cc-mek-scada/scada-common/constants.lua

73 lines
1.9 KiB
Lua
Raw Normal View History

2023-02-25 07:25:35 +00:00
--
-- System and Safety Constants
--
-- Notes on Radiation
-- - background radiation 0.0000001 Sv/h (99.99 nSv/h)
-- - "green tint" radiation 0.00001 Sv/h (10 uSv/h)
-- - damaging radiation 0.00006 Sv/h (60 uSv/h)
local constants = {}
--#region Reactor Protection System (on the PLC) Limits
local rps = {}
rps.MAX_DAMAGE_PERCENT = 90 -- damage >= 90%
rps.MAX_DAMAGE_TEMPERATURE = 1200 -- temp >= 1200K
rps.MIN_COOLANT_FILL = 0.10 -- fill < 10%
rps.MAX_WASTE_FILL = 0.95 -- fill > 95%
2023-02-25 07:25:35 +00:00
rps.MAX_HEATED_COLLANT_FILL = 0.95 -- fill > 95%
rps.NO_FUEL_FILL = 0.0 -- fill <= 0%
constants.RPS_LIMITS = rps
--#endregion
--#region Annunciator Limits
local annunc = {}
annunc.RCSFlowLow = -2.0 -- flow < -2.0 mB/s
annunc.CoolantLevelLow = 0.4 -- fill < 40%
annunc.ReactorTempHigh = 1000 -- temp > 1000K
annunc.ReactorHighDeltaT = 50 -- rate > 50K/s
annunc.FuelLevelLow = 0.05 -- fill <= 5%
annunc.WasteLevelHigh = 0.80 -- fill >= 80%
2023-02-26 19:17:35 +00:00
annunc.WaterLevelLow = 0.4 -- fill < 40%
2023-02-25 07:25:35 +00:00
annunc.SteamFeedMismatch = 10 -- ±10mB difference between total coolant flow and total steam input rate
annunc.RadiationWarning = 0.00001 -- 10 uSv/h
constants.ANNUNCIATOR_LIMITS = annunc
--#endregion
--#region Supervisor Alarm Limits
local alarms = {}
-- unit alarms
alarms.HIGH_TEMP = 1150 -- temp >= 1150K
alarms.HIGH_WASTE = 0.85 -- fill > 85%
2023-02-25 07:25:35 +00:00
alarms.HIGH_RADIATION = 0.00005 -- 50 uSv/h, not yet damaging but this isn't good
-- facility alarms
alarms.CHARGE_HIGH = 1.0 -- once at or above 100% charge
alarms.CHARGE_RE_ENABLE = 0.95 -- once below 95% charge
alarms.FAC_HIGH_RAD = 0.00001 -- 10 uSv/h
constants.ALARM_LIMITS = alarms
--#endregion
--#region Supervisor Constants
-- milliseconds until turbine flow is assumed to be stable enough to enable coolant checks
constants.FLOW_STABILITY_DELAY_MS = 15000
--#endregion
return constants