Mirrored_Repos/teachingtechYT.github.io
1
0
Fork 0
mirror of https://github.com/teachingtechYT/teachingtechYT.github.io.git synced 2024-08-30 18:23:26 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #42 from sdaitzman/patch-1

Browse Source 
fixes typo
This commit is contained in:
teachingtechYT
2020-08-17 11:01:52 +10:00
committed by GitHub
parent 471bad3a83 61f4a0bd4a
commit d0ec7bacc8
1 changed files with 1 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
calibration.html
View File

@ -89,7 +89,7 @@
<h4>Nozzle</h4>
<p>It is worth heating up the nozzle and pushing some filament through to see if it is exiting the nozzle properly. If the diameter is inconsistent or the extruded plastic shoots to one side, it may indicate a partial blockage in the nozzle that will be a pain in the future. It is also worth checking if the nozzle is properly tightened. Only do this when it is hot or you may break it.</p>
<h4>Belts</h4>
<p>Ensure all belts are properly alinged and tensioned sufficiently. Also check the grub screws are tight on the pulleys that connect the belts to the stepper motors.</p>
<p>Ensure all belts are properly aligned and tensioned sufficiently. Also check the grub screws are tight on the pulleys that connect the belts to the stepper motors.</p>
<h4>Fans</h4>
<p>Check all fans are spinning freely. This includes but is not limited to: mainboard cooling fan, heat sink fan, part cooling fan, PSU fan. It can be hard to diagose if a fan is performing at less than full capacity. It may be easier to simply replace than repair if you suspect a fan is failing.</p>
<p>Another suitable video for seeing some of these procedures is here:</p>