4d25211b76
Signed-off-by: John Dorman <john@boostchicken.dev> |
||
---|---|---|
.. | ||
10-cloudflared.sh | ||
custom_pihole_dote.sh | ||
Dockerfile | ||
DoTE.Dockerfile | ||
README.md | ||
upd_pihole.sh |
Run Pi-hole on your UDM
Features
- Run Pi-hole on your UDM with a completely isolated network stack. This will not port conflict or be influenced by any changes on by Ubiquiti
- Persists through reboots and firmware updates.
Requirements
- You have successfully setup the on boot script described here
Customizations
Note: IP and VLAN settings for you pihole network, 20-dns-conflist and 10-dns.sh MUST all match each other.
-
Example settings for pihole network: Network Name: Pihole Host address: 10.0.5.1 Netmask: 24 VLAN ID: 5 Network Type: Standard Multicast DNS: Enable DHCP: None Ipv6 Interface Type: None
-
YOU WILL NEED TO CHANGE
20-dns.conflist
Change the line: "mac": "add 3 fake hex portions, replacing x's here 00:1c:b4:xx:xx:xx", to create a legitimate mac address that matches some vendor space(first 6 digits ). It needs to be unique on your network. The example gives one option. Locally administered mac addresses do not work.If you are using a different IP address than the example: Change these lines to match your settings: "address": "10.0.5.3/24", "gateway": "10.0.5.1"
If you are using a different VLAN than the example: Change this line to match your VLAN number: "master": "br5",
-
You MAY need to change
10-dns.sh
. If you are using a different IP address than the example: Change these lines to match your settings: IPV4_IP="10.0.5.3" IPV4_GW="10.0.5.1/24"If you are using a different VLAN than the example: Change this line to match your VLAN number: VLAN=5
If you want the pihole container to have a different name than the example: Change this line to match the different name: CONTAINER=pihole
-
If you want IPv6 support Use 20-dnsipv6.conflist and update 10-dns.sh with the IPv6 addresses. Also, please provide IPv6 servers to podman using --dns arguments.
Steps
Configuration files and scripts
1.0 Copy 05-install-cni-plugins.sh
to /mnt/data/on_boot.d
1.1 Execute chmod +x /mnt/data/on_boot.d/05-install-cni-plugins.sh
1.2 Execute /mnt/data/on_boot.d/05-install-cni-plugins.sh
2.0 On your controller, create a network with no DHCP server and give it a VLAN.(see example settings above).
2.1 Copy YOUR modified [20-dns.conflist
] to /mnt/data/podman/cni
2.2 Execute chmod +x /mnt/data/podman/cni/20-dns.conflist
2.3 Execute cp /mnt/data/podman/cni/20-dns.conflist /etc/cni/net.d/dns.conflist
To check progress - run the command:
```shell
podman network inspect dns
```
You should see a copy of your 20-dns.conflist displayed.
3.0 Copy your [10-dns.sh
] to /mnt/data/on_boot.d
3.1 Execute chmod +x /mnt/data/on_boot.d/10-dns.sh
3.2 Execute /mnt/data/on_boot.d/10-dns.sh
Create directories for persistent Pi-hole configuration
4.0 Execute the following commands:
mkdir -p /mnt/data/etc-pihole
mkdir -p /mnt/data/pihole/etc-dnsmasq.d
Create the pihole container
Note: --name MUST match the name you set in 10-dns.sh -e FTLCONF_REPLY_ADDR4 MUST be in the range you set for your pihole network -e TZ MUST match the timezone for your controller
The example uses these upstream DNS servers The following command sets the upstream DNS servers to 1.1.1.1
(Cloudflare DNS) and 8.8.8.8
(Google DNS).
