From 7889839e3db7117d86a93b09fd7a5a357299182d Mon Sep 17 00:00:00 2001
From: lawgicau <lawgicau@gmail.com>
Date: Thu, 15 Jul 2021 17:57:50 +1000
Subject: [PATCH] Adjust retraction tower parameters

20% infill for base, hollow after that.
z seam to centre of model.
---
 calibration.html | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/calibration.html b/calibration.html
index eeaf777..76e951a 100644
--- a/calibration.html
+++ b/calibration.html
@@ -102,12 +102,14 @@
             <p>Baseline test: No changes</p>
             <p>Retraction test:</p>
             <ul>
+                <li>Z seam alignment set to 50, 50 mm</li>
                 <li>'Process-1' from 0mm</li>
-                <li>'Process-2' from 5mm - 5.5 mm retraction at 41 mm/sec</li>
-                <li>'Process-3' from 10mm - 6.0 mm retraction at 42 mm/sec</li>
-                <li>'Process-4' from 15mm - 6.5 mm retraction at 43 mm/sec</li>
-                <li>'Process-5' from 20mm - 7.0 mm retraction at 44 mm/sec</li>
-                <li>'Process-6' from 25mm - 7.5 mm retraction at 45 mm/sec</li>
+                <li>'Process-2' from 2mm</li>
+                <li>'Process-3' from 5mm - 5.5 mm retraction at 41 mm/sec - 0% infill</li>
+                <li>'Process-4' from 10mm - 6.0 mm retraction at 42 mm/sec - 0% infill</li>
+                <li>'Process-5' from 15mm - 6.5 mm retraction at 43 mm/sec - 0% infill</li>
+                <li>'Process-6' from 20mm - 7.0 mm retraction at 44 mm/sec - 0% infill</li>
+                <li>'Process-7' from 25mm - 7.5 mm retraction at 45 mm/sec - 0% infill</li>
             </ul>
             <p>Temperature test:</p>
             <ul>