From bf177e177da42617dcfbb149b4d3f5c1ffa59712 Mon Sep 17 00:00:00 2001 From: teachingtechYT Date: Tue, 16 Nov 2021 09:03:44 +1100 Subject: [PATCH] Add 0.15mm nozzle at 0.08mm layer height tests #374 --- calibration.html | 2 +- js/acceleration.js | 18798 +++++++++ js/baseline.js | 37644 +++++++++++++++++ js/createform.js | 1 + js/firstlayer.js | 375 + js/retraction.js | 39588 ++++++++++++++++++ js/speed.js | 89712 ++++++++++++++++++++++++++++++++++++++++ js/temperature.js | 94987 +++++++++++++++++++++++++++++++++++++++++++ 8 files changed, 281106 insertions(+), 1 deletion(-) diff --git a/calibration.html b/calibration.html index b1119cb..c6d465d 100644 --- a/calibration.html +++ b/calibration.html @@ -123,7 +123,7 @@ M84 ; disable motors {REPLACE "G1 E0.0000 F2700\n" ";unretract6\n"}

Changes made per test to the base slicing profile

The information below is mainly for my reference. However, if you wish to duplicate the tests yourself out of interest or perhaps to develop a new test for the site, then the steps must be followed exactly, including replicating the process names.

-

First layer test: No changes, although it should be noted that a single square is included which is then duplicated and positioned by this site. Non uniform scaling of the source STL needs to occur to suit certain nozzle/layer combinations. THe square should be 25 x 25 mm with it's height scaled to match the target layer height.

+

First layer test: No changes, although it should be noted that a single square is included which is then duplicated and positioned by this site. Non uniform scaling of the source STL needs to occur to suit certain nozzle/layer combinations. The square should be 25 x 25 mm with it's height scaled to match the target layer height.

Baseline test: No changes

Retraction test: