diff --git a/calibration.html b/calibration.html
index 49a8803..69addd0 100644
--- a/calibration.html
+++ b/calibration.html
@@ -54,7 +54,7 @@
                 <li>Defaut feedrate of 60mm/sec. Modifiers include 60% for perimeters, 80% for solid infill, 166% travel moves, and 50% for the first layer</li>
                 <li>Travel moves of 20 mm/sec for Z</li>
                 <li>Flow rate of 0.90. Please see the note on the bottom of the <a href="calibration.html#flow" target="_blank">flow</a> tab for instructions on adapting this to your printer.</li>
-                <li>Nozzle priming has been turned off to avoid bed clips or problems with delta printers. Use the custom start gcode feature to insert the priming dequence from your slicer profile.</li>
+                <li>Nozzle priming has been turned off to avoid bed clips or problems with delta printers. Use the custom start gcode feature to insert the priming sequence from your slicer profile.</li>
                 <li>A single layer skirt (except on the acceleration test)</li>
                 <li>100% part cooling fan for bridging</li>
                 <li>First layer height of 100%, width 120%</li>