MrChuckDanger
c9a7ee4071
Added clarification for hardware_serial & baud_rate setting
...
Per #72 , added clarifications that setting baud_rate may be required on some ESP32 boards (mine is Huzzah32 Feather) or else you will go into boot loop.
Also, added detail to baud_rate setting that some heat pumps require 2400. Mine is MSZ-GL18NA, which only worked with 2400 (not 4800 or 9600). Note, the default swicago library will first try 2400, and then try 9600, if no explicit rate is provided.
2023-06-15 17:59:41 -07:00
donutsoft
1007b4d075
Remote temperature sensor update
2023-06-15 17:57:21 -07:00
Geoff Davis
430817ee3b
Merge branch 'develop' into patch-1
2023-06-15 17:08:19 -07:00
Geoff Davis
9da775567a
Merge pull request #93 from dmcc/patch-1
...
README.md: Minor markdown formatting/quoting
2023-06-15 17:04:05 -07:00
Geoff Davis
28eaf87ae6
Merge pull request #102 from TheDK/patch-1
...
Update README.md with info to avoid boot loop on ESP32
2023-06-15 16:50:07 -07:00
TheDK
87d0f5af1e
Update README.md
...
Add info to avoid boot loop on ESP32
2023-06-09 17:10:17 +02:00
David McClosky
50bb5b9c07
README.md: Minor markdown formatting/quoting
...
Without the quoting, I get config parsing errors for swing_mode.
2023-02-17 17:25:07 -05:00
Paul Nicholls
1066ab6f15
Make UART pins configurable (for ESP32)
...
Adds optional configuration for the UART RX and TX pins on platforms which support assigning arbitrary pins to hardware UART(s), i.e. ESP32.
2023-02-11 22:35:37 +13:00
MrChuckDanger
10949d3067
Added clarification for hardware_serial & baud_rate setting
...
Per #72 , added clarifications that setting baud_rate may be required on some ESP32 boards (mine is Huzzah32 Feather) or else you will go into boot loop.
Also, added detail to baud_rate setting that some heat pumps require 2400. Mine is MSZ-GL18NA, which only worked with 2400 (not 4800 or 9600). Note, the default swicago library will first try 2400, and then try 9600, if no explicit rate is provided.
2023-01-23 13:27:21 -05:00
Geoff Davis
bcba670a09
Clarify ESP32 vs ESP8266 in docs
2023-01-21 11:03:31 -08:00
Calum Ochkas
f4bf5037d5
Update README.md
2022-01-31 16:51:39 +13:00
Geoff Davis
d8ee6b69c2
update required esphome version
2021-06-23 04:53:51 -07:00
Mark Blakeney
6e3ea4989b
Fix esphome v1.19 changes
...
Addresses issue #37 .
2021-06-21 14:28:38 +10:00
Geoff Davis
b777cccdfe
Merge branch master into develop
2021-05-29 08:14:47 -07:00
Geoff Davis
6e95f1276f
Fix stray underscore
2021-05-29 08:12:52 -07:00
Geoff Davis
d98ab16302
Use substitutions in example YAML
...
Don't hard-code the node name or friendly name in the various component sections.
2021-05-28 13:52:10 -07:00
Geoff Davis
9bac1aa088
Comment out unused sections of demo
2021-05-28 13:34:16 -07:00
Simon Knopp
4cebb59611
Add support for set_remote_temperature()
2021-05-28 11:09:47 +12:00
Geoff Davis
c4ea4c14e1
Update documentation for external component
...
Add configuration variable reference.
Expand upon example configuration.
Add instructions for upgrading to version 2.0.x
2021-05-27 13:34:23 -07:00
Geoff Davis
11ab3f2cac
Correct update_interval parameter
2021-05-27 10:40:22 -07:00
Geoff Davis
c53dbc6e4b
Merge pull request #28 from sijk/external_component
...
Make this usable as an `external_component`
2021-05-27 10:24:07 -07:00
Simon Knopp
cc4022babb
Make this component work as a climate platform
...
I didn't understand initially how this was meant to be done. It makes
sense in hindsight.
2021-05-27 10:44:07 +12:00
Simon Knopp
cad0aee55e
Document the new configuration options
2021-05-26 21:51:43 +12:00
Simon Knopp
1aa42c9406
Update documentation to use external_components
2021-05-26 18:01:58 +12:00
Daniel Eisterhold
7f660a4f64
Add link to circuit section of README
2021-05-02 10:10:45 -05:00
Geoff Davis
7a18097fb7
Update README
...
Reference upstream swicago library via github URL, per @oddeirik. Fixes
GH-26
ESPHome 1.15.x has been out for a while now.
2021-04-28 10:38:02 -07:00
Geoff Davis
9a48ec6f3e
Update README
...
Reference upstream swicago library via github URL, per @oddeirik. Fixes
GH-26
ESPHome 1.15.x has been out for a while now.
2021-04-28 10:35:23 -07:00
Geoff Davis
10f08a68d4
Use upstream HeatPump library
...
SwiCago HeatPump has merged changes to variable initialization.
2020-03-18 07:44:08 -07:00
Geoff Davis
66b4efad8b
Add requirements section
...
Source code had requirements, but readme didn't.
For GH-1
2020-03-11 23:04:27 -07:00
Geoff Davis
e79d216cfc
Change I to The Author
2020-03-11 16:55:47 -07:00
Geoff Davis
9cc1c4e081
Even more doc tweaks.
2020-03-11 16:54:51 -07:00
Geoff Davis
3cdc870b4a
More examples, more references
2020-03-11 16:51:01 -07:00
Geoff Davis
e8641f9cb7
Fix urls
2020-03-11 16:25:00 -07:00
Geoff Davis
d2637ad8e3
Fix baud_rate text
2020-03-11 16:20:50 -07:00
Geoff Davis
8a0bba689d
Numerous documentation corrections
...
Change J105 to CN105.
Fix up formatting.
Add list of supported units from SwiCago.
2020-03-11 16:18:24 -07:00
Geoff Davis
8fa71878fa
Add see also section, update example config
2020-03-11 15:32:49 -07:00
Geoff Davis
32ff547c7b
Update README
2020-03-11 15:05:47 -07:00
Geoff Davis
d355025436
skeleton instructions
2020-03-11 10:22:35 -07:00
Geoff Davis
44f13b9c33
Initial commit
2020-03-11 09:36:56 -07:00
