mirror of
https://github.com/unifi-utilities/unifios-utilities.git
synced 2024-08-30 18:32:21 +00:00
111 lines
4.4 KiB
Bash
111 lines
4.4 KiB
Bash
#!/bin/bash
|
|
# Get DataDir location
|
|
DATA_DIR="/data"
|
|
case "$(ubnt-device-info firmware || true)" in
|
|
1*)
|
|
DATA_DIR="/mnt/data"
|
|
;;
|
|
2*)
|
|
DATA_DIR="/data"
|
|
;;
|
|
3*)
|
|
DATA_DIR="/data"
|
|
;;
|
|
*)
|
|
echo "ERROR: No persistent storage found." 1>&2
|
|
exit 1
|
|
;;
|
|
esac
|
|
## configuration variables:
|
|
VLAN=5
|
|
IPV4_IP="10.0.5.3"
|
|
# This is the IP address of the container. You may want to set it to match
|
|
# your own network structure such as 192.168.5.3 or similar.
|
|
IPV4_GW="10.0.5.1/24"
|
|
# As above, this should match the gateway of the VLAN for the container
|
|
# network as above which is usually the .1/24 range of the IPV4_IP
|
|
|
|
# if you want IPv6 support, generate a ULA, select an IP for the dns server
|
|
# and an appropriate gateway address on the same /64 network. Make sure that
|
|
# the 20-dns.conflist is updated appropriately. It will need the IP and GW
|
|
# added along with a ::/0 route. Also make sure that additional --dns options
|
|
# are passed to podman with your IPv6 DNS IPs when deploying the container for
|
|
# the first time. You will also need to configure your VLAN to have a static
|
|
# IPv6 block.
|
|
|
|
# IPv6 Also works with Prefix Delegation from your provider. The gateway is the
|
|
# IP of br(VLAN) and you can pick any ip address within that subnet that dhcpv6
|
|
# isn't serving
|
|
IPV6_IP=""
|
|
IPV6_GW=""
|
|
|
|
# set this to the interface(s) on which you want DNS TCP/UDP port 53 traffic
|
|
# re-routed through the DNS container. separate interfaces with spaces.
|
|
# e.g. "br0" or "br0 br1" etc.
|
|
FORCED_INTFC=""
|
|
|
|
# container name; e.g. nextdns, pihole, adguardhome, etc.
|
|
CONTAINER=pihole
|
|
|
|
if ! test -f /opt/cni/bin/macvlan; then
|
|
echo "Error: CNI plugins not found. You can install it with the following command:" >&2
|
|
echo " curl -fsSLo ${DATA_DIR}/on_boot.d/05-install-cni-plugins.sh https://raw.githubusercontent.com/unifi-utilities/unifios-utilities/main/cni-plugins/05-install-cni-plugins.sh && /bin/sh ${DATA_DIR}/on_boot.d/05-install-cni-plugins.sh" >&2
|
|
exit 1
|
|
fi
|
|
|
|
# set VLAN bridge promiscuous
|
|
ip link set "br${VLAN}" promisc on
|
|
|
|
# create macvlan bridge and add IPv4 IP
|
|
ip link add "br${VLAN}.mac" link "br${VLAN}" type macvlan mode bridge
|
|
ip addr add "${IPV4_GW}" dev "br${VLAN}.mac" noprefixroute
|
|
|
|
# (optional) add IPv6 IP to VLAN bridge macvlan bridge
|
|
if [ -n "${IPV6_GW}" ]; then
|
|
ip -6 addr add "${IPV6_GW}" dev "br${VLAN}.mac" noprefixroute
|
|
fi
|
|
|
|
# set macvlan bridge promiscuous and bring it up
|
|
ip link set "br${VLAN}.mac" promisc on
|
|
ip link set "br${VLAN}.mac" up
|
|
|
|
# add IPv4 route to DNS container
|
|
ip route add "${IPV4_IP}/32" dev "br${VLAN}.mac"
|
|
|
|
# (optional) add IPv6 route to DNS container
|
|
if [ -n "${IPV6_IP}" ]; then
|
|
ip -6 route add "${IPV6_IP}/128" dev "br${VLAN}.mac"
|
|
fi
|
|
|
|
# Make DNSMasq listen to the container network for split horizon or conditional forwarding
|
|
if ! grep -qxF "interface=br${VLAN}.mac" /run/dnsmasq.conf.d/custom.conf; then
|
|
echo "interface=br${VLAN}.mac" >>/run/dnsmasq.conf.d/custom.conf
|
|
kill -9 "$(cat /run/dnsmasq.pid)"
|
|
fi
|
|
|
|
if podman container exists "${CONTAINER}"; then
|
|
podman start "${CONTAINER}"
|
|
else
|
|
logger -s -t podman-dns -p "ERROR Container ${CONTAINER} not found, make sure you set the proper name, you can ignore this error if it is your first time setting it up"
|
|
fi
|
|
|
|
# (optional) IPv4 force DNS (TCP/UDP 53) through DNS container
|
|
for intfc in ${FORCED_INTFC}; do
|
|
if [ -d "/sys/class/net/${intfc}" ]; then
|
|
for proto in udp tcp; do
|
|
prerouting_rule="PREROUTING -i ${intfc} -p ${proto} ! -s ${IPV4_IP} ! -d ${IPV4_IP} --dport 53 -j LOG --log-prefix [DNAT-${intfc}-${proto}]"
|
|
iptables -t nat -C ${prerouting_rule} 2>/dev/null || iptables -t nat -A ${prerouting_rule}
|
|
prerouting_rule="PREROUTING -i ${intfc} -p ${proto} ! -s ${IPV4_IP} ! -d ${IPV4_IP} --dport 53 -j DNAT --to ${IPV4_IP}"
|
|
iptables -t nat -C ${prerouting_rule} 2>/dev/null || iptables -t nat -A ${prerouting_rule}
|
|
|
|
# (optional) IPv6 force DNS (TCP/UDP 53) through DNS container
|
|
if [ -n "${IPV6_IP}" ]; then
|
|
prerouting_rule="PREROUTING -i ${intfc} -p ${proto} ! -s ${IPV6_IP} ! -d ${IPV6_IP} --dport 53 -j LOG --log-prefix [DNAT-${intfc}-${proto}]"
|
|
ip6tables -t nat -C ${prerouting_rule} 2>/dev/null || ip6tables -t nat -A ${prerouting_rule}
|
|
prerouting_rule="PREROUTING -i ${intfc} -p ${proto} ! -s ${IPV6_IP} ! -d ${IPV6_IP} --dport 53 -j DNAT --to ${IPV6_IP}"
|
|
ip6tables -t nat -C ${prerouting_rule} 2>/dev/null || ip6tables -t nat -A ${prerouting_rule}
|
|
fi
|
|
done
|
|
fi
|
|
done
|