If you want to use different upstream DNS servers, change the following lines:
--dns=1.1.1.1
--dns=8.8.8.8 \
If you want to run a DHCP server as well you need to add the following lines: --cap-add=NET_ADMIN
5.0 Run the following (or your modified version) by copy / pasting the entire set.
```sh
podman run -d \
--network dns \
--restart always \
--name pihole \
-e TZ="America/Los Angeles" \
--cap-add=NET_ADMIN \
-v "/mnt/data/etc-pihole/:/etc/pihole/" \
-v "/mnt/data/pihole/etc-dnsmasq.d/:/etc/dnsmasq.d/" \
--dns=127.0.0.1 \
--dns=1.1.1.1 \
--dns=8.8.8.8 \
--hostname pi.hole \
-e VIRTUAL_HOST="pi.hole" \
-e PROXY_LOCATION="pi.hole" \
-e FTLCONF_REPLY_ADDR4="10.0.5.3" \
-e IPv6="False" \
pihole/pihole:latest
```
The below errors are expected and acceptable:
> ```
> ERRO[0022] unable to get systemd connection to add healthchecks: dial unix /run/systemd/private: connect: no such file or directory
> ERRO[0022] unable to get systemd connection to start healthchecks: dial unix /run/systemd/private: connect: no such file or directory
> ```
6.0 Set the pihole admin password
```sh
podman exec -it pihole pihole -a -p YOURNEWPASSHERE
```
Set the new DNS in your UDM
7.0 Update your DNS Servers to 10.0.5.3
(or your custom ip) for each of your Networks (UDM GUI | Networks | Advanced | DHCP Name Server)
7.1 Access the pihole web interface like you would normally, e.g. http://10.0.5.3 if using the example
Upgrading your PiHole container
- Edit
upd_pihole.sh
script to use the samepodman run
command you used at installation. - Copy the
upd_pihole.sh
script to /mnt/data/scripts - Anytime you want to update your pihole installation, simply run
/mnt/data/scripts/upd_pihole.sh
Optional Builds
The cloudflared command is written in Go and is not very lightweight. In my experience, it's not made for long-term running. Instead, the project DoTe has a tiny memory footprint and operates on an event loop with some major optimisations for connection caching. It allows you to forward traffic to any DNS-over-TLS provider.
PiHole with CloudFlareD Command
podman run -d \
--network dns
--restart always \
--name pihole \
-e TZ="America/Los Angeles" \
-v "/mnt/data/etc-pihole/:/etc/pihole/" \
-v "/mnt/data/pihole/etc-dnsmasq.d/:/etc/dnsmasq.d/" \
--dns=127.0.0.1 \
--dns=1.1.1.1 \
--hostname pi.hole \
-e CLOUDFLARED_OPTS="--port 5053 --address 0.0.0.0" \
-e VIRTUAL_HOST="pi.hole" \
-e PROXY_LOCATION="pi.hole" \
-e ServerIP="10.0.5.3" \
-e PIHOLE_DNS_="127.0.0.1#5053" \
-e IPv6="False" \
boostchicken/pihole:latest
PiHole with DoTe
Simply copy the custom_pihole_dote.sh
script to /mnt/data/scripts
and run it
to forward all DNS traffic over TLS to Cloudflare 1.1.1.1 / 1.0.0.1. You can modify the
script to forward to different services with ease and full configuration
options including certificate pinning is available in the DoTe README here:
https://github.com/chrisstaite/DoTe/
podman run -d \
--network dns \
--restart always \
--name pihole \
-e TZ="America/Los Angeles" \
-v "/mnt/data/etc-pihole/:/etc/pihole/" \
-v "/mnt/data/pihole/etc-dnsmasq.d/:/etc/dnsmasq.d/" \
--dns=127.0.0.1 \
--dns=1.1.1.1 \
--hostname pi.hole \
-e CLOUDFLARED_OPTS="--port 5053 --address 0.0.0.0" \
-e VIRTUAL_HOST="pi.hole" \
-e PROXY_LOCATION="pi.hole" \
-e ServerIP="10.0.5.3" \
-e PIHOLE_DNS_="127.0.0.1#5053" \
-e IPv6="False" \
boostchicken/pihole-dote:latest