unifios-utilities/nspawn-container/scripts/10-setup-network.sh
2023-11-29 14:56:21 -08:00

84 lines
3.7 KiB
Bash

#!/bin/bash
# This script will create a macvlan bridge interface to allow communication
# between container networks and host networks.
# An interface called brX.mac will be created, where X = $VLAN configured below.
# The interface will be assigned an IP of $IPV4_GW, and $IPV6_GW configured below.
# Routes will be added for the container IP $IPV4 and $IPV6.
# Script is based on 10-dns.sh from unifios-utilities.
## CONFIGURATION VARIABLES
# VLAN ID network container will be on. This VLAN has to first be configured as a
# network in Unifi Network settings with a unique IP/subnet. Do not use the same
# IP in the unifi network settings as you will use below for IPV4_IP or IPV4_GW.
VLAN=5
# IP addresses of container.
IPV4_IP="10.0.5.3"
# Gateway IP address of macvlan interface. IP above should be in this subnet.
IPV4_GW="10.0.5.1/24"
# IPv6 container and gateway addresses. These can be empty if not using IPv6.
# Preferably generate your own ULA instead of using the default one below.
# A public IPv6 prefix based on your ISP's prefix can be used too, but any
# prefix changes for dynamic IPv6 prefixes have to be modified manually.
IPV6_IP="fd62:89a2:fda9:e23::3"
IPV6_GW="fd62:89a2:fda9:e23::1/64"
# Set this to the interface(s) on which you want DNS TCP/UDP port 53 traffic
# re-routed through this container. Separate interfaces with spaces.
# This is useful when runinng a DNS service, like Adguard Home
# e.g. "br0" or "br0 br1" etc.
FORCED_INTFC=""
## END OF CONFIGURATION
# set VLAN bridge promiscuous
ip link set "br${VLAN}" promisc on
# create macvlan bridge and add IPv4 IP
ip link add "br${VLAN}.mac" link "br${VLAN}" type macvlan mode bridge
ip addr add "${IPV4_GW}" dev "br${VLAN}.mac" noprefixroute
# (optional) add IPv6 IP to VLAN bridge macvlan bridge
if [ -n "${IPV6_GW}" ]; then
ip -6 addr add "${IPV6_GW}" dev "br${VLAN}.mac" noprefixroute
fi
# set macvlan bridge promiscuous and bring it up
ip link set "br${VLAN}.mac" promisc on
ip link set "br${VLAN}.mac" up
# add IPv4 route to container
ip route add "${IPV4_IP}/32" dev "br${VLAN}.mac"
# (optional) add IPv6 route to container
if [ -n "${IPV6_IP}" ]; then
ip -6 route add "${IPV6_IP}/128" dev "br${VLAN}.mac"
fi
# Make DNSMasq listen to the container network for split horizon or conditional forwarding
if ! grep -qxF "interface=br${VLAN}.mac" /run/dnsmasq.conf.d/custom.conf; then
echo "interface=br${VLAN}.mac" >>/run/dnsmasq.conf.d/custom.conf
kill -9 "$(cat /run/dnsmasq.pid)"
fi
# (optional) IPv4 force DNS (TCP/UDP 53) through DNS container
for intfc in ${FORCED_INTFC}; do
if [ -d "/sys/class/net/${intfc}" ]; then
for proto in udp tcp; do
prerouting_rule="PREROUTING -i ${intfc} -p ${proto} ! -s ${IPV4_IP} ! -d ${IPV4_IP} --dport 53 -j LOG --log-prefix [DNAT-${intfc}-${proto}]"
iptables -t nat -C ${prerouting_rule} 2>/dev/null || iptables -t nat -A ${prerouting_rule}
prerouting_rule="PREROUTING -i ${intfc} -p ${proto} ! -s ${IPV4_IP} ! -d ${IPV4_IP} --dport 53 -j DNAT --to ${IPV4_IP}"
iptables -t nat -C ${prerouting_rule} 2>/dev/null || iptables -t nat -A ${prerouting_rule}
# (optional) IPv6 force DNS (TCP/UDP 53) through DNS container
if [ -n "${IPV6_IP}" ]; then
prerouting_rule="PREROUTING -i ${intfc} -p ${proto} ! -s ${IPV6_IP} ! -d ${IPV6_IP} --dport 53 -j LOG --log-prefix [DNAT-${intfc}-${proto}]"
ip6tables -t nat -C ${prerouting_rule} 2>/dev/null || ip6tables -t nat -A ${prerouting_rule}
prerouting_rule="PREROUTING -i ${intfc} -p ${proto} ! -s ${IPV6_IP} ! -d ${IPV6_IP} --dport 53 -j DNAT --to ${IPV6_IP}"
ip6tables -t nat -C ${prerouting_rule} 2>/dev/null || ip6tables -t nat -A ${prerouting_rule}
fi
done
fi
done