unifios-utilities/AdguardHome

Run AdguardHome on your UDM

Features

1. Run AdguardHome on your UDM with a completely isolated network stack. This will not port conflict or be influenced by any changes on by Ubiquiti
2. Persists through reboots and firmware updates.

Requirements

1. You have setup the on boot script described here
2. AdguardHome persists through firmware updates as it will store the configuration in a folder (you need to create this) It needs 2 folders, a Work and Configuration folder. Plese create the 2 folder in "/mnt/data/". In my example I created "AdguardHome-Confdir" and "AdguardHome-Workdir" The on-boot script needs to be setup after firmware update of UDM. When on-boot script is recreated, everything should work.

Customization

• Feel free to change 20-dns.conflist to change the IP address of the container. Make sure to update all ip references and the iptables rules in on_boot.sh. The IP address can be anywhere from x.x.x.3 to x.x.x.254. .1 is reserved for the gateway and .2 is reserved for the macvlan bridge.
• If you don't want to use vlan5, just replace br5 with br(vlanid) in on_boot.sh and 20-dns.conflist, also update all the ips accordingly

Steps

1. On your controller, make a Corporate network with no DHCP server and give it a VLAN. For this example we are using VLAN 5.
2. Install the CNI plugins with by executing install-cni-plugins.sh on your UDM
3. Copy 20-dns.conflist to /mnt/data/podman/cni (or a place of your choosing and update on_boot.sh symlink). This will create your podman macvlan network
4. Update your on_boot.sh to include the commands in on_boot.sh. You can leave out the iptables rules if you don't want to DNAT all DNS calls to your AdGuard instance
5. Execute on_boot.sh
6. Run the AdguardHome docker container, be sure to make the directories for your persistent AdguardHome configuration. They are mounted as volumes in the command below.

podman run -d --network dns --restart always  \
    --name adguardhome \
    -v "/mnt/data/AdguardHome-Confdir/:/opt/adguardhome/conf/" \
    -v "/mnt/data/AdguardHome-Workdir/:/opt/adguardhome/work/" \
    --dns=127.0.0.1 --dns=1.1.1.1 \
    --hostname adguardhome \
    adguard/adguardhome:arm64-latest

7. Change on_boot.sh line 17 From

#podman start AdguardHome

To

podman start AdguardHome

This makes sure that the AdguardHome container will start after reboot of UDM. 8. Browse to 10.0.5.3:3000 and follow the setup wizard 9. Update your DNS Servers to 10.0.5.3 (or your custom ip) in all your DHCP configs. 10. Access the AdguardHome like you would normally.