Explains how to set-up launchers and cannons with backblast and overpressure areas with the ACE3 overpressure system.
framework
5
wiki
ace
major
minor
patch
3
0
0
1. Config Values
1.1 Launchers
classCfgWeapons{classMyLauncher{ace_overpressure_angle=60;// Cone in which the damage is applied (in degrees from the back end of the launcher)
ace_overpressure_range=15;// Range in meters in which the damage is applied
ace_overpressure_damage=0.7;// Damage multiplier
};};
1.2 Cannons
classCfgWeapons{classMyBananaCannon{ace_overpressure_angle=90;// Cone in which the damage is applied (in degrees from the muzzle of the cannon)
ace_overpressure_range=50;// Range in meters in which the damage is applied
ace_overpressure_damage=0.85;// Damage multiplier
};};
You can note that the angle range and damage values are higher, that's because this is a cannon and the backblast area is bigger.