Add #speedboatrace data

files/TTratrigvcore3speedbenchyconfig.ini

@@ -0,0 +1,255 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2021-07-01 at 07:02:41 UTC
+
+[print:Rat Rig V-core 3]
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0
+bridge_acceleration = 0
+bridge_angle = 0
+bridge_flow_ratio = 1
+bridge_speed = 400
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = 
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+draft_shield = 0
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 0
+external_perimeter_extrusion_width = 0.5
+external_perimeter_speed = 400
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.5
+fill_angle = 45
+fill_density = 10%
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0.5
+first_layer_height = 0.25
+first_layer_speed = 400
+gap_fill_speed = 400
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 0
+infill_every_layers = 2
+infill_extruder = 1
+infill_extrusion_width = 0.5
+infill_first = 0
+infill_only_where_needed = 1
+infill_overlap = 30%
+infill_speed = 400
+inherits = 
+interface_shells = 0
+layer_height = 0.25
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.5
+perimeter_speed = 400
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 1
+skirt_distance = 6
+skirt_height = 1
+skirts = 0
+slice_closing_radius = 0.049
+small_perimeter_speed = 400
+solid_infill_below_area = 0.001
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.5
+solid_infill_speed = 400
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_synchronize_layers = 0
+support_material_threshold = 0
+support_material_with_sheath = 1
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 12
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 0.5
+top_solid_infill_speed = 400
+top_solid_layers = 3
+top_solid_min_thickness = 0
+travel_speed = 400
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
+[filament:Rat Rig V-core 3]
+bed_temperature = 70
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 0
+disable_fan_first_layers = 2
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 0.88
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #29B2B2
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_density = 0
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = ABS
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = (Unknown)
+filament_wipe = nil
+first_layer_bed_temperature = 70
+first_layer_temperature = 265
+inherits = 
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; Filament gcode\n"
+temperature = 265
+
+[printer:Rat Rig V-core 3]
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,300x0,300x300,0x300
+before_layer_gcode = TIMELAPSE_TAKE_FRAME
+between_objects_gcode = 
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = ""
+default_print_profile = 
+deretract_speed = 0
+end_gcode = G28 X0 Y0 ; home X axis and y axis\nTIMELAPSE_TAKE_FRAME\nM104 S0 ; kill extruder temperature\nM140 S0 ; kill bed temperature\nM107; kill fan\nM84 ; disable motors\nled_off\nTIMELAPSE_RENDER
+extra_loading_move = -2
+extruder_colour = ""
+extruder_offset = 0x0
+gcode_flavor = reprap
+high_current_on_filament_swap = 0
+host_type = octoprint
+inherits = 
+layer_gcode = 
+machine_max_acceleration_e = 10000,5000
+machine_max_acceleration_extruding = 10000,1250
+machine_max_acceleration_retracting = 10000,1250
+machine_max_acceleration_x = 10000,1000
+machine_max_acceleration_y = 10000,1000
+machine_max_acceleration_z = 10000,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 500,200
+machine_max_feedrate_y = 500,200
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 2.5,2.5
+machine_max_jerk_x = 10,10
+machine_max_jerk_y = 10,10
+machine_max_jerk_z = 0.2,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_layer_height = 0
+max_print_height = 300
+min_layer_height = 0.07
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+print_host = 
+printer_model = 
+printer_notes = 
+printer_settings_id = 
+printer_technology = FFF
+printer_variant = 
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+remaining_times = 0
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 0.9
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 60
+serial_port = 
+serial_speed = 250000
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = M104 S[first_layer_temperature]\nSET_VELOCITY_LIMIT ACCEL=30000\nSET_VELOCITY_LIMIT ACCEL_TO_DECEL=30000\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=30\nled_on\nG28 ; home all axes\nZ_TILT_ADJUST\nG28 Z ; home Z only\nM109 S[first_layer_temperature]\nG92 E0.0\nG1 X10 Y10 Z0.2 F6000;\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0
+thumbnails = 
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+variable_layer_height = 0
+wipe = 0
+z_offset = 0
+
+[presets]
+print = Rat Rig V-core 3
+sla_print = 
+sla_material = 
+printer = Rat Rig V-core 3
+filament = Rat Rig V-core 3