 F1200
 ;unretractionD
@@ -45192,7 +45192,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z23.800 F1200
 ;unretractionD
@@ -45380,7 +45380,7 @@ G92 E0.0000
 ;retractionD
 ; layer 120, Z = 24.000
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z24.000 F1200
 ;unretractionD
@@ -45567,7 +45567,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z24.000 F1200
 ;unretractionD
@@ -45755,7 +45755,7 @@ G92 E0.0000
 ;retractionD
 ; layer 121, Z = 24.200
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z24.200 F1200
 ;unretractionD
@@ -45942,7 +45942,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z24.200 F1200
 ;unretractionD
@@ -46130,7 +46130,7 @@ G92 E0.0000
 ;retractionD
 ; layer 122, Z = 24.400
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z24.400 F1200
 ;unretractionD
@@ -46317,7 +46317,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z24.400 F1200
 ;unretractionD
@@ -46505,7 +46505,7 @@ G92 E0.0000
 ;retractionD
 ; layer 123, Z = 24.600
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z24.600 F1200
 ;unretractionD
@@ -46692,7 +46692,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z24.600 F1200
 ;unretractionD
@@ -46880,7 +46880,7 @@ G92 E0.0000
 ;retractionD
 ; layer 124, Z = 24.800
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z24.800 F1200
 ;unretractionD
@@ -47067,7 +47067,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z24.800 F1200
 ;unretractionD
@@ -47255,7 +47255,7 @@ G92 E0.0000
 ;retractionD
 ; layer 125, Z = 25.000
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z25.000 F1200
 ;unretractionD
@@ -47442,7 +47442,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z25.000 F1200
 ;unretractionD
@@ -47630,7 +47630,7 @@ G92 E0.0000
 ;retractionD
 ; layer 126, Z = 25.200
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z25.200 F1200
 ;unretractionD
@@ -47817,7 +47817,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z25.200 F1200
 ;unretractionD
@@ -48005,7 +48005,7 @@ G92 E0.0000
 ;retractionD
 ; layer 127, Z = 25.400
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z25.400 F1200
 ;unretractionD
@@ -48192,7 +48192,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z25.400 F1200
 ;unretractionD
@@ -48380,7 +48380,7 @@ G92 E0.0000
 ;retractionD
 ; layer 128, Z = 25.600
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z25.600 F1200
 ;unretractionD
@@ -48567,7 +48567,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z25.600 F1200
 ;unretractionD
@@ -48755,7 +48755,7 @@ G92 E0.0000
 ;retractionD
 ; layer 129, Z = 25.800
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z25.800 F1200
 ;unretractionD
@@ -48942,7 +48942,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z25.800 F1200
 ;unretractionD
@@ -49130,7 +49130,7 @@ G92 E0.0000
 ;retractionD
 ; layer 130, Z = 26.000
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X27.798 Y48.994 F6000
 G1 Z26.000 F1200
 ;unretractionD
@@ -49317,7 +49317,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionD
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.202 Y48.994 F6000
 G1 Z26.000 F1200
 ;unretractionD
@@ -49506,7 +49506,7 @@ G92 E0.0000
 ; process Color1-6
 ; layer 131, Z = 26.200
 ; feature inner perimeter
-;zhopup
+;zhopupD
 G1 X72.602 Y48.994 F6000
 G1 Z26.200 F1200
 ;unretractionD
@@ -49693,7 +49693,7 @@ G1 X71.640 Y48.994 E0.7579
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.398 Y48.994 F6000
 G1 Z26.200 F1200
 ;unretractionE
@@ -49881,7 +49881,7 @@ G92 E0.0000
 ;retractionE
 ; layer 132, Z = 26.400
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.598 Y48.994 F6000
 G1 Z26.400 F1200
 ;unretractionE
@@ -50076,7 +50076,7 @@ G1 X28.560 Y48.994 E0.8030
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.402 Y48.994 F6000
 G1 Z26.400 F1200
 ;unretractionE
@@ -50268,7 +50268,7 @@ G92 E0.0000
 ;retractionE
 ; layer 133, Z = 26.600
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z26.600 F1200
 ;unretractionE
@@ -50455,7 +50455,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z26.600 F1200
