2d705aac1b
Add guides for terminal and SSH
2022-01-20 16:21:49 +11:00
f5761ed038
Add x/y offset option
...
For unusual printer coordinate systems
#380
2021-12-13 10:43:00 +11:00
35cc3e2910
Add 0.35mm nozzle 0.2mm layer height tests
...
#379
2021-12-13 09:40:36 +11:00
d80639671c
Add note for first layer
...
Per Cedric
2021-12-03 12:42:00 +11:00
66898457a0
Change linked gcode viewer
2021-11-29 09:30:43 +11:00
641e7eb200
Typo
2021-11-24 07:34:14 +11:00
4d6da752ef
Increase e-steps accuracy to 5 decimal places
2021-11-23 16:02:31 +11:00
3a631bc529
Add note about cooler homing/ABL
...
#378
2021-11-23 07:39:49 +11:00
bf177e177d
Add 0.15mm nozzle at 0.08mm layer height tests
...
#374
2021-11-16 09:03:44 +11:00
5fa75b3753
Add delta printer check box for acc test
...
#375
2021-11-16 08:32:45 +11:00
625d9a57e5
Add speed tower test, tweak start gcode preheating
...
#258
Hot end temperature target is now set to 50 degrees less than target temperature for homing and probing, and then set to the actual target temperature before the print starts.
2021-11-12 15:52:16 +11:00
7d62584e51
Add support for SuperSlicer and ideaMaker
...
#360
2021-11-02 11:31:50 +11:00
62502ae75e
Add video embed and reorder
2021-10-29 17:11:48 +11:00
e22a3c6d21
Add draft Neopixel page
2021-10-29 08:37:46 +11:00
b9da6be8ca
Scaling tweak
...
#373
2021-10-27 08:25:43 +11:00
ffca62bd28
Fix typos and html errors
...
#371
2021-10-18 09:21:11 +11:00
799deccaee
Typo
2021-10-13 10:04:56 +11:00
32d401c2b4
Fix link
2021-09-28 08:49:37 +10:00
881d57d576
Add note for temp tower failures
2021-09-21 08:25:19 +10:00
0261a819e5
Merge pull request #365 from ChrisToxz/fix
...
fix: Error when creating settings summary of acceleration calibration settings
2021-09-13 10:51:26 +10:00
57ed7acabd
Add default start/end gcode to info tab.
2021-09-13 10:48:44 +10:00
37f2b6a154
Add additional instructions for acceleration testing and saving.
...
#368
2021-09-13 10:37:08 +10:00
402f70ad96
Remove M501 from all end gcode.
...
#368
2021-09-13 10:36:39 +10:00
65171a97f0
Correct retraction test instructions
2021-09-13 09:56:56 +10:00
4063727cad
Fix 0.5 0.3 temperature and retraction gcode
...
#367
2021-09-13 09:55:57 +10:00
538839fe30
Merge branch 'outputsummary' into fix
2021-09-10 20:26:57 +02:00
fb1eb38b81
fix: Error when creating settings summary of calibration settings
2021-09-10 20:23:52 +02:00
60f463aefc
Add nozzle diameter, layer height and feedrates in settings summary
2021-09-10 20:13:16 +02:00
aa0dba2726
Fix header blocking tabs on mobile
...
To address pull request #357
2021-09-08 10:28:28 +10:00
f410db69d1
Merge pull request #364 from serenewaffles/patch-1
...
Fix Typo in upgrades.html
2021-09-07 09:58:59 +10:00
85bf4fcc5d
Fix Typo in upgrades.html
...
I am fairly certain "What is does" should be "What it does"
2021-09-06 17:18:23 -04:00
58b8d040c3
Add part cooling fan instructions to PID auto tune
...
#361
2021-09-03 10:49:20 +10:00
ee14ff3bcb
Add note warning of M83 in custom start gcode
...
#359
2021-08-31 20:38:41 +10:00
ff4f16f79f
Add missing 0.5mm / 0.3mm baseline gcode
...
#358
2021-08-31 10:59:09 +10:00
37caada02c
Add missing first layer for 0.5mm / 0.35mm
...
#354
2021-08-31 10:51:23 +10:00
1d3176cd9f
Fix custom feedrate ignored in first layer test
2021-08-23 17:50:17 +10:00
52384301f3
Merge pull request #348 from grego33/patch-1
...
Fixed a couple of typos
2021-08-11 11:12:31 +10:00
38b20eba02
Fixed a couple of typos
2021-08-10 20:46:50 -04:00
39c6ad03fb
Add bltouch firmware step
...
#341
2021-08-11 10:28:40 +10:00
6c04c7460a
Update Flow for Cura
...
#347
2021-08-09 09:32:47 +10:00
9f384b41e2
Invert inner/outer feedrate on accel test
...
#346
2021-08-08 12:05:03 +10:00
6a5ec11bb0
Merge pull request #342 from eindiran/patch-1
...
[Typo] Balance parentheses on PID Autotune page
2021-08-06 08:00:41 +10:00
d650addb02
Balance parens on PID Autotune page
2021-08-04 20:48:22 +00:00
e8f41c9aa3
Fix úndefined'text in firstlayer test
...
#340
2021-08-02 09:52:28 +10:00
5a8caf5e12
Add ability to use only custom start and end gcode
...
Patreon request!
2021-07-30 19:56:57 +10:00
7401874c91
Allow accel test to work with klipper
2021-07-29 09:00:37 +10:00
79a80bbe80
Merge pull request #306 from Logan-code/patch-1
...
Update gcodeprocessing.js
2021-07-29 08:55:35 +10:00
d2cb2685eb
Merge pull request #309 from fredrikbaberg/master
...
PrusaSlicer 2.3.1 uses horizontal shells instead of layers
2021-07-29 08:55:00 +10:00
8cc8431196
Merge branch 'master' of https://github.com/teachingtechYT/teachingtechYT.github.io
2021-07-29 08:35:27 +10:00
5036f93adb
Fix typo, add M82 note
2021-07-29 08:34:57 +10:00
