# Run Pi-hole on your UDM

## Features

1. Run Pi-hole on your UDM with a completely isolated network stack.  This will not port conflict or be influenced by any changes on by Ubiquiti
2. Persists through reboots and firmware updates.

## Requirements

1. You have successfully setup the on boot script described [here](https://github.com/boostchicken/udm-utilities/tree/master/on-boot-script)

## Customization

* Feel free to change [20-dns.conflist](../cni-plugins/20-dns.conflist) to change the IP address and MAC address of the container.
* Update [10-dns.sh](../dns-common/on_boot.d/10-dns.sh) with your own values
* If you want IPv6 support use [20-dnsipv6.conflist](../cni-plugins/20-dnsipv6.conflist) and update [10-dns.sh](../dns-common/on_boot.d/10-dns.sh) with the IPv6 addresses. Also, please provide IPv6 servers to podman using --dns arguments.

## Steps

1. Copy [05-install-cni-plugins.sh](../cni-plugins/05-install-cni-plugins.sh) to /mnt/data/on_boot.d
1. Execute /mnt/data/on_boot.d/05-install-cni-plugins.sh
1. On your controller, make a Corporate network with no DHCP server and give it a VLAN. For this example we are using VLAN 5.
1. Copy [20-dns.conflist](../cni-plugins/20-dns.conflist) to /mnt/data/podman/cni.  This will create your podman macvlan network
1. Copy [10-dns.sh](../dns-common/on_boot.d/10-dns.sh) to /mnt/data/on_boot.d and update its values to reflect your environment

   ```
   ...
   VLAN=5
   IPV4_IP="10.0.5.3"
   IPV4_GW="10.0.5.1/24"
   ...
   CONTAINER=pihole
   ...
   ```   

1. Execute /mnt/data/on_boot.d/10-dns.sh
1. Create directories for persistent Pi-hole configuration

   ```
   mkdir -p /mnt/data/etc-pihole
   mkdir -p /mnt/data/pihole/etc-dnsmasq.d
   ```
   
1. Create and run the Pi-hole docker container. The following command sets the upstream DNS servers to 1.1.1.1 and 8.8.8.8.

    ```sh
     podman run -d --network dns --restart always \
        --name pihole \
        -e TZ="America/Los Angeles" \
        -v "/mnt/data/etc-pihole/:/etc/pihole/" \
        -v "/mnt/data/pihole/etc-dnsmasq.d/:/etc/dnsmasq.d/" \
        --dns=127.0.0.1 \
        --dns=1.1.1.1 \
        --dns=8.8.8.8 \
        --hostname pi.hole \
        -e VIRTUAL_HOST="pi.hole" \
        -e PROXY_LOCATION="pi.hole" \
        -e ServerIP="10.0.5.3" \
        -e IPv6="False" \
        pihole/pihole:latest
    ```
      The below errors are expected and acceptable
      
          ```sh
          ERRO[0022] unable to get systemd connection to add healthchecks: dial unix /run/systemd/private: connect: no such file or directory
          ERRO[0022] unable to get systemd connection to start healthchecks: dial unix /run/systemd/private: connect: no such file or directory
          ```

1. Set pihole password

    ```sh
    podman exec -it pihole pihole -a -p YOURNEWPASSHERE
    ```

1. Update your DNS Servers to 10.0.5.3 (or your custom ip) for each of your Networks (UDM GUI | Networks | Advanced | DHCP Name Server)
1. Access the pihole like you would normally, e.g. http://10.0.5.3 if using examples above

## PiHole with CloudFlareD Command
    ```sh
     podman run -d --network dns --restart always \
        --name pihole \
        -e TZ="America/Los Angeles" \
        -v "/mnt/data/etc-pihole/:/etc/pihole/" \
        -v "/mnt/data/pihole/etc-dnsmasq.d/:/etc/dnsmasq.d/" \
        --dns=127.0.0.1 \
        --dns=1.1.1.1 \
        --hostname pi.hole \
        -e CLOUDFLARED_OPTS="--port 5053 --address 0.0.0.0" \
        -e VIRTUAL_HOST="pi.hole" \
        -e PROXY_LOCATION="pi.hole" \
        -e ServerIP="10.0.5.3" \
        -e PIHOLE_DNS_="127.0.0.1#5053" \
        -e IPv6="False" \
        boostchicken/pihole:latest
    ```