diff --git a/calibration.html b/calibration.html
index 033c141..315bfeb 100644
--- a/calibration.html
+++ b/calibration.html
@@ -41,8 +41,7 @@
                 <li>1.75mm filament (However <b>M221 S38</b> for 2.85 mm filament and <b>M221 S34</b> for 3.0 mm filament can be applied in the custom start gcode field as compensation)</b></li>
                 <li>0.2mm layer height</li>
                 <li>0.4mm nozzle</li>
-                <li>Base feedrate of 60mm/sec</li>
-                <li>0.2 - 0.4mm of Z hop</li>
+                <li>Base feedrate of 60mm/sec, 50% for perimeters, 80% for solid infill, 50% first layer.</li>
                 <li>Nozzle priming has been turned off to avoid bed clips or problems with deltas</li>
                 <li>A single layer skirt (except on the acceleration test)</li>
             </ul>