gravity-sync/CHANGELOG.md

The Changelog

2.1

The Backup Release

A new function ./gravity-sync.sh backup will now perform a sqlite operated backup of the gravity.db on the local Pi-hole.

2.0

The Smart Release

In this release, Gravity Sync will now detect not only if each component (gravity.db and custom.list) has changed since the last sync, but also what direction they need to go. It will then initate a push and/or pull specific to each piece.

Example: If the gravity.db has been modified on the primary Pi-hole, but the custom.list file has been changed on the secondary, Gravity Sync will now do a pull of the gravity.db then push custom.list and finally restart the correct components on each server. It will also now only perform a sync of each component if there are changes within each type to replicate. So if you only make a small change to your Local DNS settings, it doesn't kickoff the larger gravity.db replication.

The default command for Gravity Sync is now just ./gravity-sync.sh -- but you can also run ./gravity-sync.sh smart if you feel like it, and it'll do the same thing.

This allows you to be more flexible in where you make your configuration changes to block/allow lists and local DNS settings being made on either the primary or secondary, but it's best practice to continue making changes on one side where possible. In the event there are configuration changes to the same element (example, custom.list changes at both sides) then Gravity Sync will attempt to determine based on timestamps on what side the last changed happened, in which case the latest changes will be considered authoritative and overwrite the other side. Gravity Sync does not merge the contents of the files when changes happen, it simply overwrites the entire content.

New installs will use the smart function by default. Existing users who want to use this new method as their standard should run ./gravity-sync.sh automate function to replace the existing automated pull with the new Smart Sync. This is not required. The previous ./gravity-sync.sh pull and ./gravity-sync.sh push commands continue to function as they did previously, with no intention to break this functionality.

2.0.1

• Fixes bug that caused existing crontab entry not to be removed when switching from pull to Smart Sync. #50

2.0.2

• Correct output of smart function when script is run without proper function requested.
• Decided marketing team was correct about display of versions in CHANGELOG.md -- sorry Chris.
• Adds reference architectures to the ADVANCED.md file.
• Checks for RSYNC functionality to remote host during ./gravity-sync.sh configure and prompts to install. #53
• Move much of the previous README.md to ADVANCED.md file.

1.8

The Logical Release

There is nothing really sexy here, but a lot of changes under the covers to improve reliablity between different SSH client types. A lot of the logic and functions are more consistent and cleaner. In some cultures, fewer bugs and more reliablity are considered features. Much of this will continue through the 1.8.x line.

• SSH/RSYNC connection logic rewritten to be specific to client options between OpenSSH, OpenSSH w/ SSHPASS, and Dropbear.
• Key-pair generation functions rewritten to be specific to client options, also now works with no (or at least fewer) user prompts.
• SSHPASS options should be more reliable if used, but removes messages that SSHPASS is not installed during setup, if it's not needed and Redirects user to documentation.
• Adds custom port specification to ssh-copy-id and dropbearkey commands during configuration generation.
• Generally better error handling of configuration options.

1.8.1

• Detects if script is running as the root user or via sudo ./gravity-sync.sh and exits on error. #34

1.8.2

• Corrects issue where custom.list file would not replicate if the file didn't exist locally, and there were no other changes to replicate. #39

1.8.3

• Simplified method for input of automation frequency when running ./gravity-sync.sh automate function.
• Now removes existing automation task from crontab, if it exists, when re-running automate function.
• Automation can be disabled by setting frequency to 0 when prompted.
• Adds dev tag to ./gravity-sync.sh version output for users running off the development branch.

1.7

The Andrew Release

Features

• Gravity Sync will now manage the custom.list file that contains the "Local DNS Records" function within the Pi-hole interface.
• If you do not want this feature enabled it can be bypassed by adding a SKIP_CUSTOM='1' to your .conf file.
• Sync will be trigged during a pull operation if there are changes to either file.

Known Issues

• No new Star Trek references.

1.7.1

• There is a changelog file now. I'm mentioning it in the changelog file. So meta.
• ./gravity-sync.sh version will check for and alert you for new versions.

1.7.2

This update changes the way that beta/development updates are applied. To continue receving the development branch, create an empty file in the gravity-sync folder called dev and afterwards the standard ./gravity-sync.sh update function will apply the correct updates.

cd gravity-sync
touch dev
./gravity-sync.sh update

Delete the dev file and update again to revert back to the stable/master branch.

1.7.3

• Cleaning up output of argument listing

Deprecation

• Removes beta function for applying development branch updates.

1.7.4

• ./gravity-sync.sh dev will now toggle dev flag on/off. No touch required, although it still works that way under the covers. Improvement of methods added in 1.7.2.
• ./gravity-sync.sh update performs better error handling.
• Slightly less verbose in some places to make up for being more verbose in others.
• [DONE] has become [ OK ] in output.
• [INFO] header is now yellow all the way across.
• Tightens up verbage of status messages.
• Fixes custom.list not being processed by ./gravity-sync.sh restore function.
• Detects absence of ssh client command on host OS (DietPi)
• Detects absence of rsync client command on host OS (DietPi)
• Detects absence of ssh-keygen utility on host OS and will use dropbearkey as an alternative (DietPi)
• Changelog polarity reversed after heated discussions with marketing team.

