diff --git a/calibration.html b/calibration.html
index b1c866c..729d389 100644
--- a/calibration.html
+++ b/calibration.html
@@ -187,7 +187,7 @@
                     <li><b>M221 S38</b> can also be used to compensate for 2.85 mm filament and <b>M221 S34</b> for 3.00 mm filament instead of the default 1.75 mm.</li>
                     <li>Setting the K factor for linear advance. For example, <b>M900 K0.11</b></li>
                     <li>Custom ABL sequence. By default, only G28 is present. This gcode will be inserted immediately afer that so custom commands can be used here.</li>
-                    <li>Anythng else you have in your start gcode, such as setting acceleration values, E-steps, etc.</li>
+                    <li>Anything else you have in your start gcode, such as setting acceleration values, E-steps, etc.</li>
                 </ul>
                 <textarea name="startgcode"></textarea>
             </div>
@@ -291,7 +291,7 @@
                     <li><b>M221 S38</b> can also be used to compensate for 2.85 mm filament and <b>M221 S34</b> for 3.00 mm filament instead of the default 1.75 mm.</li>
                     <li>Setting the K factor for linear advance. For example, <b>M900 K0.11</b></li>
                     <li>Custom ABL sequence. By default, only G28 is present. This gcode will be inserted immediately afer that so custom commands can be used here.</li>
-                    <li>Anythng else you have in your start gcode, such as setting acceleration values, E-steps, etc.</li>
+                    <li>Anything else you have in your start gcode, such as setting acceleration values, E-steps, etc.</li>
                 </ul>
                 <textarea name="startgcode"></textarea>
             </div>
@@ -483,7 +483,7 @@
 
                 <tr>
                     <td>6. Set flow rate to default: 1.0 / 100%</td>
-                    <td>Material > Flow: 100</td>
+                    <td>Material > Flow: 100 & Material > Initial Flow: 100 (first layer flow)</td>
                     <td>Extruder > Extrusion multiplier: 1.0</td>
                     <td>Filament settings > Filament > Extrusion multiplier: 1</td>
                 </tr>
@@ -943,7 +943,7 @@
                     <li><b>M221 S38</b> can also be used to compensate for 2.85 mm filament and <b>M221 S34</b> for 3.00 mm filament instead of the default 1.75 mm.</li>
                     <li>Setting the K factor for linear advance. For example, <b>M900 K0.11</b></li>
                     <li>Custom ABL sequence. By default, only G28 is present. This gcode will be inserted immediately afer that so custom commands can be used here.</li>
-                    <li>Anythng else you have in your start gcode, such as setting acceleration values, E-steps, etc.</li>
+                    <li>Anything else you have in your start gcode, such as setting acceleration values, E-steps, etc.</li>
                 </ul>
                 <textarea name="startgcode"></textarea>
             </div>
@@ -1156,7 +1156,7 @@
                     <li><b>M221 S38</b> can also be used to compensate for 2.85 mm filament and <b>M221 S34</b> for 3.00 mm filament instead of the default 1.75 mm.</li>
                     <li>Setting the K factor for linear advance. For example, <b>M900 K0.11</b></li>
                     <li>Custom ABL sequence. By default, only G28 is present. This gcode will be inserted immediately afer that so custom commands can be used here.</li>
-                    <li>Anythng else you have in your start gcode, such as setting acceleration values, E-steps, etc.</li>
+                    <li>Anything else you have in your start gcode, such as setting acceleration values, E-steps, etc.</li>
                 </ul>
                 <textarea name="startgcode"></textarea>
             </div>