#!/bin/sh

mkdir -p /opt/cni
ln -s /mnt/data/podman/cni/ /opt/cni/bin
ln -s /mnt/data/podman/cni/20-dns.conflist  /etc/cni/net.d/20-dns.conflist

# Assumes your Podman network made in the controller is on VLAN 5
# Adjust the IP to match the address in your cni configuration
ip link add br5.mac link br5 type macvlan mode bridge
ip addr add 10.0.5.2/24 dev br5.mac
ip link set br5.mac up
ip route add 10.0.5.3/32 dev br5.mac proto static scope link
podman start pihole

#Adjust these rules to your setup
iptables -t nat -C PREROUTING -i br0 -p udp ! --source 10.0.5.3 ! --destination 10.0.5.3 --dport 53 -j DNAT --to 10.0.5.3 || iptables -t nat -A PREROUTING -i br0 -p udp ! --source 10.0.5.3 ! --destination 10.0.5.3 --dport 53 -j DNAT --to 10.0.5.3
iptables -t nat -C PREROUTING -i br10 -p udp ! --source 10.0.5.3 ! --destination 10.0.5.3 --dport 53 -j DNAT --to 10.0.5.3 || iptables -t nat -A PREROUTING -i br10 -p udp ! --source 10.0.5.3 ! --destination 10.0.5.3 --dport 53 -j DNAT --to 10.0.5.3
iptables -t nat -C PREROUTING -i br0 -p tcp ! --source 10.0.5.3 ! --destination 10.0.5.3 --dport 53 -j DNAT --to 10.0.5.3 || iptables -t nat -A PREROUTING -i br0 -p tcp ! --source 10.0.5.3 ! --destination 10.0.5.3 --dport 53 -j DNAT --to 10.0.5.3
iptables -t nat -C PREROUTING -i br10 -p tcp ! --source 10.0.5.3 ! --destination 10.0.5.3 --dport 53 -j DNAT --to 10.0.5.3 || iptables -t nat -A PREROUTING -i br10 -p tcp ! --source 10.0.5.3 ! --destination 10.0.5.3 --dport 53 -j DNAT --to 10.0.5.3