 ;unretractionE
@@ -50643,7 +50643,7 @@ G92 E0.0000
 ;retractionE
 ; layer 134, Z = 26.800
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z26.800 F1200
 ;unretractionE
@@ -50830,7 +50830,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z26.800 F1200
 ;unretractionE
@@ -51018,7 +51018,7 @@ G92 E0.0000
 ;retractionE
 ; layer 135, Z = 27.000
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z27.000 F1200
 ;unretractionE
@@ -51205,7 +51205,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z27.000 F1200
 ;unretractionE
@@ -51393,7 +51393,7 @@ G92 E0.0000
 ;retractionE
 ; layer 136, Z = 27.200
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z27.200 F1200
 ;unretractionE
@@ -51580,7 +51580,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z27.200 F1200
 ;unretractionE
@@ -51768,7 +51768,7 @@ G92 E0.0000
 ;retractionE
 ; layer 137, Z = 27.400
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z27.400 F1200
 ;unretractionE
@@ -51955,7 +51955,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z27.400 F1200
 ;unretractionE
@@ -52143,7 +52143,7 @@ G92 E0.0000
 ;retractionE
 ; layer 138, Z = 27.600
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z27.600 F1200
 ;unretractionE
@@ -52330,7 +52330,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z27.600 F1200
 ;unretractionE
@@ -52518,7 +52518,7 @@ G92 E0.0000
 ;retractionE
 ; layer 139, Z = 27.800
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z27.800 F1200
 ;unretractionE
@@ -52705,7 +52705,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z27.800 F1200
 ;unretractionE
@@ -52893,7 +52893,7 @@ G92 E0.0000
 ;retractionE
 ; layer 140, Z = 28.000
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z28.000 F1200
 ;unretractionE
@@ -53080,7 +53080,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z28.000 F1200
 ;unretractionE
@@ -53268,7 +53268,7 @@ G92 E0.0000
 ;retractionE
 ; layer 141, Z = 28.200
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z28.200 F1200
 ;unretractionE
@@ -53455,7 +53455,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z28.200 F1200
 ;unretractionE
@@ -53643,7 +53643,7 @@ G92 E0.0000
 ;retractionE
 ; layer 142, Z = 28.400
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z28.400 F1200
 ;unretractionE
@@ -53830,7 +53830,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z28.400 F1200
 ;unretractionE
@@ -54018,7 +54018,7 @@ G92 E0.0000
 ;retractionE
 ; layer 143, Z = 28.600
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z28.600 F1200
 ;unretractionE
@@ -54205,7 +54205,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z28.600 F1200
 ;unretractionE
@@ -54393,7 +54393,7 @@ G92 E0.0000
 ;retractionE
 ; layer 144, Z = 28.800
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z28.800 F1200
 ;unretractionE
@@ -54580,7 +54580,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z28.800 F1200
 ;unretractionE
@@ -54768,7 +54768,7 @@ G92 E0.0000
 ;retractionE
 ; layer 145, Z = 29.000
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z29.000 F1200
 ;unretractionE
@@ -54955,7 +54955,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z29.000 F1200
 ;unretractionE
@@ -55143,7 +55143,7 @@ G92 E0.0000
 ;retractionE
 ; layer 146, Z = 29.200
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z29.200 F1200
 ;unretractionE
@@ -55330,7 +55330,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z29.200 F1200
 ;unretractionE
@@ -55518,7 +55518,7 @@ G92 E0.0000
 ;retractionE
 ; layer 147, Z = 29.400
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z29.400 F1200
 ;unretractionE
@@ -55705,7 +55705,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z29.400 F1200
 ;unretractionE
@@ -55893,7 +55893,7 @@ G92 E0.0000
 ;retractionE
 ; layer 148, Z = 29.600
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z29.600 F1200
 ;unretractionE
@@ -56080,7 +56080,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z29.600 F1200
 ;unretractionE
@@ -56268,7 +56268,7 @@ G92 E0.0000
 ;retractionE
 ; layer 149, Z = 29.800
