From 6c3fabe812d68b21c48fca3f7765197e8714335b Mon Sep 17 00:00:00 2001
From: Jason E Rush <jason@jason-rush.com>
Date: Wed, 28 Jul 2021 08:49:25 -0800
Subject: [PATCH] calibration.html typo (dequence to sequence)

---
 calibration.html | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/calibration.html b/calibration.html
index 2dea588..ebad870 100644
--- a/calibration.html
+++ b/calibration.html
@@ -53,7 +53,7 @@
                 <li>Defaut feedrate of 60mm/sec. Modifiers include 60% for perimeters, 80% for solid infill, 166% travel moves, and 50% for the first layer</li>
                 <li>Travel moves of 20 mm/sec for Z</li>
                 <li>Flow rate of 0.90. Please see the note on the bottom of the <a href="calibration.html#flow" target="_blank">flow</a> tab for instructions on adapting this to your printer.</li>
-                <li>Nozzle priming has been turned off to avoid bed clips or problems with delta printers. Use the custom start gcode feature to insert the priming dequence from your slicer profile.</li>
+                <li>Nozzle priming has been turned off to avoid bed clips or problems with delta printers. Use the custom start gcode feature to insert the priming sequence from your slicer profile.</li>
                 <li>A single layer skirt (except on the acceleration test)</li>
                 <li>100% part cooling fan for bridging</li>
                 <li>First layer height of 100%, width 120%</li>