From 4c2468862fff414615c0bbb981d85f7771db26e5 Mon Sep 17 00:00:00 2001 From: lawgicau Date: Tue, 13 Jul 2021 10:44:20 +1000 Subject: [PATCH] Add slot 1 note for UBL #155 --- calibration.html | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/calibration.html b/calibration.html index 18de19d..55a3088 100644 --- a/calibration.html +++ b/calibration.html @@ -216,7 +216,7 @@ - +

Retraction

If you don't know what to enter here, you can leave the retraction speed at 40 mm/sec. For a bowden tube printer, 6mm is a likely retraction distance. For direct drive, a starting value of 1mm may be suitable. If you are not sure about extra restart distance, leave this as 0.

@@ -303,7 +303,7 @@ - +

Retraction

If you don't know what to enter here, you can leave the retraction speed at 40 mm/sec. For a bowden tube printer, 6mm is a likely retraction distance. For direct drive, a starting value of 1mm may be suitable. If you are not sure about extra restart distance, leave this as 0.

@@ -758,7 +758,7 @@ - +

Retraction

For initial tests, you can leave the retraction speed at 40 mm/sec. For a bowden tube printer, 6mm is a likely retraction distance. For direct drive, a starting value of 1mm may be suitable. Vary either side of this for each segment.

@@ -916,7 +916,7 @@ - +

Retraction

If you don't know what to enter here, you can leave the retraction speed at 40 mm/sec. For a bowden tube printer, 6mm is a likely retraction distance. For direct drive, a starting value of 1mm may be suitable. If you are not sure about extra restart distance, leave this as 0.

@@ -1117,7 +1117,7 @@ - +

Retraction

For initial tests, you can leave the retraction speed at 40 mm/sec. For a bowden tube printer, 6mm is a likely retraction distance. For direct drive, a starting value of 1mm may be suitable. If you are following this guide in order, you should already know your ideal retraction values.