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z29.800 F1200
 ;unretractionE
@@ -56455,7 +56455,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z29.800 F1200
 ;unretractionE
@@ -56643,7 +56643,7 @@ G92 E0.0000
 ;retractionE
 ; layer 150, Z = 30.000
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z30.000 F1200
 ;unretractionE
@@ -56830,7 +56830,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z30.000 F1200
 ;unretractionE
@@ -57018,7 +57018,7 @@ G92 E0.0000
 ;retractionE
 ; layer 151, Z = 30.200
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z30.200 F1200
 ;unretractionE
@@ -57205,7 +57205,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z30.200 F1200
 ;unretractionE
@@ -57393,7 +57393,7 @@ G92 E0.0000
 ;retractionE
 ; layer 152, Z = 30.400
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z30.400 F1200
 ;unretractionE
@@ -57580,7 +57580,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z30.400 F1200
 ;unretractionE
@@ -57768,7 +57768,7 @@ G92 E0.0000
 ;retractionE
 ; layer 153, Z = 30.600
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z30.600 F1200
 ;unretractionE
@@ -57955,7 +57955,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z30.600 F1200
 ;unretractionE
@@ -58143,7 +58143,7 @@ G92 E0.0000
 ;retractionE
 ; layer 154, Z = 30.800
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z30.800 F1200
 ;unretractionE
@@ -58330,7 +58330,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z30.800 F1200
 ;unretractionE
@@ -58518,7 +58518,7 @@ G92 E0.0000
 ;retractionE
 ; layer 155, Z = 31.000
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z31.000 F1200
 ;unretractionE
@@ -58705,7 +58705,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z31.000 F1200
 ;unretractionE
@@ -58893,7 +58893,7 @@ G92 E0.0000
 ;retractionE
 ; layer 156, Z = 31.200
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z31.200 F1200
 ;unretractionE
@@ -59080,7 +59080,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z31.200 F1200
 ;unretractionE
@@ -59268,7 +59268,7 @@ G92 E0.0000
 ;retractionE
 ; layer 157, Z = 31.400
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z31.400 F1200
 ;unretractionE
@@ -59455,7 +59455,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z31.400 F1200
 ;unretractionE
@@ -59643,7 +59643,7 @@ G92 E0.0000
 ;retractionE
 ; layer 158, Z = 31.600
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z31.600 F1200
 ;unretractionE
@@ -59830,7 +59830,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z31.600 F1200
 ;unretractionE
@@ -60018,7 +60018,7 @@ G92 E0.0000
 ;retractionE
 ; layer 159, Z = 31.800
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z31.800 F1200
 ;unretractionE
@@ -60205,7 +60205,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z31.800 F1200
 ;unretractionE
@@ -60393,7 +60393,7 @@ G92 E0.0000
 ;retractionE
 ; layer 160, Z = 32.000
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X27.798 Y48.994 F6000
 G1 Z32.000 F1200
 ;unretractionE
@@ -60580,7 +60580,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionE
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.202 Y48.994 F6000
 G1 Z32.000 F1200
 ;unretractionE
@@ -60769,7 +60769,7 @@ G92 E0.0000
 ; process Color1-7
 ; layer 161, Z = 32.200
 ; feature inner perimeter
-;zhopup
+;zhopupE
 G1 X72.602 Y48.994 F6000
 G1 Z32.200 F1200
 ;unretractionE
@@ -60956,7 +60956,7 @@ G1 X71.640 Y48.994 E0.7579
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.398 Y48.994 F6000
 G1 Z32.200 F1200
 ;unretractionF
@@ -61144,7 +61144,7 @@ G92 E0.0000
 ;retractionF
 ; layer 162, Z = 32.400
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.598 Y48.994 F6000
 G1 Z32.400 F1200
 ;unretractionF
@@ -61339,7 +61339,7 @@ G1 X28.560 Y48.994 E0.8030
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.402 Y48.994 F6000
 G1 Z32.400 F1200
 ;unretractionF
@@ -61531,7 +61531,7 @@ G92 E0.0000
 ;retractionF
 ; layer 163, Z = 32.600
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z32.600 F1200
 ;unretractionF