1.7.5

• No code changes!
• Primary README now only reflect "The Easy Way" to install and configure Gravity Sync
• "The Less Easy Way" are now part of ADVANCED.md
• All advanced configuration options are outlined in ADVANCED.md

1.7.6

• Detects dbclient install as alternative to OpenSSH Client.
• Attempts to install OpenSSH Client if not found, and Dropbear is not alternative.
• Fix bug with dropbearkey not finding .ssh folder.
• Numerous fixes to accomidate DietPi in general.
• Fixes issue where compare function would show changes where actually none existed.
• [WARN] header is now purple all the way across, consistent with [INFO] as of 1.7.4.
• Fixes issue where custom.list would only pull if the file already existed on the secondary Pi-hole.
• One new Star Trek reference.

1.7.7

• config function will attempt to ping remote host to validate network connection, can by bypassed by adding PING_AVOID='1' to your gravity-sync.conf file.
• Changes some [INFO] messages to [WARN] where approprate.
• Adds aliases for more Gravity Sync functions.
• Shows current version on each script execution.
• Adds time output to Aborting message (exit without change.)
• Includes parsing of functions in time calculation.
• Checks for existance of Pi-hole binaries during validation.
• Less chatty about each step of configuration validation if it completes.
• Less chatty about replication validation if it's not necessary.
• Less chatty about file validation if no changes are required.
• When applying update in DEV mode, the Git branch used will be shown.
• Validates log export operation.

1.6

The Restorative Release

Features

• New ./gravity-sync.sh restore function will bring a previous version of the gravity.db back from the dead.
• Changes the way that Gravity Sync prompts for data input and how confirmation prompts are handled.
• Adds ability to override verification of 'push', 'restore' or 'config' reset, see .example file for details.
• Five new Star Trek references.

Bug Fixes

• New functions add consistency in status output.

1.5

The Automated Release

Features

• You can now easily deploy the task automation via crontab by running ./gravity-sync.sh automate which will simply ask how often you'd like to run the script per hour, and then create the entry for you.
• If you've already configured an entry for this manually with a prior version, the script should detect this and ask that you manually remove it or edit it via crontab -e. I'm hesitant to delete existing entries here, as it could potentially remove something unrelated to Gravity Sync.

Bug Fixes

• Changes the method for pulling development branch updates via the 'beta' function.
• Cleanup of various exit commands.

1.4

The Configuration Release

Features

• Adds new ./gravity-sync config feature to simplify deployment!
• Adds variables for SSH settings.
• Rearranges functions, which impacts nothing.
• All new and exciting code comments.
• No new Star Trek references.

1.4.1

• Adds variables for custom log locations to gravity-sync.conf, see .example file for listing.

1.4.2

• Will prompt to create new gravity-sync.conf file when run without an existing configuration.

1.4.3

• Bug fixes around not properly utilizing custom SSH keyfile.

1.3

The Comparison Release

1.3 should be called 2.0, but I'll resist that temptation -- but there are so many new enhancements!

Features

• Gravity Sync will now compare remote and local databases and only replicate if it detects a difference.
• Verifies most commands complete before continuing each step to fail more gracefully.
• Additional debugging options such as checking last cronjob output via ./gravity-sync.sh cron if configured.
• Much more consistency in how running commands are processed in interactive mode.

1.3.1

• Changes [GOOD] to [DONE] in execution output.
• Better validation of initial SSH connection.
• Support for password based authentication using SSHPASS.

1.3.2

• MUCH cleaner output, same great features.

1.3.3

• Corrected Pihole bin path issue that cause automated sync not to reload services.

1.3.4

• Moves backup of local database before initiating remote pull.
• Validates file ownership and permissions before attempting to rewrite.
• Added two Star Trek references.

1.2

The Functional Release

• Refactored process to use functions and cleanup process of execution.
• Does not look for permission to update when run.
• Cleanup and expand comments.

1.2.1

• Improved logging functions.

1.2.2

• Different style for status updates.

1.2.3

• Uses a dedicated backup folder for .backup and .last files.
• Copies db instead of moving to rename and then replacing to be more reliable.
• Even cleaner label status.

1.2.4

• Changes ~ to $HOME.
• Fixes bug that prevented sync from working when run via crontab.

1.2.5

• Push function now does a backup, on the secondary PH, of the primary database, before pushing.

1.1

The Pushy Release

• Seperated main purpose of script into pull argument.
• Allow process to reverse back using push argument.

1.1.2

• First release since move from being just a Gist.
• Just relearning how to use GitHub, minor bug fixes.

1.1.3

• Now includes example an configuration file.

1.1.4

• Added update script.
• Added version check.

1.1.5

• Added ability to view logs with ./gravity-sync.sh logs.

1.1.6

• Code easier to read with proper tabs.

1.0

The Initial Release

No version control, variables or anything fancy. It only worked if everything was exactly perfect.

echo 'Copying gravity.db from HA primary'
rsync -e 'ssh -p 22' ubuntu@192.168.7.5:/etc/pihole/gravity.db /home/pi/gravity-sync
echo 'Replacing gravity.db on HA secondary'
sudo cp /home/pi/gravity-sync/gravity.db /etc/pihole/ 
echo 'Reloading configuration of HA secondary FTLDNS from new gravity.db'
pihole restartdns reload-lists

For real, that's it. 6 lines, and could probably have be done with less.