mirror of
https://github.com/unifi-utilities/unifios-utilities.git
synced 2024-08-30 18:32:21 +00:00
2b90b4f156
* Update README.md Added AdguardHome * AdguardHome Added AdguardHome setup * Update README.md
24 lines
1.5 KiB
Bash
24 lines
1.5 KiB
Bash
#!/bin/sh
|
|
|
|
mkdir -p /opt/cni
|
|
ln -s /mnt/data/podman/cni/ /opt/cni/bin
|
|
ln -s /mnt/data/podman/cni/20-dns.conflist /etc/cni/net.d/20-dns.conflist
|
|
|
|
# Create a new bridge interface so the host can talk to containers inside the podman macvlan network
|
|
# Assumes your Podman network made in the controller is on VLAN 5
|
|
# Adjust the IP to match the address in your cni configuration
|
|
ip link add br5.mac link br5 type macvlan mode bridge
|
|
ip link set br5 promisc on
|
|
ip link set br5.mac promisc on
|
|
ip addr add 10.0.5.2/24 dev br5.mac
|
|
ip link set br5.mac up
|
|
ip route add 10.0.5.3/32 dev br5.mac proto static scope link
|
|
#Remove the # on the line below when Docker container is deployed.
|
|
#podman start AdguardHome
|
|
|
|
#Adjust these rules to your setup and interfaces
|
|
iptables -t nat -C PREROUTING -i br0 -p udp ! --source 10.0.5.3 ! --destination 10.0.5.3 --dport 53 -j DNAT --to 10.0.5.3 || iptables -t nat -A PREROUTING -i br0 -p udp ! --source 10.0.5.3 ! --destination 10.0.5.3 --dport 53 -j DNAT --to 10.0.5.3
|
|
iptables -t nat -C PREROUTING -i br0 -p tcp ! --source 10.0.5.3 ! --destination 10.0.5.3 --dport 53 -j DNAT --to 10.0.5.3 || iptables -t nat -A PREROUTING -i br0 -p tcp ! --source 10.0.5.3 ! --destination 10.0.5.3 --dport 53 -j DNAT --to 10.0.5.3
|
|
iptables -t nat -C POSTROUTING -o br0 -d 10.0.5.3 -p tcp --dport 53 -j MASQUERADE || iptables -t nat -A POSTROUTING -o br0 -d 10.0.5.3 -p tcp --dport 53 -j MASQUERADE
|
|
iptables -t nat -C POSTROUTING -o br0 -d 10.0.5.3 -p udp --dport 53 -j MASQUERADE || iptables -t nat -A POSTROUTING -o br0 -d 10.0.5.3 -p udp --dport 53 -j MASQUERADE
|