@@ -61718,7 +61718,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z32.600 F1200
 ;unretractionF
@@ -61906,7 +61906,7 @@ G92 E0.0000
 ;retractionF
 ; layer 164, Z = 32.800
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z32.800 F1200
 ;unretractionF
@@ -62093,7 +62093,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z32.800 F1200
 ;unretractionF
@@ -62281,7 +62281,7 @@ G92 E0.0000
 ;retractionF
 ; layer 165, Z = 33.000
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z33.000 F1200
 ;unretractionF
@@ -62468,7 +62468,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z33.000 F1200
 ;unretractionF
@@ -62656,7 +62656,7 @@ G92 E0.0000
 ;retractionF
 ; layer 166, Z = 33.200
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z33.200 F1200
 ;unretractionF
@@ -62843,7 +62843,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z33.200 F1200
 ;unretractionF
@@ -63031,7 +63031,7 @@ G92 E0.0000
 ;retractionF
 ; layer 167, Z = 33.400
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z33.400 F1200
 ;unretractionF
@@ -63218,7 +63218,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z33.400 F1200
 ;unretractionF
@@ -63406,7 +63406,7 @@ G92 E0.0000
 ;retractionF
 ; layer 168, Z = 33.600
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z33.600 F1200
 ;unretractionF
@@ -63593,7 +63593,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z33.600 F1200
 ;unretractionF
@@ -63781,7 +63781,7 @@ G92 E0.0000
 ;retractionF
 ; layer 169, Z = 33.800
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z33.800 F1200
 ;unretractionF
@@ -63968,7 +63968,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z33.800 F1200
 ;unretractionF
@@ -64156,7 +64156,7 @@ G92 E0.0000
 ;retractionF
 ; layer 170, Z = 34.000
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z34.000 F1200
 ;unretractionF
@@ -64343,7 +64343,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z34.000 F1200
 ;unretractionF
@@ -64531,7 +64531,7 @@ G92 E0.0000
 ;retractionF
 ; layer 171, Z = 34.200
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z34.200 F1200
 ;unretractionF
@@ -64718,7 +64718,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z34.200 F1200
 ;unretractionF
@@ -64906,7 +64906,7 @@ G92 E0.0000
 ;retractionF
 ; layer 172, Z = 34.400
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z34.400 F1200
 ;unretractionF
@@ -65093,7 +65093,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z34.400 F1200
 ;unretractionF
@@ -65281,7 +65281,7 @@ G92 E0.0000
 ;retractionF
 ; layer 173, Z = 34.600
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z34.600 F1200
 ;unretractionF
@@ -65468,7 +65468,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z34.600 F1200
 ;unretractionF
@@ -65656,7 +65656,7 @@ G92 E0.0000
 ;retractionF
 ; layer 174, Z = 34.800
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z34.800 F1200
 ;unretractionF
@@ -65843,7 +65843,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z34.800 F1200
 ;unretractionF
@@ -66031,7 +66031,7 @@ G92 E0.0000
 ;retractionF
 ; layer 175, Z = 35.000
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z35.000 F1200
 ;unretractionF
@@ -66218,7 +66218,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z35.000 F1200
 ;unretractionF
@@ -66406,7 +66406,7 @@ G92 E0.0000
 ;retractionF
 ; layer 176, Z = 35.200
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z35.200 F1200
 ;unretractionF
@@ -66593,7 +66593,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z35.200 F1200
 ;unretractionF
@@ -66781,7 +66781,7 @@ G92 E0.0000
 ;retractionF
 ; layer 177, Z = 35.400
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z35.400 F1200
 ;unretractionF
@@ -66968,7 +66968,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z35.400 F1200
 ;unretractionF
@@ -67156,7 +67156,7 @@ G92 E0.0000
 ;retractionF
 ; layer 178, Z = 35.600
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z35.600 F1200
 ;unretractionF
@@ -67343,7 +67343,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z35.600 F1200
 ;unretractionF
