From aa4b3826ca194a112f61a9c20992c1ca46740aef Mon Sep 17 00:00:00 2001
From: lawgicau <lawgicau@gmail.com>
Date: Thu, 10 Sep 2020 12:37:56 +1000
Subject: [PATCH] Add G90 instruction at the end of max extrusion speed test

---
 calibration.html | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/calibration.html b/calibration.html
index 025e982..7769e5f 100644
--- a/calibration.html
+++ b/calibration.html
@@ -1002,7 +1002,8 @@
             <pre>G1 E50 F300</pre>
             <pre>G1 E50 F360</pre>
             <pre>...</pre>
-            <li>After you find the limiting speed, back off and repeat the test at a lower feedrate several times in a row until you are confident of reliable and repeatable extrusion.</li>
+            <li>After you find the limiting speed, back off and repeat the test at a lower feedrate several times in a row until you are confident of reliable and repeatable extrusion. <br />Don't forget to put the printer back into absolute movement mode:</li>
+            <pre>G90</pre>
             <li>Enter your reliable feedrate and filament diameter below:</li>
             <label>Reliable feedrate: <input type="number" min="60" max="1000" name="maxFeed" value="180" step="10" onchange="maxExt(); maxFee();"></label>
             <label>Filament diameter: <input type="number" min="1.5" max="4" name="filDia" value="1.75" step="0.05" onchange="maxExt(); maxFee();"></label>