@@ -67531,7 +67531,7 @@ G92 E0.0000
 ;retractionF
 ; layer 179, Z = 35.800
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z35.800 F1200
 ;unretractionF
@@ -67718,7 +67718,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z35.800 F1200
 ;unretractionF
@@ -67906,7 +67906,7 @@ G92 E0.0000
 ;retractionF
 ; layer 180, Z = 36.000
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z36.000 F1200
 ;unretractionF
@@ -68093,7 +68093,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z36.000 F1200
 ;unretractionF
@@ -68281,7 +68281,7 @@ G92 E0.0000
 ;retractionF
 ; layer 181, Z = 36.200
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z36.200 F1200
 ;unretractionF
@@ -68468,7 +68468,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z36.200 F1200
 ;unretractionF
@@ -68656,7 +68656,7 @@ G92 E0.0000
 ;retractionF
 ; layer 182, Z = 36.400
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z36.400 F1200
 ;unretractionF
@@ -68843,7 +68843,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z36.400 F1200
 ;unretractionF
@@ -69031,7 +69031,7 @@ G92 E0.0000
 ;retractionF
 ; layer 183, Z = 36.600
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z36.600 F1200
 ;unretractionF
@@ -69218,7 +69218,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z36.600 F1200
 ;unretractionF
@@ -69406,7 +69406,7 @@ G92 E0.0000
 ;retractionF
 ; layer 184, Z = 36.800
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z36.800 F1200
 ;unretractionF
@@ -69593,7 +69593,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z36.800 F1200
 ;unretractionF
@@ -69781,7 +69781,7 @@ G92 E0.0000
 ;retractionF
 ; layer 185, Z = 37.000
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z37.000 F1200
 ;unretractionF
@@ -69968,7 +69968,7 @@ G1 X71.240 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z37.000 F1200
 ;unretractionF
@@ -70156,7 +70156,7 @@ G92 E0.0000
 ;retractionF
 ; layer 186, Z = 37.200
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.798 Y48.994 F6000
 G1 Z37.200 F1200
 ;unretractionF
@@ -70343,7 +70343,7 @@ G1 X28.760 Y48.994 E0.8481
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z37.200 F1200
 ;unretractionF
@@ -70531,7 +70531,7 @@ G92 E0.0000
 ;retractionF
 ; layer 187, Z = 37.400
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X72.202 Y48.994 F6000
 G1 Z37.400 F1200
 ;unretractionF
@@ -70760,7 +70760,7 @@ G1 X75.813 Y46.624 E1.6551
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X71.942 Y46.815 F6000
 G1 X71.779 Y47.056
 G1 X71.588 Y47.416
@@ -70998,7 +70998,7 @@ G92 E0.0000
 ;retractionF
 ; layer 188, Z = 37.600
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X22.348 Y49.888 F6000
 G1 Z37.600 F1200
 ;unretractionF
@@ -71225,7 +71225,7 @@ G1 X25.461 Y51.459 E1.6552
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.943 Y51.328 F6000
 G1 X27.993 Y51.269
 G1 X28.221 Y50.932
@@ -71464,7 +71464,7 @@ G92 E0.0000
 ;retractionF
 ; layer 189, Z = 37.800
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X75.749 Y51.690 F6000
 G1 Z37.800 F1200
 ;unretractionF
@@ -71693,7 +71693,7 @@ G1 X75.813 Y46.624 E1.6551
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X71.942 Y46.815 F6000
 G1 X71.779 Y47.056
 G1 X71.588 Y47.416
@@ -71931,7 +71931,7 @@ G92 E0.0000
 ;retractionF
 ; layer 190, Z = 38.000
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X22.348 Y49.888 F6000
 G1 Z38.000 F1200
 ;unretractionF
@@ -72158,7 +72158,7 @@ G1 X25.461 Y51.459 E1.6552
 G92 E0.0000
 ;retractionF
 ; feature inner perimeter
-;zhopup
+;zhopupF
 G1 X27.943 Y51.328 F6000
 G1 X27.993 Y51.269
 G1 X28.221 Y50.932

Extruder > Extra restart distance	Printer settings > Extruder 1 > Retraction > Extra length on restart
Z hop: The amount the nozzle lifts vertically in mm during a travel (non-extruding) movement. After this movement, the correct Z value is then restored before the filament is unretracted/primed again ready for printing.	Travel > Z hop when retracted	Extruder > Retraction vertical lift	Printer settings > Extruder 1 > Retraction > Lift z